• Journal of Broadcast Engineering
• /
• v.22 no.3
• /
• pp.401-404
• /
• 2017

The 360 VR video has a format of a stereoscopic shape such as an isometric shape or a cubic shape or a cubic shape. Although these formats have different characteristics, they have in common that the resolution is higher than that of a normal 2D video. Therefore, it takes much longer time to perform coding/decoding on 360 VR video than 2D Video, so parallel processing techniques are essential when it comes to coding 360 VR video. HEVC, the state of art 2D video codec, uses Wavefront Parallel Processing (WPP) technology as a standard for parallelization. This technique is optimized for 2D videos and does not show optimal performance when used in 3D videos. Therefore, a suitable method for WPP is required for 3D video. In this paper, we propose WPP coding/decoding method which improves WPP performance on cube map format 3D video. The experiment was applied to the HEVC reference software HM 12.0. The experimental results show that there is no significant loss of PSNR compared with the existing WPP, and the coding complexity of 15% to 20% is further reduced. The proposed method is expected to be included in the future 3D VR video codecs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.827-833
• /
• 2012

In this paper, we propose an improved optical flow algorithm which reduces computational complexity as well as noise level. This algorithm reduces computational time by applying level simplification technique and removes noise by using eigenvectors of objects. Optical flow is one of the accurate algorithms used to generate depth information from two image frames using the vectors which track the motions of pixels. This technique, however, has disadvantage of taking very long computational time because of the pixel-based calculation and can cause some noise problems. The level simplifying technique is applied to reduce the computational time, and the noise is removed by applying optical flow only to the area of having eigenvector, then using the edge image to generate the depth information of background area. Three-dimensional images were created from two-dimensional images using the proposed method which generates the depth information first and then converts into three-dimensional image using the depth information and DIBR(Depth Image Based Rendering) technique. The error rate was obtained using the SSIM(Structural SIMilarity index).

• Broadcasting and Media Magazine
• /
• v.23 no.1
• /
• pp.33-45
• /
• 2018

최근 차세대 미디어 중 하나로 가상의 환경 내에서 극대화된 현실감 및 몰입감을 사용자에게 제공해 줄 수 있는 몰입형 미디어(Immersive Media)가 각광받고 있다. 이를 반영하듯 360도 전방위 영상을 이용한 VR미디어에 사용자의 움직임에 따라 자연스러운 사실감 및 입체감을 제공하는 Light Field 미디어 기술을 접목하려는 시도가 가속화되고 있으며, MPEG에서도 6DoF(Degrees of Freedom)기반의 LF 미디어를 서비스하기 위한 MPEG-I(Immersive) 표준화가 진행 중에 있다. 본 고에서는 LF 미디어 특성 및 이를 획득하고 재생하기 위한 요소기술 개발 현황을 살펴보고, LF 기술이 적용된 MPEG 표준화 동향을 소개한다.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.25-27
• /
• 2009

This paper presents the stereoscopic conversion of flame images. The stereoscopic conversion is a technology that generates left and right images from a monoscopic image. Even though many conversion methods have been introduced and commercialized so far, the processing of flame images is relatively few. Such conventional methods are effectively used either real-time or off-line. However, the application of such schemes to special-effect images such as flame is hard to be applied. The proposed method is designed to convert a flame image into a stereoscopic image. Depth map of flame regions are produced based on the analysis of color models of flames. Experimental results tested on diverse flame image sets validates the effectiveness of the proposed method.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.453-456
• /
• 2012

본 논문은 현대의 테크놀로지를 적극 수용하여 도시 공간 속 공공예술, 대중예술에서 좀 더 열린 체계의 예술작품에 가까이 다가가는 작업 형태를 지향하기 위한 기초 연구과정을 서술한다. 3차원의 입체적 오브젝트에 3차원 영상을 투사하는 프로젝션 매핑 기법을 활용한 작업을 시도하였으며, 그 작업을 소셜 네트워크와 연계하여 소셜 미디어를 활용한 인터랙티브 미디어파사드로 확장하고자 한다. 미디어아트의 작업 특성, 관람 체계 그리고 그 의미를 새로운 시각에서 바라보고자 한다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.3
• /
• pp.42-52
• /
• 2010

The purpose of this study is to produce digital elevation model (DEM) in the Jebu tidal flat, one of the west coast of the Korean Peninsula, by means of photogrammetric techniques from aerial digital stereo-images. Produced DEM would be become the fundamental data for change detection of the sediment and erosion. To do so, epipolar line is established by relative orientation. Area-based matching is then carried out based on this line and matching size according to surface property of tidal flat after a classified image is produced from reflectance and texture of the surface. As the results, DEM generated by the proposed method showed subtle changes in height more precisely than DEM using the fixed matching size and DEM by the commercial S/W in the region, such as tidal flats having few level differences.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.239-247
• /
• 2012

This paper is related to an Object VR-based virtual textile wearing system carrying out textile texture mapping based on viewpoint vector estimation and intensity difference map. The proposed system is characterized as capable of virtually wearing a new textile pattern selected by the user to the clothing shape section segmented from multi-view 2D images of clothes model for Object VR(Object Virtual Reality), and three-dimensionally viewing its virtual wearing appearance at multi-view points of the object. Regardless of color or intensity of model clothes, the proposed system is possible to virtually change the textile pattern with holding the properties of the selected clothing shape section, and also to quickly and easily simulate, compare, and select multiple textile pattern combinations for individual styles or entire outfits. The proposed system can provide higher practicality and easy-to-use interface, as it makes real-time processing possible in various digital environment, and creates comparatively natural and realistic virtual wearing styles, and also makes semi-automatic processing possible to reduce the manual works.

