• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.381-387
• /
• 1994

In this paper, we found the improved SPICE heat transfer modeling of impulsed magnetizing fixture system and investigated temperature characteristics using the proposed model. As the detailed thermal characteristics of magnetizing fixture can be obtained, the efficient design of the impulsed magnetizing fixture which produce desired magnet will be possible using our heat transfer modeling. The knowledge of the temperature of the magnetizing fixture is very important of forecast the characteristics of the magnetizing fixture which produce desired magnet will be possible using our heat transfer modeling. The knowledge of the temperature of the magnetizing fixture is very important to forecast the characteristics of the magnetizing circuits under different conditions. The capacitor voltage was not raised above 810[V] to protect the magnetizing fixture from excessive heating. The purpose of this work is to compute the temperature increasing for different magnetizing conditions. The method uses multi-lumped model with equivalent thermal resistance and thermal capacitance. The reliable results are obtained by using iron core fixture (stator magnet of air cleaner DC motor) coupled to a low-voltage magnetizer(charging voltage : 1000[V], capacitor : 3825[$\mu$F]. The modeling and experimental results are in close aggrement.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.2
• /
• pp.206-215
• /
• 1994

A method for simulating general characteristics and temperature characteristics of discharging SCR of the capacitor discharge impulse magnetizer-magnetizing fixture system using SPICE is presented. This method has been developed which can aid the design, understanding and inexpensive, time-saving of magnetizing circuit. As the detailed characteristic of magnetizing circuit can be obtained, the efficient design of the magntizing circuit which produce desired magnet will be possible using our SPICE modeling. Especially, computation of the temperature rise of discharging SCR is very important since it gives some indication of thermal characteristic of discharging circuit. It is implemented on a 486 personal computer, and the modeling results are checked against experimental measures. The experimental results have been achived using 305[V] and 607[V] charging voltage, low-energy capacitor discharge impulse magnetizer-magnetizing fixture of air cleaner DC motor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.2
• /
• pp.1-7
• /
• 1997

커패시터 방전회로의 제작 및 시험을 위해서는 고가의 비용과 위험요소가 내재되어 있으며 특히 고전력 응용을 위해서는 이러한 요소는 더욱 커지게 된다. 그 대체방법으로는 컴퓨터를 이용하여 이 회로의 동작을 모델링하고 시뮬레이션하는 것이다. 본 연구에서는 커패시터 방전 임펄스 착자가 착아 요크 시스템을 위한 SPICE 모델을 개발하고 시뮬레이션 결과를 실제 시스템의 측정치와 비교하였다. 또한 착자기 시스템의 방전회로를 위한 온도산정방법을 제안하였다. 특히 임펄스 착자기의 방전회로의 온도산정은 착자회로 설계의 중요한 지침이 되므로 극히 중요하다. 본 연구에 이용된 착자기는 저손실 유입 커패시터이며, 최대 1200[V]의 충전이 가능하다. 이러한 착자 모델의 개발을 통하여 고임펄스 방전 회로의 설계 및 개발에 소요되는 시간 및 비용을 절약하는데 크게 기여할 것이다.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1098-1100
• /
• 1993

In this paper, We found the thermal characterstic of impulsed magnetizing fixture system through the SPICE modeling and investigated the applied possibility in application aspects. As the detailed thermal characteristic of magnetizing fixure can be obtained, the efficient design of the magnetizing fixture which produce desired magnet will be possible using our thermal modeling. The purpose of this work is to compute the temperature increasing for different magnetizing conditions. The method uses multi-lumped model with equivalent thermal resistance and thermal capacitance. The model ing and experimental results are in close agreement.