• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.399-404
• /
• 2016

The applicability of photostimulated-luminescence (PSL) and thermoluminescence (TL) for the detection of 12 food materials (potato, onion, garlic, dried pumpkin, black mushroom, black soybean, Cheongkukjang powder, sea mustard, pepper powder, Ramyun soup, corn tea, and green tea powder) irradiated with an electron beam, gamma ray, and X ray at a range of 0.15 to 10 kGy was investigated. For PSL, negative results (less than 700 photon counts (PCs)) were observed from non-irradiated foods while the irradiated foods showed intermediate (879 to 2,414 PCs) and/or positive (19,951 to 65,919,035 PCs) values. In all irradiated samples, the maximum peak of the TL glow curve was observed between 150 and $250^{\circ}C$. Our findings demonstrate the successful application of PSL and TL to determine whether food items were irradiated or not. However, there were no significant differences among the radiation sources.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.4
• /
• pp.487-495
• /
• 1996

The consumer perception on health and food habit, the experience of health food use and the discrimination between health food and drug of Korean consumer were surveyed by using a questionnaire containing 20 items in order to obtain the basic data for the assessment of the benefit and risk of health foods in Korea. A total of 1,000 people over 20 years of age living in Seoul and the vicinities were interviewed and asked to fill out the questionnaire during the period from the October 1995 to the February 1996. Among the 882 answers collected 23 was incomplete data, and 859 answers were used for the statistical analysis by using SAS program. The survey revealed a strong interest of the consumer on health food by showing that more than a half of the subjects (58.8%) had the experience of actual use of health food, and 68.2% believed the effectiveness. What the consumer expect most from health food was to have beneficial effect to maintain overall health condition (59.8%), and the most negative aspect of health food was the overstatement on the effectiveness by the producers (52.1%). The most important source of information for the purchase of health food was the suggestion of friends and relatives (30.6%). Among the health foods registered and regulated by the food law, royal jelly (22.7%), squalene (16.0%), refined fish oil (15.1%), lactic acid bacteria (10.6%) and aloe (8.8%) were relatively well aware. Although 84% of the subjects perceived that health food is different from drug or traditional medicine, the largest percentage of the subject selected ginseng as the most well known type of health food (22.7%) as well as the most well known drug (or traditional medicine) (41.7%). Ginseng was also chosen as the most frequently used health food (17.0%), and vitamin tablets the third (13.0%). The vague definition of health food and unambiguous discrimination of it from medicine by the consumers were problematic for the correct use and reasonable purchasing behavior. The clear definition and proper regulation on the manufacture and distribution of health food, more strict control of labelling and advertisement, and a wide consumer education on health food were recommended.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.9
• /
• pp.1139-1145
• /
• 2006

In this study, antioxidant activities of enzymatic and methanolic extracts from E. cava stem and leave were evaluated by measuring the scavenging activities on 1,1 diphenyl 2 picrylhydrazyl (DPPH), hydroxyl radical, hydrogen peroxide and the inhibitory effects on DNA damage induced by oxidative stress of cells. Enzymatic extracts were prepared by enzymatic hydrolysis of both stem and leave using food grade five different carbohydrases (Viscozyme, Celluclast, AMG, Termamyl, Ultraflo) and five proteases (Protamex, Kojizyme, Neutrase, Flavourzyme, Alcalase). The enzymatic extracts were lower than methanolic extracts in polyphenol contents, but higher in extraction yield by approximately 30%. The enzymatic extracts were superior to methanolic extracts in DPPH and H2O2 scavenging activities and DNA damage protective effect. There were no significant antioxidant activity difference between stem and leave, but the extracts of leave were relatively better than those of stem. In this study it is suggested that E. cava stem as well as its leave would be a good raw materials for antioxidants compound extraction and enzymatic hydrolysis would be a good strategy to prepare antioxidant extracts from seaweeds.