• Korean Journal of Remote Sensing
• /
• v.14 no.3
• /
• pp.213-222
• /
• 1998

Electro-Optical Camera(EOC) is the main payload of the KOrea Multi-Purpose SATellite(KOMPSAT) with the mission of cartography to build up a digital map of Korean territory including a Digital Terrain Elevation Map(DTEM). This instalment which comprises EOC Sensor Assembly and EOC Electronics Assembly produces the panchromatic images of 6.6 m GSD with a swath wider than 17 km by push-broom scanning and spacecraft body pointing in a visible range of wavelength, 510~730 nm. The high resolution panchromatic image is to be collected for 2 minutes during 98 minutes of orbit cycle covering about 800 km along ground track, over the mission lifetime of 3 years with the functions of programmable gain/offset and on-board image data storage. The image of 8 bit digitization, which is collected by a full reflective type F8.3 triplet without obscuration, is to be transmitted to Ground Station at a rate less than 25 Mbps. EOC was elaborated to have the performance which meets or surpasses its requirements of design phase. The spectral response, the modulation transfer function, and the uniformity of all the 2592 pixel of CCD of EOC are illustrated as they were measured for the convenience of end-user. The spectral response was measured with respect to each gain setup of EOC and this is expected to give the capability of generating more accurate panchromatic image to the users of EOC data. The modulation transfer function of EOC was measured as greater than 16 % at Nyquist frequency over the entire field of view, which exceeds its requirement of larger than 10 %. The uniformity that shows the relative response of each pixel of CCD was measured at every pixel of the Focal Plane Array of EOC and is illustrated for the data processing.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.77-88
• /
• 1998

Wedge shaped isodoses are desired in a number of clinical situations. Hard wedge filters have provided nominal angled isodoses with dosimetric consequences of beam hardening, increased peripheral dosing, nonidealized gradients at deep depths along with the practical consequendes of filter handling and placement problems. Dynamic wedging uses a combination of a moving collimator and changing monitor dose to achieve angled isodoses. The segmented treatment tables(STT) that monitor unit setting by every distance of moving collimator, was induced by numerical formular. The characteristics of dynamic wedge by STT compared with real dosimetry. Methods and Materials : The accelerator CLINAC 2100C/D at Yonsei Cancer Center has two photon energies (6MV and 10MV), currently with dynamic wedge angles of 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$ and 60$^{\circ}$. The segmented treatment tables(STT) that drive the collimator in concert with a changing monitor unit are unique for field sizes ranging from 4.0cm to 20.0cm in 0.5cm steps. Transmission wedge factors were measured for each STT with an standard ion chamber. Isodose profiles, isodose curves, percentage depth dose for dynamic wedge filters were measured with film dosimetry. Dynamic wedge angle by STT was well coincident with film dosimetry. Percent depth doses were found to be closer to open field but more shallow than hard wedge filter. The wedge transmission factor were decreased by increased the wedge angle and more higher than hard wedge filters. Dynamic wedging probided more consistent gradients across the field compared with hard wedge filters. Dynamic wedging has practical and dosimetric advantages over hard filters for rapid setup and keeping from table collisions. Dynamic wedge filters are positive replacement for hard filters and introduction of dynamic conformal radiotherapy and intensity modulation radiotherapy in a future.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.19-26
• /
• 2008

This paper is related to a new technology allowing a user to have a 360 degree viewpoint of the virtual wearing object, and to an object VR(Virtual Reality)-based 2D virtual textile wearing system using viewpoint vector estimation and textile texture mapping. The proposed system is characterized as capable of virtually wearing a new textile pattern selected by the user to the clothing shape section segmented from multiview 2D images of clothes model for object VR, and three-dimensionally viewing its virtual wearing appearance at a 360 degree viewpoint of the object. Regardless of color or intensity of model clothes, the proposed system is possible to virtually change the textile pattern with holding the illumination and shading properties of the selected clothing shape section, and also to quickly and easily simulate, compare, and select multiple textile pattern combinations for individual styles or entire outfits. The proposed system can provide higher practicality and easy-to-use interface, as it makes real-time processing possible in various digital environment, and creates comparatively natural and realistic virtual wearing styles, and also makes semi -automatic processing possible to reduce the manual works to a minimum. According to the proposed system, it can motivate the creative activity of the designers with simulation results on the effect of textile pattern design on the appearance of clothes without manufacturing physical clothes and, as it can help the purchasers for decision-making with them, promote B2B or B2C e-commerce.