• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.228-232
• /
• 2016

As the quantity of HNS sea trasport and the number of HNS accidents at sea are increasing recently, the importance of HNS management is emphasized so that we try to develop marine accident case standard code for making HNS accidents at sea databased systemically in this study. First and foremost, we draw the related requisites of essential accident reports along with internal and external decrees and established statistics of classified items for conducting study, and we referred to analogous standard codes obtained from developed countries in order to research code design. Code design is set like 'Accident occurrence ${\rightarrow}$ The initial accident information ${\rightarrow}$ Accident response ${\rightarrow}$ Accident investigation' in accordance with the general flow of marine HNS accidents of in which the accident information is input and queried. We classified initial accident information into the items of five categories and constructed "Preliminary Information Code(P.I.C.)". In addition we constructed accident response in two categories and accident investigation in three categories that get possible after the accident occurrence as called "Full Information(F.I.C.)", including the P.I.C. It is represented in 3 kinds of steps on each topic by departmentalizing the classified majority as classified middle class and classified minority. As a result of coding marine HNS accident and of the code to a typical example of marine HNS accident, HNS accident was ascertained to be represented sufficiently well. We expect that it is feasible to predict possible trouble or accident henceforward by applying code, and also consider that it is valuable to the preparedness, response and restoration in relation to HNS accidents at sea by managing systemically the data of marine HNS accidents which will occur in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.262-268
• /
• 2017

The energy consumption of buildings is approximately 20.5% of the total energy consumption, and the interest in energy efficiency and low consumption of the building is increasing. Several studies have performed energy analysis and evaluation. Energy analysis and evaluation are effective when applied in the initial design phase. In the initial design phase, however, the energy performance is evaluated using general level information, such as glazing area and surface area. Therefore, the evaluation results of the detailed design stage, which is based on the drawings, including detailed information of the materials and facilities, will be different. Thus far, most studies have reported the analysis and evaluation at the detailed design stage, where detailed information about the materials installed in the building becomes clear. Therefore, it is possible to improve the accuracy of the energy environment analysis if the energy environment information generated during the life cycle of the building can be established and accurate information can be provided in the analysis at the initial design stage using a probability / statistical method. On the other hand, historical data on energy use has not been established in Korea. Therefore, this study performed energy environment analysis to construct the energy environment historical data. As a result of the research, information classification system, information model, and service model for acquiring and providing energy environment information that can be used for building lifecycle information of buildings are presented and used as the basic data. The results can be utilized in the historical data management system so that the reliability of analysis can be improved by supplementing the input information at the initial design stage. If the historical data is stacked, it can be used as learning data in methods, such as probability / statistics or artificial intelligence for energy environment analysis in the initial design stage.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.344-350
• /
• 2003

In this paper, we propose a novel sharing method ordering the events occurring between users collaborated with the common telecomputing environment. We realize the sharing method with multimedia data to improve the coworking effect using teleprocessing network. This sharing method advances the efficiency of communicating projects such as remote education, tele-conference, and co-authoring of multimedia contents by offering conveniences of presentation, group authoring, common management, and transient event productions of the users. As for the conventional sharing white board system, all the multimedia contents segments should be authored by the exclusive program, and we cannot use any existing contents or program. Moreover we suffer from the problem that ordering error occurs in the teleprocessing operation because we do not have any line-up technology for the input ordering of commands. Therefore we develop a method of retrieving input and output events from the windows system and the message hooking technology which transmits between programs in the operating system In addition, we realize the allocation technology of the processing results for all sharing users of the distributed computing environment without any error. Our sharing technology should contribute to improve the face-to-face coworking efficiency for multimedia contents authoring, common blackboard system in the area of remote educations, and presentation display in visual conference.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.3159-3174
• /
• 1997

This paper reports a research to develop a methodology and a tool for understanding of very large and complex real-time software. The methodology and the tool mostly developed by the author are called the Architecture-based Real-time Software Understanding (ARSU) and the Software Re/reverse-engineering Environment (SRE) respectively. Due to size and complexity, it is commonly very hard to understand the software during reengineering process. However the research facilitates scalable re/reverse-engineering of such real-time software based on the architecture of the software in three-dimensional perspectives: structural, functional, and behavioral views. Firstly, the structural view reveals the overall architecture, specification (outline), and the algorithm (detail) views of the software, based on hierarchically organized parent-chi1d relationship. The basic building block of the architecture is a software Unit (SWU), generated by user-defined criteria. The architecture facilitates navigation of the software in top-down or bottom-up way. It captures the specification and algorithm views at different levels of abstraction. It also shows the functional and the behavioral information at these levels. Secondly, the functional view includes graphs of data/control flow, input/output, definition/use, variable/reference, etc. Each feature of the view contains different kind of functionality of the software. Thirdly, the behavioral view includes state diagrams, interleaved event lists, etc. This view shows the dynamic properties or the software at runtime. Beside these views, there are a number of other documents: capabilities, interfaces, comments, code, etc. One of the most powerful characteristics of this approach is the capability of abstracting and exploding these dimensional information in the architecture through navigation. These capabilities establish the foundation for scalable and modular understanding of the software. This approach allows engineers to extract reusable components from the software during reengineering process.

