• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06a
• /
• pp.65-71
• /
• 1995

기계 윤활면내에 포함된 마멸입자는 기계시스템의 상태를 잘 대변하여 주므로 마멸입자의 크기분포, 단위체적당 입자수, 구성성분 및 형상 등의 정확한 규명은 기계시스템의 상태진단을 위한 여러 정보를 제공한다. 특히 마멸입자의 형상과 그 크기는 미시적 파괴현상인 마멸과정의 기구를 반영해 주고 있으며, 또한 마멸입자의 표면은 그것이 마찰면 혹은 파단면의 미시적인 형상과 반응 생성물을 포함하고 있는 표본이 된다. 본 연구에서는 마멸분의 형상, 크기, 표면광택 등과 그것이 발생하는 작동조건과의 관계를 인공 신경회로망 해석을 이용하여 기계 윤활면의 마멸분 형태인식에 적용하는 것을 목적으로 하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.3
• /
• pp.293-299
• /
• 2011

To study the flow characteristics of water-based $Al_2O_3$ nanofluids according to the shape of the nanoparticles, we measure the pressure drop in a fully developed laminar flow regime. Water-based $Al_2O_3$ nanofluids of 0.3 Vol.% with sphere-, rod-, platelet-, and brick-shaped nanoparticles are manufactured by the two-step method. Zeta potential is measured to examine the suspension and dispersion characteristics, and TEM image is considered to confirm the shape characteristics of the nanoparticles. The experimental results show that the pressure drop of $Al_2O_3$ nanofluids depends on the shape of the nanoparticles although the nanofluids has same volume fraction of nanoparticles. This is explained by the surface area per unit mass of the nanoparticles and the size of the nanoparticles suspended in the base fluids.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.149-149
• /
• 2013

반도체 공정 및 디스플레이 공정에서 발생하는 오염입자는 공정 불량을 일으키는 가장 큰 인 중의 하나이며, 수십 나노에서 수 백 나노의 크기를 갖는다. 최근 반도체 산업이 발전함에 따라 회로의 선폭이 점차 감소하고 있으며 오염입자의 임계 직경(critical diameter) 또한 작아지고 있다. 또한 디스플레이 산업에서는 패널이 대형화되고 공정이 발달함에 따라 입자에 의한 패널 오염이 이슈가 되고 있는 실정이다. 현재 반도체 및 디스플레이 산업에서 사용되는 측정방법으로는 레이저를 이용하여 공정 후 표면에 남아있는 오염입자를 측정하는 ex-situ 방법이 주를 이루고 있다. Ex-situ 방법을 이용한 오염입자의 제어는 웨이퍼 전체를 측정할 수 없을 뿐만 아니라 실시간 측정이 불가능하기 때문에 공정 모니터링 장비로 사용이 어려우며 오염입자와 공정 간의 상관관계 파악에도 많은 제약이 따르게 된다. 이에 따라 저압에서 in-situ 방법을 이용한 실시간 오염입자 측정 기술 개발이 요구되고 있다. 또한 입자의 크기 뿐 아니라 성분과 형상까지 측정할 수 있는 장치의 개발 요구가 높아지고 있는 실정이다. 이를 위해 입자의 크기 및 분포를 측정할 수 있는 Particle Beam Mass Spectrometer (PBMS)와 형상을 측정할 수 있는 Scanning Electron Microscope (SEM)의 기능을 통합하여 실시간으로 나노입자의 복합특성(크기, 성분, 형상)을 측정할 수 있는 장치를 개발하였다. 또한 기존 장치들의 문제점 중 하나가 실시간으로 교정이 불가능하다는 것이었는데 이 장치의 경우 실시간으로 측정되는 결과의 조합으로 실시간 교정까지도 가능한 장점을 가지고 있다.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.10
• /
• pp.41-53
• /
• 2009

In order to analyze the influence of particle shape on evolution of particle crushing and characteristic of shear behavior of granular soil, direct shear test was simulated by using DEM (Discrete Element Method). Six particle shapes were generated by clump and cluster model built in PFC (Particle Flow Code). The results of direct shear test for six particle shapes were compared and analyzed with those for circular particle shape. The results of numerical tests showed a good agreement with those of experimental tests, thus the appropriateness of numerical modelling set in this study was proved. As for particle shape, more angular and rougher particle induced larger internal friction angle and more particle crushing than relatively round and smooth particle. When particles were crushed, crushing was concentrated on the shear band adjacent to the shear plane. Finally, it can be concluded that the numerical models suggested in this study can be used extensively for other studies concerning the shear behavior of granular soil including soil crushing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.641-646
• /
• 2016

Soot particles generated by fossil fuel combustion normally have fractal morphology with aggregates consisting of small spherical particles. Thus, Rayleigh or Mie elastic light scattering theory is not feasible for determining the fractal properties of soot aggregates. This paper describes a detailed process for applying Rayleigh-Debye Gans (RDG) scattering theory to effectively extract the morphological properties of any nano-scale particles. The fractal geometry of soot aggregates produced from an isooctane diffusion flame was observed using ex situ transmission electron microscopy (TEM) after thermophoretic sampling. RDG scattering theory was then used to analyze their fractal morphology, and various properties were calculated, such as the diameter of individual soot particles, number density, and volume fraction. The results show indiscernible changes during the soot growth process, but a distinct decreasing trend was observed in the soot oxidation process. The fractal dimension of the soot aggregates was determined to be around 1.82, which is in good agreement with that produced for other types of fuel. Thus, it can be concluded that the value of the fractal dimension is independent of the fuel type.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.230-230
• /
• 2003

