• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.186-189
• /
• 2000

In this paper, we have designed a bandpass filter to apply the downconverter of the K-band Mu-hung-hwa satellite. To pass only the 25-30% of the bandwidth at the center frequency of 19.6GHz, we have designed a six-order interdigital bandpass filter using microstrip lines. Simulation result of optimization show that insertion loss is -0.275dB and reflection coefficient is -20.95dB at the passband frequency. measurement is determined center frequency, 19.150Hz, insertion loss, -4.1dB, input reflection coefficient. -l5dB and output reflection coefficient -l6dB.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1998.10a
• /
• pp.861-866
• /
• 1998

본 논문은 프로우브 급전한 주기적인 위상 배열 마이크로스트립 안테나의 계산된 결과를 제시한다. 수치적인 마들은 엄밀한 그린 함수와 캘러킨 (Galerkin)해에 근거를 둔다. 임의의면(plane)에서의 입력 임피던스를 스캔 각도에 따라 계산하여 반사계수를 구하고 유전체의 유전율과 두께가 위상 배열 안테나에 미치는 영향을 제시한다. 표면파에 의한 스캔 블라인드 현상을 설명하고 유전체의 두께에 따른 E-면과 H-면에서의 입력 임피던스 대역폭을 계산한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.6
• /
• pp.38-43
• /
• 1974

A design problem is studied for a nonuniform transmission line (NUTL) section to be inserted between an arbitrary source impedance and an arbitary load impedance for the purpose of impedance matching or providing a minimum input reflection coefficient over a frequency ranee as wide as possible. A special class of NUTL's, yet comprehensive enough to include almost all smoothly varying lines, are considered. Power series expansions of the ABCD parameters of such lines are used in the calculation of the input reflection coefficient. The design problem is formulated as a nonlinear programming problem withnonlinear constraints and is solved by a combined use of the sequential unconstrained minimization technique and tile Fletcher-Powell method. As a result, a line section was obtained which shows a marked improvement over any one hitherto published as a wide-band impedance matching device.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.65-68
• /
• 2001

현재 음성인식기는 다채널의 음성입력방식을 사용하고 있는 추세이다. 이런 방법으로 음성인식기를 사용할 때에 자동적으로 음성을 검출하는 음성입력방식은 발성자와 마이크간의 거리에 따라 발성음성, 반사음성과 잡음이 입력된 경우에 원 음성의 고차포만트 성분에 왜곡이 발생하게 된다 이러한 문제점을 개선하기 위하여 본 논문에서는 고주파영역의 특성을 강조시킬 수 있는 프리엠퍼시스를 이용하여 더욱 더 정확한 음성입력 방법을 제안한다. 제안한 방법은 원음과 유사한 합성입력음을 얻었고, 또한 기존의 시간영역 법 보다 더 높은 SNR을 얻을 수 있다는 것을 알 수가 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.9
• /
• pp.560-562
• /
• 2014

Broadband power divider operating over the frequency band assigned for all domestic mobile communications is designed and implemented. The implemented power divider with 20Watts power rating has the maximum insertion loss of 3.49dB, input reflection coefficient of below -18.48dB and output reflection coefficient of below -20.2dB, above 24.7dB isolation and -141.2dBc of 3rd PIMD over the operating frequency of 810 ~ 2620MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.6
• /
• pp.43-50
• /
• 2010

In this paper, we analyzed radiated emission generated by the split power/ground plane structures in order to reduce EMI in system modules. The magnetic fields and electric fields were simulated and measured on the test boards under various conditions. In order to reduce radiated emission, we have to determine spacing and location of the split ground gap so that input signal frequency does not coincide with the resonance frequency of the split power/ground plane structure and the phase of reflection coefficient is close to $0^{\circ}$ at input signal frequency. Moreover, we found that inserting a stitching capacitor could reduce the radiated emission. Low magnitude of reflection coefficient and the phase close to $0^{\circ}$ are required to reduce radiated emission. It is necessary to properly decide value and location of a stitching capacitor to fulfil those requirements.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.866-878
• /
• 1999

In this paper, stripline circulator including a ferrite resonator which is consisted of a circular disk and two annuli disks is designed and fabricated. Using RGF(Recursive Green Function) technique, electromagnetic field of port and input impedance is presented. The circulator characteristics are compared according to the ferrite arrangement, bias field intensity and port width. The pass-band frequency of the fabricated circulator using the designed data is from 1.55 GHz to 2.95 GHz, the reflection coefficient $S_{11}$ of input port is -30 dB, and the transmission coefficient $S_{21}$ between input port and isolation port is -28 dB at resonating point 2.38 GHz.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.377-380
• /
• 2006

본 논문에서는 USPCS 기지국 송신밴드 (주파수 대역 $1.93\;Ghz^{\sim}1.99\;Ghz$)에 만족하는 소형이면서도 대역폭이 넓은 슬롯 삼각형 패치 안테나를 설계 및 제작하였다. 각각의 슬롯의 길이와 폭을 변화시켰을 때의 입력반사계수의 특성을 고찰하였고, 슬롯이 있을 때와 없을 때의 패치 안테나의 크기를 비교하였다. 그 결과 슬롯에 의해 크기를 줄일 수 있을 뿐만 아니라 대역폭도 넓힐 수 있음을 확인하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.410-415
• /
• 2013

Acoustic target strength (TS) is one of the most considerable design elements for survival capacities of the submarine. It needs to reduce acoustic TS that submarines are getting larger and larger, Alberich anechoic coatings are widely used as the representative method. In this paper, the finite element method (FEM) is used to analyze the reflection and transmission coefficients of Alberich anechoic coatings, which have periodic unit cells. The FEM results are compared with experimental results in the literature. Moreover, acoustic TS for the submarine is analyzed by using that result. Finally, it is shown that acoustic TS (Case 1: 10dB, Case 2: 6dB) are reduced due to the use of Alberich anechoic coatings.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.693-695
• /
• 2015

The design and implementation of a broadband and linear HPA for TVWS are presented in this paper. The spectrum mask and transmitted power of HPAs for TVWS must be controlled and meet the regulations to minimize interference effects on the present broadcasting systems. The implemented HPA has the operating frequency of 470 ~ 698MHz with the maximum 48.63dB and minimum 43.45dB gain, input reflection coefficient of below -21.32dB, output reflection coefficient of below -4.29dB and the linearity of -45.24dBc at 28.79dBm output power.