• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.99-103
• /
• 2003

An analysis of the flow within supersonic turbine cascades is necessary to design and manufacture turbo-pump system. Because of the differences between the specified inlet boundary value and the computed inlet value caused by the far field inlet boundary condition, the computations at desired inlet conditions can not be achieved. So, this paper studied the problem occurred when far field inlet conditions were specified as inlet boundary conditions. And the numerical analyses using Fine Turbo, CFD Program, has been performed and compared with those of experiments when a converging-diverging nozzle or a linear nozzle was located in front of cascades instead of the far field inlet condition.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제31권5호
• /
• pp.479-486
• /
• 2011

In image-based CFD modeling of carotid bifurcation hemodynamics, it is often not possible (or at least not convenient) to impose measured velocity profiles at the common carotid artery inlet. Instead, fully-developed velocity profiles are usually imposed based on measured flow rates. However, some studies reported a pronounced influence of inflow boundary conditions that were based on actual velocity profiles measured by magnetic resonance imaging which showing the unusual presence of a high velocity band in the middle of the vessel during early diastole inconsistent with a Dean-type velocity profile. We demonstrated that those velocity profiles were induced by the presence of modest secondary curvature of the inlet and set about to test whether such more "realistic" velocity profiles might indeed have a more pronounced influence on the carotid bifurcation hemodynamics. We found that inlet boundary condition with axisymmetric fully-developed velocity profile(Womersley flow) is reasonable as long as sufficient CCA inlet length of realistic geometry is applied.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제37권9호
• /
• pp.815-821
• /
• 2013

The efficiency and lifetime of a polymer electrolyte membrane fuel cell (PEMFC) system is critically affected by the humidity of the incoming gas, which should be maintained properly under normal operating conditions. Typically, the incoming gas of a fuel cell is humidified by an external humidifier, but few studies have reported on the device characteristics. In this study, a laboratory-scale planar membrane humidifier is designed to investigate the characteristics of water transport through a hydrophilic membrane. The planar membrane humidifier is immersed in a constant temperature bath to isolate the humidifier from the effect of temperature variations. The mass transfer capability of the hydrophilic membrane is first examined under isothermal conditions. Then, the mass transfer capability is investigated under various conditions. The results show that water transport in the hydrophilic membrane is significantly affected by the flow rate, operating temperature, operating pressure, and flow arrangement.

• Journal of Energy Engineering
• /
• 제26권1호
• /
• pp.23-27
• /
• 2017

An expander of an organic Rankine cycle is an essential component that significantly influences its entire performance and cycle efficiency. The inlet pressure and temperature of the expander used for the organic Rankine cycle are limited by the expander's mechanical properties and the characteristics of the working fluid. The organic Rankine cycle's output, heat absorption, and efficiency are altered by the inlet pressure and temperature of the expander. In this study, a theoretical comparative analysis was conducted on an organic Rankine cycle's performance changes, which are dependent on the inlet condition of the expander. The working fluid is an R134a refrigerant, and the expander is a positive-displacement type.

• Proceedings of the KAIS Fall Conference
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.108-112
• /
• 2001

본 논문에서는 전산유체해석 기법을 이용하여 저소음ㆍ고효율 공조기의 입구형상에 대한 유동해석을 하였다. 공조기 입구형상을 결정하는 여러 설계변수가 입구와 출구의 유동조건과 유로의 압력손실에 미치는 영향을 평가하였다. 이를 바탕으로 입구와 출구유동의 균일성과 압력손실의 최소화를 만족하는 최적의 설계 변수를 결정하여 공조기의 최적설계를 달성하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.2000-2004
• /
• 2008

