• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.47-52
• /
• 2008

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, urban planing, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system based on the 2-D digital maps and contour lines has limitation in implementation in reproducing the 3-D spatial city. Currently, the LiDAR data which combines the laser and GPS skill has been introduced to obtain high resolution accuracy in the altitude measurement in the advanced country. In this paper, we first introduce the LiDAR based researches in advanced foreign countries, then we propose the data generation scheme and an solution algorithm for the optimal management of our 3-D spatial u-City construction. For this purpose, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional model with long distance for 3D u-city model generation.

• Journal of Korea Game Society
• /
• v.10 no.1
• /
• pp.147-156
• /
• 2010

In this paper, we propose 3D cloud animation by cloud modeling method of 2D images retrieved from a meteorological satellite. First, on the satellite images, we locate numerous control points to perform thin-plate spline warping analysis between consecutive frames for the modeling of cloud motion. In addition, the spectrum channels of visible and infrared wavelengths are used to determine the amount and altitude of clouds for 3D cloud image reconstruction. Pre-integrated volume rendering method is used to achieve seamless inter-laminar shades in real-time using small number of slices of the volume data. The proposed method could successfully construct continuously moving 3D clouds from 2D satellite images at an acceptable speed and image quality.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.5
• /
• pp.432-441
• /
• 2007

Image processing methods for an extraction of a nuclear fuel rod image and visualization methods of the RGB color data were studied with a sectional image of spent fuel assembly. The fuel rod images could be extracted by using a histogram analysis, an edge detection and RGB rotor data. In these results, a size of the spent fuel assembly could be measured by using a histogram analysis method and a shape of the spent fuel rod could be observed by using an edge detection method. Finally, a various analyses were established for status of the spent fuel assembly by realized various 3D images for the color data in an image of a spent fuel assembly.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.94-103
• /
• 2001

The goal of using numerical methods in this study is two-fold: to replicate a set of measured, individualized HRTFs by a computer simulation, and also to visualise the resultant sound field around the head. Two methods can be wed: the Boundary Element Method (BEM) and the Infinite-Finite Element Method (IFEM). This paper presents the results of a preliminary study carried out on a KEMAR dummy-head, the geometry of which was captured with a high accuracy 3-D laser scanner and digitiser. The scanned computer model was converted to a few valid BEM and IFEM meshes with different polygon resolutions, enabling us to optimise the simulation for different frequency ranges. The results show a good agreement between simulations and measurements of the sound pressure at the blocked ear-canal of the dummy-head. The principle of reciprocity provides an effect method to simulate HRTF database. The BEM was also used to investigate the total sound field around the head, providing a tool to visualise the sound field for different arrangements of virtual acoustic imaging systems.

• Journal of the Korea Society for Simulation
• /
• v.16 no.3
• /
• pp.57-63
• /
• 2007

In real time rendering of fetus the empty space leaping while traversing a ray is most frequently used accelerating technique. The main idea is to skip empty voxel samples which do not contribute the result image and it speeds up the rendering time by avoiding sampling data while traversing a ray in the empty region, saving a substantial number of interpolations. Calculating the distance from the nearest object boundary for every yokel can reduce the sampling operation. Among widely-well-known distance maps, those estimates the true distance, such as euclidean distance, takes a long time to compute because of the complicated floating-point operations, and others which uses approximated distance functions, such as city-block and chessboard, provides faster computation time but sampling error may can occur. In this paper, therefore, we analyze the characteristics of several distance maps and compare the number of samples and rendering time. And we aim to suggest the most appropriate distance map for rendering of fetus in ultrasound image.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.486-492
• /
• 2015

Radiation source imaging system is essential for protecting of radiation leakage accidents and minimizing damages from the radioactive materials, and is expected to play an important role in the nuclear plant decommissioning area. In this study, the stereoscopic camera principle was applied to develop a new radiation imaging device technology that can extract the radiation three-dimensional position information. This radiation three-dimensional imaging device (K3-RIS) was designed as a compact structure consisting of a radiation sensor, a CCD camera, and a pan-tilt only. It features the acquisition of stereoscopic radiation images by position change control, high-resolution detection by continuous scan mode control, and stereoscopic image signal processing. The performance analysis test of K3-RIS was conducted for a gamma-ray source(Cs-137) in radiation calibration facility. The test result showed that a performance error with less than 3% regardless of distances of the objects.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.141-149
• /
• 2010

