• Journal of the Korean Society of Radiology
• /
• v.8 no.6
• /
• pp.325-332
• /
• 2014

Metallic nanoparticles have attractive properties in biomedical applications such as diagnostics and therapeutics. Cross linked dextran coated iron oxide nanoparticles (SPIONs) and silica coated gadolinium oxide nanoparticles (SPGONs) have been synthesized as a radiosensitizer in the proton beam cancer therapy. The dextran and silicaused for the protective moieties on the SPIONs and SPGONs respectively. Size distributions of synthesized nanoparticles were confirmed 3~5 nm for SPIONs and 30~100 nm for SPGONs by transmission electron microscope (TEM). Cell survival fraction measurement and Western blot assay were performed to evaluate the radiosensitization effects of synthesized radiosensitizer. The calculated radiosensitization of SPIONs and SPGONs at 90 % cell death from the measured cell survival curves were 1.23 and 1.03 respectively. Western blotting results also show the same consistent results that the amount of released cytochrome c from mitochondria was considerably increased for the cancer cells taken up SPIONs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.346.1-346.1
• /
• 2016

본 연구에서는 열처리(Thermal Dewetting Process)와 빗각 증착(Oblique angle deposition)을 이용하여 비주기 서브파장 구조물을 마이크로 렌즈 형태의 유리 기판 상부에 제작하였다. 먼저 $2{\times}2cm2$ 크기의 유리 기판에 기존 리소그래피 공정으로 원기둥 형태의 감광액을 형성한다. 이후 Hot-plate로 $180^{\circ}C$에서 90초간 열을 가해 지름이 $20{\mu}m$인 반구형태로 변형시킨 뒤 반응성이온식각 공정을 진행하여 마이크로 렌즈를 제작한다. 렌즈의 표면에 나방 눈 구조를 형성하기 위해 전자빔 증착으로 15nm의 은 박막을 쌓은 뒤 $500^{\circ}C$에서 1분간 열처리 공정을 진행하였다. 열이 가해졌을 때 은 박막은 표면자유에너지를 최소화하기 위해 나노 크기의 덩어리진 입자 형태로 변화한다. 여기서 형성되는 나노입자의 크기가 렌즈 표면 중심에서 가장자리로 갈수록 작아진다는 것을 주사전자현미경을 통해 확인하였다. 증착 각도가 증가할수록 열처리 공정 후의 은 나노입자의 크기가 점점 작아진다는 것을 검증하기 위해 은 박막의 증착 각도를 $0^{\circ}$, $35^{\circ}$, $55^{\circ}$, $70^{\circ}$로 증착 후 열처리 공정을 진행하여 확인하였다. 비스듬하게 증착되어 형성된 박막은 다공형태로 낮은 밀도를 가지는데 이는 박막 두께 감소를 일으킨다. 따라서 증착 각도가 증가할수록 열처리 공정 후의 은 나노입자의 크기는 점점 작아진다. 이후 은 나노입자를 마스크로 하여 다시 반응성이온식각 공정을 진행하였으며 식각 후 나머지 은 나노입자들은 HNO3용액에서 1분간 처리하여 제거하였다. 제작된 구조물의 평균 직경과 크기는 각각 ~220nm 및 ~250nm인 것으로 확인하였다. 위와 같은 공정을 통해 다양한 크기를 가진 비주기 서브파장 구조물을 제작할 수 있다. 구조물의 주기가 파장 길이보다 짧을 경우 분산이 최소화되며 넓은 파장 대역에서 무반사 효과를 얻을 수 있다. 이 공정은 마스크를 통한 리소그래피의 한계를 극복할 수 있으며 여러 곡면형 표면에 적용가능한 장점이 있다. 또한 프리즘, 렌즈, 광섬유와 같은 광소자의 광투과율을 향상시키는데 이용될 수 있다.

• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.477-483
• /
• 2016

The effect of dose enhancement was evaluated using Snyder head phantom, dependence on size of gold nanoparticle and material concentration in megavoltage X, ${\gamma}$-ray. Monte Carlo simulation using MCNPX was used for 4, 6, 10, 15 MV and Co-60 ${\gamma}$-ray. Described the tumor in Snyder head phantom, gold nanoparticle of 25, 75, 125nm diameter was inserted inside tumor. Concentration of dose enhancement material was used for 5, 15, 25 mg/g and dose enhancement factor was calculated on the basis of the no dose enhancement material. The lower incident energy and the higher concentration of material were that high dose enhancement factor is indicated. The size of gold nanoparticle had relatively high dependence on lower incident energy and higher concentration of material. It will increase dose inside the tumor, and be additional effect of use of gold nanoparticles in radiation therapy.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.370-376
• /
• 2012

We fabricated linear low density polyethylene (LLDPE) particles via crystallization from decalin solution. In the thermally induced phase separation (TIPS) process, formation of particles occurred during controlled cooling of LLDPE/decalin solution. Despite an increase of nucleation and growth rate for crystals at higher polymer concentrations, which generally results in larger particles than at lower concentration, the average diameter of LLDPE particles increased as LLDPE was more concentrated in decalin solution. In the FE-SEM micrographs, the observed particles from various concentrations were smaller than 10 ${\mu}m$, showing spherical morphologies. In addition to its effect on size, concentration of LLDPE had an broadening effect on the particle size distribution.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.355-361
• /
• 2009

Effects of operating variables on solid separation rate in two-interconnected fluidized beds system for selective solid circulation have been investigated. Coarse(212~300 or $425{\sim}600{\mu}m$) and fine($63{\sim}106{\mu}m$) particles were separated using the solid separator and the solid separation rate was ranged from 66 to 987 g/min. The solid separation rate increased as the gas velocity through the solid injection nozzle, solid height, diameter of solid injection nozzle, particle size of coarse particles, aperture of the solid separator, and weight fraction of fines in the solid mixture increased. However, the effect of the fluidization velocity was negligible.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.301-301
• /
• 2011

최근 고밀도 메모리 반도체의 재료와 빠른 응답을 요구하는 나노입자를 이용한 비휘발성 메모리 소자의 제작에 대한 연구가 활발히 진행되고 있다. 그에 따른 기존의 플래쉬 메모리가 가지는 문제점을 개선하기 위해서 균일하고 규칙적으로 분포하는 새로운 나노소재의 개발과 비휘발성, 고속 동작, 고집적도, 저전력 소자의 공정기술이 요구되고 있다. 또한 부유게이트에 축적되는 저장되는 전하량을 증가시키기 위한 새로운 소자구조 개발이 필요하다. 한편, 실리 사이드 계열의 나노입자는 금속 나노입자와 달리 현 실리콘 기반의 반도체 공정에서 장점을 가지고 있다. 따라서 본 연구에서는 화합물 중에서 비휘발성 메모리 장치의 전기적 특성을 향상 시킬 수 있는 실리사이드 계열의 바나듐 실리사이드(V3Si) 박막을 열처리 과정을 통하여 수 nm 크기의 나노입자로 제작하였다. 소자의 제작은 p-Si기판에 실리콘산화막 터널층(5 nm 두께)을 건식 산화법으로 성장 후, 바나듐 실리사이드 금속박막을 RF 마그네트론 스퍼터 시스템을 이용하여 4~6 nm 두께로 터널 베리어 위에 증착하고, 그 위에 초고진공 마그네트론 스퍼터링을 이용하여 SiO2 컨트롤 산화막층 (20 nm)을 형성시켰다. 여기서 V3Si 나노입자 형성을 위해 급속 열처리법으로 질소 분위기에서 800$^{\circ}C$로 5초 동안 열처리하여 하였으며, 마지막으로 열 기화 시스템을 통하여 알루미늄 전극(직경 200 ${\mu}m$, 두께 200 nm)을 증착하여 소자를 제작하였다. 제작된 구조는 금속 산화막 반도체구조를 가지는 나노 부유게이트 커패시터이며, 제작된 시편은 투사전자현미경을 이용하여 나노입자의 크기와 균일성을 확인했다. 소자의 전기적인 측정을 E4980A capacitor parameter analyzer와 Agilent 81104A pulse pattern generator system을 이용한 전기용량-전압 측정을 통해 전하저장 효과 및 메모리 동작 특성들을 분석하고, 열처리 조건에 따라 형성되는 V3Si 의 조성을 엑스선 광전자 분광법을 이용하여 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.9-15
• /
• 2022

