• Title/Summary/Keyword: 입력리플전류

Search Result 100, Processing Time 0.035 seconds

Input Current Ripple Reduction Algotithm for Interleaved DC-DC Converters (다상 DC-DC 컨버터의 입력 전류 리플 저감 제어 알고리즘)

  • Joo, Dong-Myoung;Kim, Dong-Hee;Lee, Byoung-Kuk
    • Proceedings of the KIPE Conference
    • /
    • 2013.07a
    • /
    • pp.407-408
    • /
    • 2013
  • 본 논문은 주파수 제어를 통한 인터리브드 DC-DC 컨버터의 입력 전류 리플 최소화 알고리즘을 제안한다. 제안하는 알고리즘은 시스템을 전류 불연속 모드에서 0.33 또는 0.67의 고정 듀티로 제어하여 입력전류 리플을 저감한다. 제안한 알고리즘을 3상 부스트 컨버터에 적용하고 그 타당성을 실험 및 시뮬레이션을 통해 검증한다.

  • PDF

Bridgeless Sepic Converter with Ripple-Free Input Current (입력 전류 리플이 없는 브릿지리스 세픽 컨버터)

  • Yang, Jae-Won;Do, Hyun-Lark
    • Proceedings of the KIPE Conference
    • /
    • 2012.07a
    • /
    • pp.389-390
    • /
    • 2012
  • 본 논문은 입력전류 리플이 없는 브릿지리스 세픽 컨버터를 제안한다. 제안된 컨버터는 브릿지 다이오드를 제거하여 도통손실을 줄이고 결합 인덕터와 보조 캐패시터를 사용하여 입력 전류 리플을 제거하였다. 제안된 회로의 동작원리를 설명하고, 시뮬레이션으로 확인한 후 130[W]급 하드웨어 프로토 타입을 이용하여 검증하였다.

  • PDF

Control Algorithm for Multi-phase Boost Converter with High Efficiency and Low Input Ripple Current (고효율 획득 및 입력전류 리플 저감을 위한 다상 부스트 컨버터의 제어 알고리즘)

  • Joo, Dong-Myoung;Kim, Dong-Hee;Kim, Min-Kuk;Lee, Byoung-Kuk
    • Proceedings of the KIPE Conference
    • /
    • 2012.11a
    • /
    • pp.81-82
    • /
    • 2012
  • 본 논문은 고효율 획득 및 입력전류 리플 저감을 위한 3상 부스트 컨버터의 동작 알고리즘을 제안한다. 입력전압별로 인덕터 전류에 따른 투자율 감소를 고려하여 DCM 및 BCM 동작시의 효율과 입력 전류 리플을 수식적으로 분석한다. 이에 따라 3상 부스트 컨버터를 경계 도통 모드+불연속 도통 모드의 혼합 모드에서 동작시키고 타당성을 실험을 통해 검증한다.

  • PDF

Input Current Ripple Improvement on Interleaved Boost Power Factor Corrector Operating in Discontinuous Current Mode (불연속 전류모드로 동작하는 Interleaved 승압형 역률보상 컨버터의 입력전류 리플개선)

  • 허태원;박지호;노태균;김동완;박한석;우정인
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.17 no.1
    • /
    • pp.116-123
    • /
    • 2003
  • In this paper, interleaved boost converter is applied as a pre-regulator in switched mode power supply. The pre-regulator plays a role to improve power factor. Interleaved Boost Power Factor Corrector(IBPFC) can reduce input current ripple as a single voltage control loop only without inner current loop, because input current is divided each 50% by two switching devices. Each converter cell is also operated in discontinuous current mode and inductor current of each converter is discontinuous. Total input current which is composed by each converter cell is continuous current. Thus, IBPFC is able to improve input current ripple. IBPFC operating in discontinuous current mode can be classified as six modes from switching state and be carried out state space averaging small signal modeling. A control transfer function is obtained according to the modeling. Single voltage control loop is also constructed by the control transfer function. From experimental result, improvement of power factor and input current ripple are verified.

Input Ripple Current Formula Analysis of Multi-Stage Interleaved Boost Converter (다단 인터리브드 부스트 컨버터의 입력리플전류 수식 분석)

  • Jung, Yong-Chae
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.6 no.6
    • /
    • pp.865-871
    • /
    • 2011
  • DC-DC converter commonly used in photovoltaic systems or fuel cell systems is a boost converter. Among several types of boost converter, the interleaved boost converter with small input and output current ripples is widely used in recent years. Because of small input and output current ripples, the circuit can reduce the size of the input and output capacitors. Thus, instead of conventional electrolytic capacitor, the film capacitor with high reliability can be used and this is the life and reliability of the entire system can be improved. In this paper, the input/output current ripple formulas of the multi-stage interleaved boost converter are derived, and the characteristics in accordance with duty are found out. In order to verify the above mentioned contents, the derived results will make a comparison with the calculated values by using PSIM tool.