• Korean Journal of Soil Science and Fertilizer
• /
• v.4 no.1
• /
• pp.13-19
• /
• 1971

In order to establish the method of improving ill drained paddy soil where the accumulation of absorption inhibitor is worried in the earlier stages of rice growth, proper soil is selected and an field experiment is designed having treatments such as lime materials, none sulfate fertilizers, boron and straw etc. The data of yield and plant analysis in different stages of rice growth is eveluated and discussed to obtain following summaries. (1) Significant yield increase was made by the treatment of lime materials such as slacked lime or wollastonite powder, materials inhibiting the activity of microorganisms such as boron and of none sulfate fertilizers lacking inhibitor producing sources. (2) The crop scientifice causes of decreasing yield are the decreasing the number of panicles per hill, grains per panicle and the weight of grains. (3) The plant nutritional causes of decreasing yield are the lowering of nitrogen content throughout the life, phosphate content since young premodia formation stage of plant and the decreased content of magnesium, calcium and silicate in straw at harvesting stage. (4) The causes of lowering the content of various elements in rice plant grown in ill drained paddy soil are suggested as root damage by producing and accumulating absorption inhibitors such as organic acids and hydrogen sulfide etc, from the following observed facts; (a) In young premodia formation stage, attaining to the maximum production and accumulation of absorption inhibitor, the phosphate accumulation in plant was smaller in the phosphate plots than without phosphate plots and much higher in the neutralized plots by adding lime materials. (b) In the plots of straw addition, the potassium content in plant at the young premodia formation stage is very low probabley due to root damage by absorption inhibitor produced from the process of straw decomposition but higher at the stage of harvesting probably due to the immetabolic negative absorption of damaged roots. (c) The effect of boron, known as the inhibitor of microorganism activity to decompose organic matter, is apparent. (d) The effect of nonsulfate fertilizer treatment, having no source of producing inhibitor such as hydrogen sulfide, was significant. (e) All the yield components, decided around the young premodia formation stage attaining to the maximum inhibitor concentration in soil and minimum root activity, are significantly decreased.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.318-345
• /
• 2013

This study was carried out with a focus on the factor on the periodical space organization of Daebodan (大報壇: the altar of great recompense) in Changdeok Palace, which is significant in terms of political history in the late Chosun Dynasty, and consider the factors in the formation of the structural system through historical records and drawings. Daebodan has the ideology of righteousness to the Ming Dynasty which the hierarchy of the Joseon Dynasty. who felt the crisis of the domination order, imposed as a solution after the Manchu war of 1636. In addition, Daebodan was built by complex factors that entailed the self-esteem of the 'Joseon Centralism Ideology (朝鮮中華)' and the desire of the sacrificial rituals for Heaven that were imminent to the kings of Joseon. Superficially, Daebodan has the spatial organization of the Sajik (社稷) Altar and the placement of an annex building, but had the applied placement due to limited topography and access to the backyard. Furthermore, the lateral structure of Daebodan multiply accepted various factors of the nine step's stairs, the hight of five cheok (尺), the circumstance of two floors that were showed in the altar and platform with small fences and an imperial order including the internal form of Hwangjangbang (黃帳房). Moreover, the name of the alter came from 'the Jiaote Sheng Book of Rites(禮記 郊特牲)' representing 'the suburban sacrifice ritual for Heaven (郊天)', and it was built by not only combining the system of the Sajik Altar in the Joseon Dynasty and China but also avoiding 'excessive etiquette (僭禮).' The point is a remarkable feature shown by the structural system of Daebodan. Thus, it is considered that the 'Notion of Confucian-Cultural Succession (中華繼承意識)' and the desire of the sacrificial rituals for Heaven were expressed by the structure and form of altar. This study examined the process of the creation, expansion, decline and disposal of Daebodan in a chronological order, and found that the ruling ideology of the governing elite by the political and cultural background of the era at each transitional point was reflected in the spatial formation of the altar. On the other hand, as a result of performing a field survey to find the location in accordance with Daebodan in drawing materials, there remains items such as worked stones from Daebodan, precast pavers and fragments of proof tile discovered in the surrounding of tora vine (Actinidia arguta) which is a natural monument of Changdeok Palace. As such, verification through future excavation and investigation is required.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.148-165
• /
• 2017

