• Resources Recycling
• /
• v.12 no.3
• /
• pp.3-12
• /
• 2003

Physical separation containing grinding, sieving, dry magnetic separation and air classification were carried out in order to recover Ta anode from waste Ta condenser. Roll crusher wat used for the liberation of resin and metals in closed circuit system. The liberation between Ta anode and resin was easily achieved, whereat some of metals did not liberated from the Ta anode when the waste condenser was crushed below 8 mesh. When the crushed sample were divided into 8/10 mesh, 10/18 mesh and -18 mesh, metals was mainly remained in 8/10 mesh in contrast to Ta anode was in +18 mesh. It was shown that resin was more easily crushed rather than metals from the result of that resin content was 71.5％ in -18 mesh. The liberation efficiency was different with the input size of the crushed sample and average efficiency was 62.3% due to the locked Ta anode particles. The results of air classification test for the crushed samples showed that optimal air flow are 39㎥/h, 32㎥/h, 20㎥/h. respectively. When the sample were separated with optimal condition, 94.45％ Ta anode containing 97.47 wt.％ Ta anode, 0.93 wt.％ resin. 1.61 wt.％ metal was recovered with 49.39 wt.％ yield.

• Resources Recycling
• /
• v.8 no.3
• /
• pp.9-17
• /
• 1999

The study investrgated the properti es of lh$\xi$ dust~ from felToalloy manufacture, The chemical composition, composItron material, particle size and shapes of the bulk dust, sized dust and magnetically separated dust were llivestigated. As the result, we s suppose that the dust from HLgh Carbon Fenomauganesc Manufacturing Process is not sufficient as soource material of Mn because of the low Mn conteut (13.5%) aud complicated composition material The dust from Bag Filter of AOD Process is m mainly made up of $0.2~2\mu\textrm{m}$ $Mn_3O_4$ (Hausmatmite) particle in spherical shape and the Mn content is 63.1%. The dust from Cooler of AOD Process is mainly made up of coarse $Ca(OH)_2$ Mn, $Fe_yO_2$ $SiO_2$ and fine $Mn_3O_1$.

• Cement Symposium
• /
• no.31
• /
• pp.198-204
• /
• 2004

온라인 분쇄입도 조절 콘트롤(Insitec) 시스템은 시멘트의 생산공정상에 시멘트입도를 직접 측정하고 측정된 데이터를 이용하여 공정을 제어할수 있는 새로운 방법으로서, 세계적으로 50여개의 시멘트 생산 현장에 이러한 시스템이 설치되어 있다. 시멘트의 생산공정은 일반적인 분쇄공정과는 차별되는 나름데로의 특성이 있으므로 이를 개발한 Malvern Instrument사(영국)에서는 시멘트 공장의 특성에 적합한 시스템을 개발해왔다. 우선 가장 이상적인 Instec 시스템의 설치를 위해서는 다음과 같이 3단계의 절차가 필요하다. 첫 단계로서 공정상의 변수로 적용되어야 될 변화를 찾아 모니터링하고 연관시키는 것이다. 그 다음 단계에서, 시멘트 생산공정을 24시간 동안 모니터링하여 설정 값과 측정 값과의 차이점과 원인을 찾아내어 요인을 결정하게 되고, 마지막 단계에서는 현장에 장비를 설치, 상기의 반복과정을 마무리하고 공정을 제어할 수 있게 하는 것이다. 시멘트 생산공정에서 분쇄기, 분급기 및 송풍기 등의 회전수 증가와 감소, 시멘트조성의 변화와 같은 중요한 공정상의 변화가 있을 경우, 이로 인해 생기는 입도의 영향은 Insitec 시스템의 입도관리에 기록되게 된다. 본 논문에서는 스페인의 Jerez에 있는 Holcim 플랜트에 설치된 Insitech를 이용하여 운전상의 변수 등을 측정하고 제어하며 시멘트 공정에 활용하는 방안에 대한 연구를 소개한 것이다.

• Journal of the Microelectronics and Packaging Society
• /
• v.1 no.1
• /
• pp.51-60
• /
• 1994

RuO2 계 후막저항체에 사용된 유리의 입도 및 연화점이 후막저항체의 전기적 특성 에 미치는 영향을 시험하기 위하여 연화점이 서로 다른 두 종류의 유리를 제조하고 이들을 미분쇄하여 각각 세 조류의 평균입도로 분급하였다. 이 유리분말들을 이용하여 여섯 종류의 후막저항체를 제조하고 그 저항체들의 전기적 특성을 평가하고 고찰하였다. 연화점이 높은 유리로 만든 후막저항체들보다 높은 쉬트 저항을 나타냈다. 또한 후막저항체들의 쉬트 저항 및 저항온도계수는 저항체들의 미세조직과 밀접한 관계가 있음을 확인하였다.