Compensation method of currents offset with battery charger (차량용 배터리 충전기의 전류옵셋 보상기법개발)

  • Jeong, Hae-Gwang;Kim, Dong-Hee;Lee, Kyo-Beum
    • Proceedings of the KIPE Conference
    • /
    • 2011.11a
    • /
    • pp.211-212
    • /
    • 2011
  • 본 논문은 전기자동차용 배터리 충전기를 위한 전류옵셋 보상기법을 제안한다. 인버터 내부의 스위치의 성능차이 또는 내부 회로의 문제로 인해 입력전류에 옵셋이 발생하게 되면 배터리 충전기와 연결된 직류단 전압에 선 주파수에 해당하는 리플성분이 발생할 수 있다. 이러한 직류단 리플은 배터리 충전 시출력전압의 리플이 되어 배터리의 수명과 성능에 악영향을 끼친다. 제안하는 전류옵셋 보상기법은 추가적인 수동소자나 센서의 추가 없이 입력전류 옵셋을 효과적으로 제어한다. 50kW 급의 전기자동차용 배터리 충전기모델을 이용한 시뮬레이션 결과는 제안하는 보상기법의 타당성과 안정성을 보인다.

  • PDF

Analysis of the Low Frequency Ripple according to a Power Conditioning System Topology and Control Strategy for the Fuel Cell System Applications (연료전지 시스템용 전력변환기(PCS) 회로 및 제어방식에 따른 저주파 리플 분석)

  • Kim, Jong-Soo;Kang, Hyun-Soo;Lee, Byoung-Kuk;Lee, Won-Yong
    • Proceedings of the KIEE Conference
    • /
    • 2007.07a
    • /
    • pp.197-198
    • /
    • 2007
  • 본 논문에서는 연료전지 시스템에서 발생되는 저주파 리플의 전달과정을 분석하고, PCS 회로 및 인버터 제어방식에 따른 저주파 리플 영향을 비교 분석한다. 부스트 컨버터와 풀브리지 컨버터의 입력전류 고조파 분포와 인버터 PWM 스위칭 방식에 따른 입력전류에서의 영향을 고조파 분포 및 저주파 리플 측면에서 분석한다. 풀브리지 컨버터에서 전달되는 저주파 리플 크기가 상대적으로 작은 것을 확인하고, PWM 스위칭 방식은 저주파 리플에 영향을 주지 않는다는 것을 시뮬레이션을 통하여 확인한다.

  • PDF

High Step-Up Cascade Boost DC-DC Converter Using Coupled Inductor with Ripple-Free Input Current (결합 인덕터를 이용한 입력 전류 리플이 없는 고승압 캐스케이드 부스트 DC-DC 컨버터)

  • Lee, Sin Woo;Do, Hyun Lark
    • Proceedings of the KIPE Conference
    • /
    • 2018.07a
    • /
    • pp.428-429
    • /
    • 2018
  • 본 논문은 결합 인덕터를 이용한 입력 전류 리플이 없는 고승압 캐스케이드 부스트 DC-DC 컨버터를 제안한다. 기존 캐스케이드 부스트 컨버터의 단점을 보완하기 위해 제안되었다. 제안된 컨버터는 1차 부스트 단의 보조회로에 의해 입력 전류 리플이 상당히 제거되었으며 2차 부스트 단에 결합 인덕터를 적용하여 높은 전압 이득을 달성하였다. 제안된 컨버터는 이론적 해석과 200[V]-200[W]하드웨어 시작품을 제작하여 검증하였다.

  • PDF

Zero-Ripple Input Current High Step-Up Boost-SEPIC DC-DC Converter with Low Switch Voltage Stress (입력 전류 리플이 없고 낮은 스위치 전압 스트레스를 갖는 고승압 부스트-세픽 DC-DC 컨버터)

  • Lee, Sin Woo;Do, Hyun Lark
    • Proceedings of the KIPE Conference
    • /
    • 2016.11a
    • /
    • pp.117-118
    • /
    • 2016
  • 본 논문은 입력 전류 리플이 없고 낮은 스위치 전압 스트레스를 갖는 고승압 부스트-세픽 DC-DC 컨버터를 제안한다. 제안된 컨버터는 부스트 단의 보조회로에 의해 입력 전류 리플이 상당히 제거되었으며 세픽 단에 결합 인덕터를 적용하여 높은 전압 이득을 달성하였다. 또한 스위치 전압 스트레스는 클램핑 회로에 의해 감소되었으며 따라서 상대적으로 낮은 $R_{ds(on)}$ 갖는 MOSFET을 사용하여 컨버터의 효율이 개선되었다. 추가적으로 결합 인덕터의 누설 인덕터로 인하여 출력 다이오드의 역회복 손실이 완화되었다. 제안된 컨버터는 이론적 해석과 200[V]-200[W]하드웨어 시작품을 제작하여 검증하였다.

  • PDF

A New Current Fed Resonant Converter Suitable for Step Down Application (강압 응용에 적합한 새로운 전류원 공진형 컨버터)

  • Moon, Dongok;Lee, Sanghyuk;Choi, Sewan
    • Proceedings of the KIPE Conference
    • /
    • 2013.07a
    • /
    • pp.295-296
    • /
    • 2013
  • 본 논문에서는 새로운 전류원 공진형 컨버터를 제안한다. 제안한 컨버터는 입력전류 리플이 작으며 모든 스위치와 다이오드의 ZCS 턴온/턴오프를 성취하며 턴온/턴오프 전류의 di/dt가 0이다. 또한, 인터리빙 시 출력전류 리플을 이론적으로 완전히 제거할 수 있다. 제안하는 컨버터의 동작원리를 제시하고 실험을 통하여 타당성을 검증하였다.

  • PDF