Mural paintings drawn inside ancient tombs are very sensitive to changes in the environment such as temperature and humidity, especially the finish layer of the tomb murals differ in preservability depending on the material properties and humidity conditions. In this study, I examined the mural painting of Songsan-ri Tomb No.6, where the finish layer was made of earth, and identified the physical changes that can occur due to drying, depending on the material properties of the finish layer. I found out through particle size analysis that the finish layer of the mural painting in Songsan-ri Tomb No.6 is about 85.0wt% below silt, about 14.0wt% clay therein, mostly composed of silt and below clay. I also found out through physical property evaluation that surface change rate of samples showed the largest change at 15.5% in reproduced finish layer sample made up of bentonite, followed by 7.8% of reproduced finish layer sample made up of celadon soil, 6.3% of reproduced finish layer sample made up of loess, 6.2% of reproduced finish layer sample composed of white clay and the same order of change in appearance was confirmed in each sample consisted of soil. In addition, it showed the same trend of surface change rate, and the bentonite condition showed the largest change, in the measurement of shrinkage rate and expansion rate. The experiment shows that the finish layer composed of soil is affected by cohesion among particles according to the content of fine parts and the relationship between the agglomeration due to the content of the differentiated part and the stress due to the expansibility depending on the kind of the clay mineral etc. Therefore, it can be concluded that the physical damage occurred in the mural painting finish layer of the Songsan-ri Tomb No.6 is related to the factors such as the material characteristics of the soil and the highly humid environmental change inside the tomb.

• Journal of the Daesoon Academy of Sciences
• /
• v.38
• /
• pp.153-182
• /
• 2021

The Buddhist monk, Kim Ji-jang (金地藏), a native of Silla, is still revered as Ksitigarbha Bodhisattva in China. In Chinese Buddhism, Kim Ji-jang's becoming Ksitigarbha Bodhisattva is unique in at least two ways. First, it is said that his becoming the bodhisattva originated not in Silla, but in China, a foreign country. Second, it is said that the historical person became regarded as a mythical being, Ksitigarbha Bodhisattva. The process of Kim Ji-jang's becoming Bodhisattva can be divided into three periods. The first period is the period of entering and practicing at Mount Jiuhua in China, and this also includes the period wherein he was first revered as Ksitigarbha Bodhisattva. The second period begins immediately after Kim Ji-jang's death and ends three years later. In this period he became regarded as Ksitigarbha Bodhisattva. The third period spans three years after his death to the present age. His status as Ksitigarbha Bodhisattva carries on at present. There are two main causes for Kim Ji-jang's transformation into the bodhisattva. The first is an internal bodhisattva process. According to Ksitigarbha Bodhisattva's main vow, Kim Ji-jang's practice and edification impressed the public. The second is an external bodhisattva process. The miracles that appeared at the time of his death or the manifestation of the incorruptible relics three years after his death played a decisive role in the process of Kim Ji-jang becoming a bodhisattva. In line with the public's devotion, the Chinese imperial family repaired and supported the temple that enshrined the relics of Kim Ji-jang. Various factors could be analyzed in the process of Kim Ji-jang's becoming Ksitigarbha Bodhisattva, but more than anything else, it was Kim Ji-jang's severe ascetic practices and his virtuous edification of others.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.51-61
• /
• 2022

Earthenware horn cups with horse head decorations were excavated from Tomb No. 7 of Bokcheon-dong, Dongraegu, Busan Metropolitan City. Made of earth in the shape of a horn, these cups are considered to have been used to drink alcohol or beverage. Large numbers of earthenware horn cups of various shapes were excavated from tombs located in the old territories of Silla and Gaya. A pair of earthenware horn cups were excavated from Tomb No. 7, and the two cups are almost identical in overall shapes and manufacturing techniques despite different sizes. Conservation treatment was carried out for the bigger one of the two horn cups this time. There are two cracks toward the horse head decorations around the mouth with missing parts observed. The chest of the horse touches the ground with one side decorating the horse head and the other side facing the conical mouth of the horn cup. It is in the U shape, striking a balance based on two legs attached behind. The surface of the horn cup was made with a potter's wheel, and the connection to the horse head has traces of cutting and trimming. The horse head is expressed realistically with its features including the ears, eyes, nose, and mouth well apprehended and its color is grey This study intended to investigate manufacturing techniques of the artifact by examining its internal structure through the condition survey in a non-destructive way. CT imaging was used to figure out its manufacturing techniques and to diagnose its condition, and accordingly the scientific conservation treatment was conducted to stabilize the artifact. The precise diagnosis on conservation condition found that there are two chips in the spout with their cracks extended. One of the chips is connected with separation added to the crack. The material which has been used for connection in the past was collected for the infrared spectroscopic analysis, which was identified to be nitrocellulose resin for the connection. Therefore, this conservation treatment focused on removing the old material and preventing the spread of cracks. Before conservation treatment, the condition survey and scientific examination for the artifact were carried out to secure data about the earthenware horn cup with horse head decorations(Treasure). Based on them, effective plans for its conservation treatment was sought for and then existing adhesive was safely removed, and restoration material was selected to take into account its reversibility. In addition, the conservation treatment according to optimal methodologies was conducted through the consultation meeting with experts.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.1
• /
• pp.37-42
• /
• 2021