• Journal of the Korean association of regional geographers
• /
• v.13 no.1
• /
• pp.43-53
• /
• 2007

Rapid geomorphic changes occur in Nakdong River deltaic coast which is composed of deltaic barrier islands and tidal flats. We investigate the pattern of these rapid geomorphic changes by analyzing the distributions of sediment grain size characteristics. The distributions of sediment grain size characteristics analysis is a very efficient method to explain geomorphic changes of deltaic barrier islands. In sediments from Jinwoo Island, Sinja Island, and Doyo Island which are composed of Nakdong River deltaic coast, mean particle size increases to onshore direction and become coarser in tidal inlets. All sediments are very well sorted. Though almost sediments show little negative skewness, several sediments from tidal inlets show negative skewness. These results provide that the stronger and more regular energies affect Nakdong River deltaic coast and make fine sediments selectively move toward tidal inlets. Because of this mechanism, the recurved spits of deltaic barrier islands enlarge.

• Resources Recycling
• /
• v.10 no.3
• /
• pp.14-22
• /
• 2001

For the recycle of coal fly ash generated from power stations, we developed an electrocyclone system which can separate unburned carbon form coal fly ash, based on the fact that coarse fly ash particles contain higher amount of unburned carbon and unburned carbon particles are charged positively, and pure ash particles are charged negatively on contacting each other. Additionally, guide vanes were installed in the cyclone to control the cut size. Two types of electrode, stick and grid type, were designed to investigate the effect of electrode type. Results show that by introducing an electric field inside the cyclone, the yield increases by 5 to 15e1o. But the content of unburned carbon in the clean ash does not change significantly.

• Resources Recycling
• /
• v.3 no.2
• /
• pp.9-16
• /
• 1994

In this study, the grinding and wet cyclone process of the dust for the effective separation of high purity iron powder and iron oxide were investigated. The results obtained in this study can be summarized as follows: 1. By applying the wet cyclone technique for the iron powder(+200 mesh) produced from EC dust of the Kwangyang 2nd steel making factory, the iron powder of high content more than 99.76% of Fe was obtained with 47.66% yield at grinding time of 5 minutes by attritor. 2. The particle size distribution of the iron powder recovered from converter dust is quite simillar with the iron powder of sweden Hoganas Co.(W40.24, W40.29, W40.37, W40.37OX). 3. By using iron powder, copper ions are all adsorbed and removed in any concentration ranges of copper sulfate solution(Cu:100, 200, 300, 600 ppm).

• Journal of the Korean earth science society
• /
• v.23 no.8
• /
• pp.722-735
• /
• 2002

In order to reveal sedimentary facies and geochemical characteristics on sediments distributed in upper intertidal zone, the southwestern coast of Korea, grain size and metal content analyses to the sediments were carried out. The grain size distribution of sediments shows very wide range from gravel to mud. The sediments are very well sorted to very poorly sorted and mostly positively skewed. Geochemical behavior of metals in the sediments is dependant on grain size, in part, but might be much controlled by complex submarine topography, highly varied tidal currents and surrounding land geology in the study area. Igeo (index of geoaccumulation) representing metal condensation in the sediments moderately/strongly polluted in Co and Cr and moderately polluted in Cu and Ni. But notable metal condensations are not found in the study area. So, it might be interpreted that grain size and metal content distribution tendencies in the sediments are considerably influenced by complex submarine topography, highly varied tidal currents and surrounding land geology.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.769-774
• /
• 1993

Defatted rice bran was microparticulated using fluidized bed opposed jet mill and air-classified at different air classifying wheel speed (ACWS) in Turboplex classifier. The median particle size and the standard deviation decreased, and concomitantly the specific surface area increased generally with increasing ACWS. The protein, fat and ash contents of the recovered rice bran increased with ACWS. The contents of minerals; magnesium, zinc, iron and manganese; increased positively with ACWS. The phytic acid content, however, was slightly higher at middle ACWS. The dietary fiber content was highest in the ACWS 15,000 rpm fraction showing 31.47%. Higher ACWS resulted in lighter colored powder. The water holding capacity (WHC) showed the maximum value at ACWS 12,000 rpm and decreased with increasing ACWS, while the oil holding capacity (OHC) increased with ACWS. The rheological property of the microparticulated rice bran/water suspension fitted to the linear model. The yield stress and viscosity of the suspension increased with ACWS. The shape of microparticulated rice bran at ACWS 21,000 rpm was spherical, and the median particle size was $3.7{\mu}m$. When cake was prepared with substitution of microparticulated rice bran at 5%, the cake height and volume increased remarkably.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.1
• /
• pp.19-31
• /
• 2005

A study on the beneficiation of illite occurring in Youngdong province is performed with applying selective grinding and air classification techniques. Quartz and illite are occurred as major components, and sulfide minerals such as pyrite, chalcopyrite are associated as minor components. The result of sieving test shows that contents of Al₂O₃, K₂O and ignition loss are increased, whereas SiO₂ is decreased with particle size decrease. Fe₂O₃ content is almost same in all the particle size range but slightly lower at coarse particles. The yield of fine particles is increased with increasing rotor speed in both grinding stage and air classification stage. When the selective grinding and air classification are carried out at optimal condition, yield of the concentrate is 76.16 wt.%. The chemical compositions of the concentrate are SiO₂70.13%, Al₂O₃ 19.40%, Fe₂O₃ 1.62%, K₂O 5.20%, and ignition loss 2.77%. The beneficiation process developed in the current study is very effective method which purification and particle size control can be achieved simultaneously.