• Journal of The Korean Association For Science Education
• /
• v.19 no.3
• /
• pp.428-440
• /
• 1999

The colorful overhead projector films, named as Bio-cosmos II, including photographs, pictures, concept maps, and diagrams, were developed and manufactured as audio-visual teaching aids and teaching resources for students' biology learning in high school, and the CD-ROM and web sites for their application to the school were also constructed. The content of the films was organized based upon the analysis of seven different biology textbooks approved by the Ministry of Education. The films were designated based on various instructional strategies and manufactured using multimedia with various educational softwares. The CD-ROM was composed of the scenes as logo, initial main, chapters list, contents, and quit. Initial main scene indicated various chapters according to the texts of biology areas in General Science, Biology I, and II. Each chapters linked with the scenes for detailed concept maps, the downstream real subjects, and contents. The subject screens were composed of various types of summarized diagrams including lesson contents, figures, pictures, photographs, and their explanation, experimental procedures and results, tables for summarized contents, and additional animation with video captures, explanations, glossary, etc. Most files were manufactured in software Adobe Photoshop by scanning the pictures, figures and photographs, and then the explanation, modification, storing with PICT or PSD files, and transformation with JPG files, were processed in the aspect of high quality in terms of instructional strategies and graphic skills on gracefulness, clearness, colorfulness, brightness, and distinctness. A 14 films for biology areas in General Science, 80 for Biology I, and 142 for Biology II were manufactured and loaded to the CD-ROM and web site, and the files had been attempted to opened with an internet home-page of http://gic.kyungpook.ac.kr/biocosmos.

• Journal of the Korean Society of Radiology
• /
• v.7 no.6
• /
• pp.403-408
• /
• 2013

This study made a tentative estimation of the shielding rate of barium compound by thickness through monte carlo simulation to apply medical radiation shielding products that can replace existing lead. Barium sulfate($BaSO_4$) was used for the shielding material, and thickness of the shielding material specimen was simulated from 0.1 mm to 5 mm by applying $15{\times}15cm^2$ of specimen area, $4.5g/cm^3$ of density of barium sulfate, and $11.34g/cm^3$ density of lead. Entered source was simulated with 10kVp Step in consecutive X-ray energy spectrum(40 kVp ~ 120 kVp). Absorption probability in 40 kVp ~ 60 kVp showed same shielding rate with lead in 3 mm ~ 5 mm of thickness, but it was identified that under 2 mm, the shielding rate was a bit lower than the existing lead shielding material. Also, the shielding rate in 70 kVp ~ 120 kVp energy band showed similar performance as the existing lead shielding material, but it was tentatively estimated as fairly low shielding rate below 0.5 mm. This study estimated the shielding rate of barium compound as the thickness function of x-ray energy band for medical radiation through monte carlo simulation, and made comparative analysis with existing lead. Also, this study intended to verify application validity of the x-ray shielding material for medical radiation of pure barium sulfate. As a result, it was estimated that the shielding effect was 95% higher than the existing lead 1.5 mm in at least 2 mm thickness of barium compound in medical radiation energy band 70 kVp ~ 120 kVp, and this result is considered valid to be provided as a base data in weight lightening production of radiation shielding product for medical radiation.

• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.279-287
• /
• 2020

Recently, interest in radiation protection is increasing because of the occurrence of accidents related to exposure dose. So, the nuclear safety act provides to install the shields to avoid exceeding the dose limit. In particular, when the worker conducts the non-destructive testing (NDT) without the fixed shielding structure, we should monitor the access to the workplace based on a constant dose rate. However, when we apply for permits for NDT work in these work environments, the consideration factors to the estimation of the distance and exposure dose are not legally specified. Therefore, we developed the excel model that automatically calculates the distance, exposure dose, and cost if we input the factors. We applied the assumption data to this model. As a result of the application, the distance change rate was low when the thickness of the lead blanket and collimator is above 25 mm, 21.5 mm, respectively. However, we didn't consider the scattering and build-up factor. And, we assumed the shape of the lead blanket and collimator. Therefore, if we make up for these limitations and use the actual data, we expect that we can build a database on the distance and exposure dose.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.750-763
• /
• 2018

