The objectives of this investigation were to obtain an excellent spray by cavitation under the low injection pressure. When cavitation occurs in the nozzle hole, the atomization of the liquid jet enhanced considerably. In this experiments, a acrylic nozzle made the gap and installed the bypass in the nozzle hole was used to enhance the atomization of the liquid jet at the low injection pressure. The liquid flow in the nozzle hole was photographed by a transmitted light using a micro flash. The spray angle was measured macroscope images of PMAS and the Sauter mean diameter was measured PDA system. To measure the pressure of the nozzle hole, pressure transducer was used. The results of this study indicated that enhanced atomization of the liquid jet at the low injection pressure was obtained by making the gap and installing the bypass at the single hole nozzle.
왕복식엔진에서 연소과정은 실린더내 유체유동에 지배되므로 최적조건의 엔진설계를 위해서는 실린더내 유체유동을 효과적으로 이용하는 것이 필요하다. 연소과정에 중요한 영향을 미치는 압축말기 연소실내 난류강도는 흡입과정시 생성된 유동의 에너지가 압축과정을 거치면서 작은 스케일의 에디(eddy)로 깨지면서 발생된다. 연소과정시 이러한 에디들은 초기화염생성을 촉진 시키고 화염전파속도를 증진시키는 역할을 함으로써 실린더내 유체유동에 대한 이해증진을위해 실린더내 평균속도 및 난류유동을 측정하는 연구들이 많이 진행되고 있다. 엔진유동은 매사이 클의 유동이 엄밀히 주기적인 운동을 하지 않고, 각 사이클의 유동이 비정상유동을 하며, 유동의 생성 및 소멸이 매우 짧은 특성을 가진다. 따라서 산란입자가 측정체적을 통과할 때 속도데이 터가 발생하는 LDV(laser Doppler velocimetry) 측정에 있어서 레이저빔의 산란광노이즈 감소와 산란입자의 효율적인 공급으로 데이터 발생률을 높이는 것이 어려운 점이다. 이 글에서는 엔진 유동의 LDV측정시 고려해야 할 문제점들, 실험장치구성, 그리고 데이터처리 방법과 주요측정 결과에 대해 본 연구팀에서 지금까지 수행한 연구결과를 토대로 하여 기술하고자 한다.
The present study investigated dynamically and thermally interacting droplets in a closely spaced tandem array. By measuring the velocity and diameter of the droplet traveling along the isothermal vertical plate drag coefficients and vaporization rates of droplets at certain location were obtained. During the experiment initial droplet spacings were less than 5, and initial droplet diameters were ranged between 280 .mu.m and 700 .mu.m Drag coefficients on closely spaced droplets were placed far below the standard drag coefficient, for which it was caused turbulence induced from aforelocating droplets also narrow spaces among droplets restricted heat transfer to droplets from hot gas flow. In addition evaporated vapor entrapted between droplets was major factor in delaying droplet vaporization. With the experimental results the drag coefficient was correlated with respect to Reynolds number for the droplet as follows : $c_{D}$ =2.4/Red.$^{0.37}$
When conducting a powder blasting to a spinning cylindrical workpiece in the codition of 0.76~1.5(mm) in nozzle size, 1~5(atm) in working pressure, and 40~100(mm) in stand off distance, the value of surface roughness becomes under $0.283{\mu}m$, which is not enough to expand a bonding area. In the case of horizontal transfer blasting with 0.76mm of nozzle size, 100mm of stand off distance, and 2~5atm of working pressure, $0.5{\sim}0.7{\mu}m$ of surface roughness has achieved regardless of feed rate.
본 발표에서는 OLED, LCD, E-ink 등에 적용되는 고품질 전도성 투명 산화막의 구조, 전기적 성질, 광학적 성질, 표면 거칠기 등에 미치는 공정 변수의 영향을 유연 기판 적용 사례를 들어서 설명한다. 특히 RF superimposed dc sputtering 방법으로 성장시킨 TCO의 특성이 현재 알려진 어떤 방법보다도 우수한 특성들과 유연 기판에 필수적인 내절성을 갖는 결과를 보여주고 있음에 주목하고 그 원리 및 대형화 가능성에 대해서 언급한다. 증착된 박막의 투습성 평가에서 측정 장비의 한계치 이하를 달성하였고 플라즈마를 이용한 중간 처리 과정의 효과로 PC, PET 등의 필름 기판에서도 우수한 성질을 갖는 박막의 성공적인 증착이 이루어 졌음을 설명한다. 여기에는 적절한 산소 분압의 유지가 관건이며 이미 재료연구소에서는 대형 타겟 시스템에 대해서 안정된 공정을 운영하고 있다. RF superimposed dc power의 특징은 타겟에서 반사되는 고속 중성 입자의 유속을 적절하게 제어할 수 있다는 점으로 판단되며 이는 주로 산소 원자와 산소 음이온의 에너지가 높다는 점에 주목할 필요가 있다. Carcia등의 보고에 따르면 산소 음이온의 경우에는 110 eV가 넘는 운동 에너지를 가지고 성장 중인 박막에 입사하여 결함을 생성한다고 한다. 이들 고속 입자들의 에너지를 낮추고 그 수를 감소시킬 수 있는 방법 중의 하나가 RF superimposed dc라고 판단된다.