In order to overcome the limitation of conventional nanoparticle dispersion methods such as sonicator or homogenizer, a filtration method using an ultrasonic atomization effect and cyclones was proposed in this study. A 0.5 wt% suspension was made with Al₂O₃ powder with an average diameter of 250 nm. The suspension was filtered by the proposed method after pre-dispersing using a sonicator and a homogenizer, respectively. As the result, in the case of the suspension after pre-dispersing with a sonicator, the particle size distribution of the filtered suspension started showing up a single normal distribution indicating the mode of the average diameter only after the 3rd cyclone process. On the other hand, in the case of the suspension with the homogenizer pre-dispersion, similar results appeared from the 2nd cyclone process. Filtration of various types of nanoparticles is expected to be possible by adjusting ultrasonic atomization frequency and manipulating the design of the cyclone.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1881-1891
• /
• 2000

Cenosphere particles of different fly ash formed at the pulverized coal power plant were hollow sphere or filled with small particles inside solid particles. And size was relatively larger than other fly ash particles as well as specific gravity was small to suspend in the water. In this paper, it was demonstrated to contain a variety of morphological particle type, and the physical and chemical properties related to the cenosphere and fly ash particles. Furthermore it was estimated the possibility to reuse the cenosphere particles on the base of cenosphere properties. Cenosphere formation resulted from melting of mineral inclusion in coal, and then gas generation inside the molten droplet. As the aluminosilicate particle was progressively heated, a molten surface layer developed around the solid core. Further heating leaded to cause the formation of fine particles at the core. The mass median diameter(MMD) of cenosphere particles was $123.11{\mu}m$ and the range of size distribution was $100{\sim}200{\mu}m$ with single modal. It was represented that specific density was $0.67g/cm^3$ fineness was $1135g/cm^3$. The chemical components of cenosphere were similar to other fly ash including $SiO_2$, $Al_2O_3$, but the amount of the chemical component was different respectively. In the case of fly ash, $SiO_2$ concentration was 54.75%, and $Al_2O_3$ concentration was 21.96%, so this two components was found in 76.71% of the total concentration. But in the case of cenosphere, it was represented that $SiO_2$ concentration was 59.17% and $Al_2O_3$ concentration was 30.16%, so this two components was found in 89.33% of the total concentration. Glassy component formed by the aluminosilicate was high in the cenosphere, so that it was suitable to use insulating heat material.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.141-149
• /
• 2014

In the present study, pure RHO zeolite was hydrothermally synthesized by using 18-crown-6 ether as a structure directing agent(SDA), and the small gases adsorption was investigated. Synthesized RHO zeolite was a cube shape particle of which average edge length was around $1.2{\mu}m$ and composed of primary crystallites having a diameter of around 100 to 200 nm. RHO zeolite structure was stable under 3h calcination at $600^{\circ}C$. Water adsorption data announced that RHO zeolite has a specific surface area of 483.32 m2/g and its micropore diameter was about 4 A. Gas adsorption was studied in the pressure range of 50 to 500 kPa for $CO_2$, $N_2$, $O_2$ and $H_2$. It was evident that RHO zeolite showed a strong $CO_2$ adsorption behavior. Especially, RHO zeolite showed a transient $CO_2$ adsorption behavior. The 3h $CO_2$ up-take at 50 kPa and 500 kPa was 1.283 and 3.357 mmol/g, respectively. The $CO_2/H_2$ selectivity was around 16 at 500 kPa. Compared with gas adsorption data for some representative microporous adsorbents, it was certain that RHO zeolite is a beneficial adsorbent for $CO_2/H_2$ separation.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.11
• /
• pp.25-37
• /
• 2014

Clay or sand does not exist alone but various sizes of soil are mixed in the field. In this study, the effect of water content on large deformation of such mixed soils is studied by using soil column tests and a particle method. A soil column with 7 cm in diameter and 13 cm in height, which was made out of kaolinite with sand content of 0, 10, 25, or 50%, was tested for large deformation. Its deformation was monitored with time. While increasing its water content from 40, 60, to 80%, a total of 12 types of soil column tests were carried out. The particle method simulated their deformation with time. A maximum plastic shear modulus, which was a function of undrained shear strength and plasticity index for soils with different water contents, was associated with soil viscosity to simulate large deformation of soil column. When a sand content of soil column was constant, the deformation of soil column increased with increasing water content. When a water content of soil column was constant, large deformation occurred with increasing the sand content. The maximum deformation, which was 22 cm in diameter, was observed in the case of water content of 80% and sand content of 50%. The particle method was able to relatively well simulate such large deformation and stress change of soils.