Three-dimensional geo-spatial information is important for the efficient use and management of the country and the three-dimensional expression and analysis of urban projects, such as urban plans devised by local governments and urban management. Thanks to the revitalization of the geo-spatial information service industry, it is now being variously used not only in public but also private areas. For the creation of high-guiltily three-dimensional geo-spatial information, emphasis should be placed on not only the quality of the source image and three-dimensional geo-spatial model but also the level of visualization, such as level of detail and texturing. However, in the case of existing three-dimensional geo-spatial information, its establishment process is complicated and its data are not updated frequently enough, as it uses ready-created digital maps. In addition, as it uses Ortho Images, the images exist Relief displacement. As a result, the visibility is low and the three-dimensional models of artificial features are simplified to reach LoD between 2 and 3, making the images look less realistic. Therefore, this paper, analyzed the quality of three-dimensional geo-spatial information created using the three-dimensional modeling technique were applied using Digital photogrammetry technique, using digital aerial photo images by an existing large-format digital camera and multi-looking camera. The analysis of the accuracy of visualization information of three-dimensional models showed that the source image alone, without other visualization information, secured the accuracy of 84% or more and that the establishment of three-dimensional spatial information carried out simultaneously with filming made it easier to gain the latest data. The analysis of the location accuracy of true Ortho images used in the work process showed that the location accuracy was better than the allowable horizontal position accuracy of 1:1,000 digital maps.

• Journal of the Korea Computer Graphics Society
• /
• v.1 no.2
• /
• pp.279-283
• /
• 1995

21세기 정보화 시대에 효과적으로 대비하기 위해 세계 여러나라에서 추진하고 있는 정보화 사회를 구축하는데 필수적인 요소로 lnfrastructure인 초고속 정보 통신망을 구축하고 있다. 이에 따라 국내에서도 정부주도로 초고속망을 이용한 대국민 서비스 사업을 추진하고 있고, 이 사업의 일환으로 문화체육부에서도 국립중앙박물관을 중심으로 대국민 서비스용 문화정보망 구축을 추진하고 있다. 이러한 문화정보망 사업의 최종 목표는 종래의 개념을 넘어선 인간에게 가장 현실감을 줄 수 있는 "가상박물관"과 같이 문화재를 글, 그림 이외에 3차원 업체형상을 가진 문화재를 3차원적으로 표현하여 보이지 않는 부분을 볼 수 있도록 문화재를 이동, 회전 및 확대, 축소 표현이 가능한 3차원 형상정보 데이타베이스를 구축하여야 한다. 본 과제에서는 이러한 3차원 형상정보 데이타베이스 구축을 위해, 컴퓨터 그래픽스 기술과 인공지능 기술이 복합적으로 구현된 3차원 입체형상 자동 입력 시스템 및 모델링 시스템과 지원 도구 개발을 목표로 진행되고 있다. 이 시스템이 완성되면 문화재 형상의 영구보존, 문화재의 특성(크기,색,무늬,질감) 보존, 문화재 형상 복원 및 문화재의 시대적 상대평가를 용이하게 하는 효과를 얻을 뿐아니라, 컴퓨터 그래픽스 기술 및 정보처리 기술을 문화재 연구와 전시에 적용하여 문화정보망 사업의 구체적 효과를 가시화 할 수 있다.

• Journal of Korea Multimedia Society
• /
• v.5 no.5
• /
• pp.494-504
• /
• 2002

Volume rendering is a method of displaying volumetric data as a sequence two-dimensional image. Because this algorithm has an advantage of visualizing structures within objects, it has recently been used to analyze medical images i.e, MRI, PET, and SPECT. In this paper. we suggested a method for creating images easily from sampled volumetric data and applied the interpolation method to medical images. Additionally, we implemented and applied two kinds of interpolation methods to improve the image quality, linear interpolation and cubic interpolation at the sampling stage. Subsequently, we compared the results of volume rendered data using a transfer function. We anticipate a significant contribution to diagnosis through image reconstruction using a volumetric data set, because volume rendering techniques of medical images are the result of 3-dimensional data.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.1-11
• /
• 2023

This study intended to develop a technique for quantitatively and 3-dimensionally predicting the potential failure zone and impulse that may occur when trees are fall down. The main outcomes of this study are as follows. First, this study established the potential failure zone and impulse calculation formula in order to quantitatively calculate the risks generated when trees are fallen down. When estimating the potential failure zone, the calculation was performed by magnifying the height of trees by 1.5 times, reflecting the likelihood of trees falling down and slipping. With regard to the slope of a tree, the range of 360° centered on the root collar was set in the case of trees that grow upright and the range of 180° from the inclined direction was set in the case of trees that grow inclined. The angular momentum was calculated by reflecting the rotational motion from the root collar when the trees fell down, and the impulse was calculated by converting it into the linear momentum. Second, the program to calculate a potential failure zone and impulse was developed using Rhino3D and Grasshopper. This study created the 3-dimensional models of the shapes for topography, buildings, and trees using the Rhino3D, thereby connecting them to Grasshopper to construct the spatial information. The algorithm was programmed using the calculation formula in the stage of risk calculation. This calculation considered the information on the trees' growth such as the height, inclination, and weight of trees and the surrounding environment including adjacent trees, damage targets, and analysis ranges. In the stage of risk inquiry, the calculation results were visualized into a three-dimensional model by summarizing them. For instance, the risk degrees were classified into various colors to efficiently determine the dangerous trees and dangerous areas.