Munseom (Island) is known as the largest native Elaeocarpus sylvestris var. ellipticus in Korea. Recently, disease damage from the E. sylvestris var. ellipticus community has been reported in Munseom. This study was conducted to understand the damage situation and growth characteristics of the E. sylvestris var. ellipticus population in Munseom. The purpose of this study was to evaluate the spontaneous regeneration potential of the community by grasping the characteristics of the population of surviving E. sylvestris var. ellipticus individuals, and to discuss ways to restore native habitats. A total population survey was conducted to determine the distribution status of E. sylvestris var. ellipticus individuals. The field survey carefully recorded the height of tree, DBH, DRH, and growing status, along with GPS location information of the individual. The growth status of E. sylvestris var. ellipticus individuals distributed in Munseom and the characteristics of tree height, DBH, DRH of each individual were analyzed. The total number of E. sylvestris var. ellipticus populations identified in Munseom was 293. The dense E. sylvestris var. ellipticus community reported in 2005 has been identified as being greatly damaged or damaged. In particular, the damage was more serious in mature trees with a height of 6m or more forming the canopy layer in the forest, and it was confirmed that 80.6% of the mature trees died. In the growth characteristics of the old-growth tree, which is an indicator of the health of the forest based on DRH, 75.4% died or the growth condition was found to be poor. In order to restore the native habitat of E. sylvestris var. ellipticus in Munseom, conservation efforts such as pest control, preservation of mature trees, control of the territory of young trees, and reintroduction after ex-situ transplantation etc. are considered necessary.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.138-164
• /
• 2022

The Neolithic shell midden in Daejuk-ri, Seosan, is distributed on the gentle slope of a low hill close to the west coast. The bedrock of the area consists mainly of schist with various mafic minerals, but shows a partial gneiss pattern. The site consists of loamy topsoil and clay loam subsoil, and the degree of siallization is relatively low. Although the pottery excavated from the shell midden shares mostly similar features, a variety of shapes and patterns coexist. The surface colors, thickness and physical properties are slightly different. The pottery can be subdivided into three types (IA, IB and II) according to the composition of the body clay, the temper and the existence of a black core. Types IA and IB are colorless mineral pottery with a non-black or black core respectively. TypeII is colored mineral pottery with a non-black core. Type I pottery also contains non-plastic colored minerals, but type II contains a large amount of biotite, chlorite, talc, amphibole, diopside and tremolite, which include a large amount of Mg and Fe. The studied pottery contains a small amount of organic matter. Considering the grain size and relatively poor sorting and roundness of the non-plastic particles, the pottery appears to be made by adding coarse non-plastic tempers for special purposes to the untreated weathered soil around the site. The three types of pottery seem to have been incompletely fired in general. While type IB has the lowest degree of oxidation, typeII shows the highest degree of redness and oxidation. It can be interpreted that these differences depend on the firing temperature and the ratio of non-plastic particles. Through a synthesis of the minerals, geochemical data and thermal history, it can be determined that the firing temperature ranged from 600 to 700℃. The pottery types of the Daejuk-ri Shell Midden have slightly different production conditions, mineral compositions, and physical properties, but have undergone similar production processes with basically the same clay materials. The clay is almost identical to the composition of the bedrock and weathered soil distributed in the Daejuk-ri area. Currently, there is an industrial complex in the area, so it is difficult to confirm the soil and geological distribution of the site. However, it is highly probable that the area around the site was self-sufficient for the clay and tempers required for the production of the Neolithic pottery. Therefore, it can be interpreted that the group that left the shell midden in Daejuk-ri lived near the site, visited the site for the purpose of collecting and processing shellfish, and discarded the broken pottery along with shells.