The objective of this investigation was to obtain an excellent spray at the low injection pressure. When cavitation occurred in the nozzle hole the atomization of the liquid jet enhanced considerably. In this experiments, a acrylic nozzle which was installed the gap and installed the bypass in the nozzle hole was used to enhance the atomization of the liquid jet at the few injection pressure. The liquid flow in the nozzle hole was photographed by a transmitted light using a micro flash. The spray angle was measured by macroscope images of PMAS and the Sauter mean diameter was measured by PDA system. The pressure of the notate hole was measured by pressure transducer. It was found that enhanced atomization of the liquid jet at the low injection pressure was obtained by installing the gap and the bypass at the single hole nozzle.
중성입자빔 입사장치(neutral beam injection, NBI)의 중성빔 에너지 효율은 이온원의 수소 이온밀도 분율이 결정한다. 이온원에서 만들어진 $H^+$, $H_2^+$ 그리고 ${H_3}^+$는 중성화 과정(neutralization) 중 해리(dissociation) 때문에 각각 입사 에너지의 1, 1/2 그리고 1/3을 가진 중성입자가 된다. 중성빔 에너지 효율 제고하기 위해서는 이온원의 전체 이온 중 단원자 수소 이온 밀도 증가가 필요하다. 유도결합형 수소 플라즈마 이온원에서 RF 안테나 주파수에 따른 플라즈마 밀도와 단원자 수소 이온 밀도 비율 변화를 관찰하였다. RF 플라즈마에서 가스 압력이 결정하는 전자의 운동량 전달 충돌 주파수 대비 높은 RF 안테나 주파수(13.56 MHz)와 낮은 RF 안테나 주파수(수백 kHz)의 전력을 인가하였으며, Langmuir 탐침, 안테나 V-I 측정기 그리고 QMS(quadrupole mass spectrometer)을 이용하여 플라즈마 특성을 진단하였다. 플라즈마 밀도와 수소 이온 밀도 분율은 플라즈마 가열 메커니즘과 수소 플라즈마 내 반응 메커니즘에 의해 결정된다. 플라즈마 가열 메커니즘에 따른 실험 결과에 대한 RF 안테나 주파수 효과는 플라즈마 트랜스포머 회로 모델을 통해 해석하였으며, 수소 플라즈마 내 반응은 0-D 정상 상태의 입자 및 전력 평형 방정식 결과로 해석하였다.
The fuel injection type, in the gasoline engines of atomization of fuel droplet and its distribution hae influenced directly on the decision of engine performance and harmful emission. In this paper, atomization characteristics of fuel spray is investigated with microscopic visualization system. Particle motion analysis system is used to measure the SMD from fuel spray of air-assisted injector by initial factors such as temperature of ambient air and air-assisted pressure. As air-assist pressure and ambientair temperature increase, the SMD is decreased, and its variation is more stable.
Ashkin에 의해 처음으로 단일 레이저를 사용하여 미세입자를 포획한 이후로 많은 연구가 활발히 이루어지고 많은 분야에 응용이 되고 있다[1]. 포획이 되는 기본적인 원리는 일정한 파장을 가진 레이저가 물체에 부딪히게 되면 빛의 일부는 표면에서 반사가 되고 일부는 물체를 통과하면서 굴절을 하게 되는데, 이 때 굴절에 의해 발생하게 되는 운동량의 차이가 포획을 가능하게 한다. 이때 발생하는 힘은 빛의 입사되는 방향에 평행한 경우(scattering force)와 수직한 경우(gradient force)로 나눌 수 있으며, 입사되는 각에 따라 두 성분의 크기가 바뀌게 되는데 이를 이용하여 입자를 밀어내고 잡아당기는 효과를 줄 수 있다[2]. (중략)
본 논문에서는 바다와 같은 스케일이 큰 장면인 물 시뮬레이션에서 표현되는 거품 효과(Foam effects)를 노이즈 없이 디테일하게 표현할 수 있는 프레임워크를 소개한다. 거품이 생성될 위치와 거품 입자의 이류는 기존의 접근법인 스크린 투영 방법을 통해 계산한다. 이 과정에서 중요한 것이 투영맵이지만 이산화된 스크린 공간에 운동량을 투영하는 과정에서 노이즈가 발생한다. 본 논문에서는 노이즈 제거 신경망(Denoising neural network)을 활용하여 이 문제를 효율적으로 풀어낸다. 투영맵을 통해 거품이 생성될 영역이 선별되면 2D공간을 3D공간으로 역변환(Inverse transformation)하여 거품 입자를 생성한다. 결과적으로 깔끔한 거품 효과뿐만 아니라, 노이즈 제거 과정으로 인해 소실되는 거품 없이 안정적으로 거품 효과를 만들어냈다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.