Chalcopyrite 구조를 가진 CuInSe$_2$ (CIS) 나노입자를 유기용매인 diethylamine을 사용하여 autoclave안에서 용매열법(solvothermal method)으로 제조하였다. 180 $^{\circ}C$에서 36시간 반응시켜 길이가 10-30 nm, 폭이 5-10 nm인 rod-Eke 형상을 한 CIS 나노입자를 얻었다. 반응온도를 25$0^{\circ}C$로 증가시키고 동일한 반응시간에서 보다 미세하고 균일한 구형의 CIS 나노입자를 관찰할 수 있었다. 한편, 190 $^{\circ}C$에서 얻어진 CIS 나노입자는 36시간을 반응시킨 경우 구형으로 관찰되었으나 60시간 반응시킨 경우는 길이가 50-100 nm 인 rod-like 입자로 성장하였다. 이와 같이 반응시간과 온도를 달리하여 나노입자의 형상이 바뀌는 것을 입자성장기구의 관점에서 고찰하였다. 반응시간과 온도에 따라 얻어진 CIS 나노 입자들의 결정성, 미세구조 그리고 정량 및 정성분석을 XRD, SEM, TEM, EDS등으로 각각 행하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.3
• /
• pp.21-26
• /
• 2016

Soil particle shape analysis was conducted with sands from Jumujun, Korea and Ras Al Khair, Saudi Arabia. Two hundred times enlarged digital images of the particles of those two sands were obtained with an optical microscope. The resolution of the digital images was $640{\times}320$. By conducting digital image processing, the coordinates of the soil particle boundary were extracted. After mapping those coordinates to the complex space, Fourier transformation was performed and the coefficients of each trigonometry term were computed. The coefficients reflect the shape characteristics of the sand grains and are invariant to translation. To evaluate the shape itself excluding the size of the soil particle, the coefficient was normalized by the equivalent radius of soil particle; this is called Fourier descriptor. After analyzing the Fourier descriptors, it was found that the major characteristics of Jumunjin and Ras Al Khair sands were elongation and asymmetry. Furthermore, it was found that the particle shapes reflect the self-similar, fractal nature of the textural features. The effects of resolution on soil particle shape analysis was also studied. Regarding this, it was found that the significant Fourier descriptors were not significantly affected by the image resolution investigated in this study, but the descriptors associated with textural features were affected.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.3
• /
• pp.379-386
• /
• 1985

본 연구에서는 부차적으로 이와 같은 광반사법의 유용성을 개발, 평가하고자 한다. 또 실험에서 벽면에 부착되는 입자는 기하학적 형상에 따라 입자주위의 유체 흐름에 지배적인 영향을 받게 되므로 실험을 통하여 입자의 기하학적 형상에 따라 변 화되는 열확산 효과의 상대적인 영향을 평가한다.

• Composites Research
• /
• v.27 no.3
• /
• pp.109-114
• /
• 2014

Manufacture of nancomposites has simple process for developing nanocomposites due to the increasing applications using nanofillers. This work studied nanofiller coated glass fiber for reinforcing material with good wetting and conductivity and the morphology of nanofiller coated glass fiber was analyzed by FE-SEM. The durability of reinforced glass fiber was investigated with different shapes of nanofillers using sonication rinsing method. Fatigue test was performed to evaluate the adhesion of reinforcing interface and stability of nanofiller coating layer for single fiber reinforced composites. Apparent modulus and conductivity of nanofiller coating layer were evaluated to realize multifunctional of nanocomposites. Fiber type of nanofiller was better than plate type due to better cohesion between fiber and nanofillers. At last, the stability of fiber type nanofiller of coating layer has better durability and conductivity than plate type case.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.329-334
• /
• 2002

The $CaTio_3$powder with perovskite structure was synthesized by mixing anatase $TiO_2$and $Ca(OH)_2$powders as starting materials, and KOH or NaOH as mineralizer, followed by hydrothermal method. The change of crystal structure, particle shape and size of the synthesized $CaTiO_3$powder was investigated with kind and concentration of mineralizer. It was found that the spherical particles of 0.7 $\mu$m were obtained when using 1N KOH and the hexahedrons particles of 3$\mu$m were obtained for the case of using 10 N KOH. With increasing KOH concentration, the particle shape was changed from sphere to hexahedrons and its size also increased. When using 1 N NaOH, the powder was consisted of 0.5~1 $\mu$m particle in size, whereas hexahedrons of 1~4 $\mu$m and whiskers more than 10$\mu$m in size was obtained for the 10 N NaOH solution. With increasing NaOH concentration, the particle shape was varied from hexahedrons to whiskers, showing the similar result with the KOH case. It was confirmed from EDS analysis that Na element, which was detected in hexahedrones was not contained in the whiskers.