This study conducted 10 sampling sites survey 4 times to determine the trophic structure and energy flow of marine ecosystems for Uljin marine ranching area, Korean East Sea from March to October 2013. Based on the ecological characteristics of biological species, one used the non-Metric Multidimensional Scaling method based on the similarity of species. A total of 19 classified species groups formed categories including, top predators, seabirds, large pelagic fishes, small pelagic fishes, rockfishes, pleuronectiformes, benthic fishes, semi-benthic fishes, cephalopods, benthic feeders, epifauna, bivalves, abalone, Cnidaria, zooplankton, benthic algae, microalgae, phytoplankton and detritus. The biomass, production/biomass, consumption/biomass, diet composition data of each species groups to input data used in Ecopath mode estimated the trophic structure and energy flow of marine ecosystems in the Uljin marine ranching area. One estimated each species groups on the trophic level from 1 to 5.687. The sum of all consumption was estimated at $229.7t/km^2/yr$ and the sum of all exports was as estimated $3,432.4t/km^2/yr$. Total system throughput was at $6,796.2t/km^2/yr$, and the sum of all production was estimated at $3,613.1t/km^2/yr$. Net system production according to these results was estimated at $3,490.3t/km^2/yr$ and total biomass (excluding detritus) was estimated at $167.3t/km^2/yr$ in the Uljin marine ranching area.

• Journal of Korean Home Economics Education Association
• /
• v.28 no.4
• /
• pp.159-167
• /
• 2016

This study was performed to investigate the relationship between milk consumption, dietary nutrient intake, and physical strength in Korean adolescents for dietary education of home economics subject at middle and high schools. Intake of milk and milk products, that of dietary nutrients, and physical strength records were surveyed for 298 high school students resided in small and medium-sized cities in Korea. Intake of milk and milk products was collected from three-day dietary survey, and daily dairy equivalent of calcium was calculated by dividing daily calcium intake(mg) from milk and milk products by calcium content(200 mg) of 200 mL milk. Dietary survey was performed during three days including two-weekdays and one-weekend by food record method. Dietary nutrient intake was analyzed by CAN-Pro 3.0. Physical strength records were offered from subjects' schools. Subjects were divided into low intake group(${\leq}0.29/d$), medium intake group(0.30-0.78/d) and high intake group(0.79-5.66/d) according to daily mean dairy equivalent of calcium taken by them, and most of them consumed milk and milk products less than '2' of the recommended value. Daily mean dairy equivalent of calcium was significantly related with high records of '50 m running' and 'stand long jump'(p<0.05), however it was not related with other records of physical strength. Intakes of energy, carbohydrate, protein, fat, calcium, phosphorus, iron, zinc, thiamin, riboflavin, niacin and vitamin E were significantly correlated with high record of '50 m running'(p<0.01). Intakes of nutrients were related with '50 m running' except fat were significantly correlated with high record of 'stand long jump'(p<0.05). Intakes of protein, phosphorus, iron, zinc, vitamin A, $B_6$ and E were significantly correlated with high record of 'long distance running'(p<0.05). In conclusion intake of milk and milk products was related with physical strength records('50 m running' and 'stand long jump') and intakes of most nutrients including energy nutrient, vitamin and mineral were correlated with physical strength records('50 m running', 'stand long jump' and 'long distance running') in Korean adolescents. Therefore, optimal consumption of milk and various nutrients for balanced nutrition during adolescents should be emphasized in dietary education of home economics subject for their strong physical strength.

• Neonatal Medicine
• /
• v.18 no.1
• /
• pp.137-142
• /
• 2011

Purpose: In relation to perinatal healthcare, medical institutions and resources are limitative and also are in a state of flux due to the therapeutic specialty. We analyzed requests for interhospital transfers received by Busan 1339 Emergency Medical Information Center (EMIC) to grasp the state of perinatal healthcare delivery system. Methods: This study was conducted on the basis of data inputted into the computing system of Busan 1339 EMIC, between January 1 and December 31, 2009. In connection with 378 pregnant women and 136 newborns who were required to transfer, retrospective analyses were made of the success rate of transfer (SR), the number of contacted hospitals, the time required for transfer and the reason of transfer and refusal. Results: In the case of pregnant women, the SR were 65.5%. They came in contact with 2.7 hospitals, and it took 24.4 minutes. As for the reason of transfer, preterm labor accounted for the highest proportion. In the case of newborns, the SR were 71.3%. They came in contact with 2.4 hospitals, and it took 15.6 minutes. The most common reason of transfer were respiratory symptoms. In the reason of refusal with pregnant women and newborn, the lack of medical staff, medical equipments and wards accounted for great. Conclusion: Many pregnant women and newborns have been transferred to hospitals by EMIC, but the SR has not been higher yet. Accordingly, there is a need to evaluate the propriety of perinatal treatment system, as well as to set up effective perinatal healthcare delivery system.