본 지침은 하천 횡단시설물을 설치하는 경우, 효율적인 어류 이동을 위한 어도 설계 및 설치 기법을 제시함에 있다. 어도의 설계 조건으로는 상류 이동 어류가 어도입구 이외의 장소에 모여들지 않아야 하고, 이동 어류의 손상이나 극도의 피로를 피하도록 하여야 하며, 어도의 입구에 모인 어류의 어도로의 유인이 용이하여야 한다. 또한 어류가 쉽고 안전하고 신속하게 상류 이동할 수 있어야 한다. 주요 내용으로, 어도의 하류측 돌출 조건, Set back식 어도, 하류 턱 설치, 어도의 하류 끝단의 설계, Notch부의 단면 형상, 어도의 접속 조건, 로프 설치 조건, 어도의 하류부 설치 기법, 강하용 어도의 설계 기법 등을 제시하였다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.55-56
• /
• 2006

냉매 충전량과 이차유체의 입구조건은 $CO_2$용 열펌프시스템의 성능실험에서 중요한 제어변수이다. 따라서, 열펌프사이클의 적용과 난방성능 향상을 위해 제어변수의 특성을 조사하는 것이 필요하다. 본 논문에서, $CO_2$용 열펌프 사이클의 성능 실험은 여러 가지 냉매 충전량에서 이차유체 입구조건에 변화를 주어 수행 되었다. 실험결과, 난방COP는 냉매 충전량이 증가함에 따라 1158g의 냉매 충전량에서 최대가 되었다가 감소하는 경향이 나타나며, 이는 COP가 최대가 되는 냉매충전량이 존재함을 나타낸다. 또한, 난방성능은 가스쿨러내 이차유체의 질량유량의 증가에 따라 증가하였다. 가스냉각기내 2차유체의 입구은도가 $10^{\circ}C$에서 $40^{\circ}C$로 증가하면, 난방용량, 압축일량, 토출압력은 각각 -8.57%, -35.89%, 32.78%로 변화했으며, 증발기 2차유체의 입구 온도가 감소하였을 때 난방COP는 감소하는 경향을 보였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.205-209
• /
• 1996

원자로 입구노즐에서 원자로 냉각재 펌프에 의한 맥동압력 준위를 원자로 하향통로와 저온 관을 상관시켜 예측하는 방법에 관하여 분석하였다. 원자로 하향통로에서의 맥동압력은 원자로 내부구조물의 건전성 평가에 쓰이는 중요한 인자로 이 값을 정확히 구하기 위해서는 경계조건인 입구노즐에서의 맥동압력을 정확히 예측해야 한다. 이를 위해 원자로 하향통로와 저온관을 상관시켜 원자로 입구노즐에서의 펌프에 의한 맥동압력 준위를 계산하였으며 Palo Verde Unit 1의 실험치와 비교 분석하였다. 분석 결과, 제시된 맥동압력 준위 예측모델은 500℉의 경우 비교적 잘 일치하였으나, 565℉의 경우 상당한 차이가 있었으므로 추가적인 검토 및 수정 작업이 요구된다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• 제7권2호
• /
• pp.217-224
• /
• 1995

The effects of duct inlet conditions on fan characteristics and upper wind velocity fields were investigated for two kinds of impellers. As the duct inlet condition, the relative positions between duct inlet and fan impeller and the size of baffle plate mounted on a duct inlet were selected. The 3-dimensional velocity components in flow fields were measured by a 5-holes pitot tube. From the results of measurements, it was found that the size of baffle plate scarecely effect on upper wind flow fields and characteristics of fan. It was also confirmed that the upper wind velocity distributions can be estimated by the potential flow field with large baffle plate at duct inlet.

• Journal of the Korean Society for Railway
• /
• 제12권4호
• /
• pp.457-464
• /
• 2009

The now velocity distribution at inlet of diesel Particulate filter (DPF) which is connected to each curved duct was simulated using $STAR-CD^{(R)}$. Three kinds of models which describe the shapes of the curved duct ware used for the CFD simulation. The simulation results were compared with the experimental data of velocity distribution which was obtained using a Pitot tube and 2-D positioning machine. At the $90^{\circ}$ curved connecting condition, the CFD simulation results of flow velocity distribution at inlet of the DPF showed a horse hoop shape shifted from the axial center line of the DPF. The CFD simulation results agree reasonably with those of the experiments.