• Title/Summary/Keyword: 임시 공간

Search Result 134, Processing Time 0.031 seconds

Evaluation of Flexural Behavior of Hollow Prestressed Concrete Pile for Continuous Pile Wall (주열식 벽체용 중공 프리스트레스트 콘크리트 파일의 휨거동 평가)

  • Lee, Young-Geun;Jang, Min-Jun;Yoon, Soon-Jong
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.18 no.3
    • /
    • pp.20-27
    • /
    • 2014
  • In the construction site, various earth retaining systems are developed and applied to maintain stability of excavated area and structures. Among the methods, the underground continuous wall and the column-type diaphragm wall methods are especially used in construction site nearby buildings or roads. However, these methods have some disadvantages such as the difficulty of quality control and long curing time because these methods need to cast fresh concrete at the construction site. In addition, these methods are usually applied to the site for the temporary purpose. In this paper, we suggest precast hollow prestressed concrete pile for continuous pile wall system. To investigate the structural behavior of suggested pile, which is the main member of the suggested system, tests pertaining to the structural behavior and prestressing force applied in the pile are conducted. From the test results, it was found that the prestressing force measured is sufficient compared with the value obtained by the design equation and the cracking moment measured is 34% higher than the design value. In addition to the above, this precast hollow prestressed concrete pile has an additional safety margin that the maximum moment is 59.2% higher than the cracking moment which is one of the serviceability limits for the design of the system.

Accelerated Convolution Image Processing by Using Look-Up Table and Overlap Region Buffering Method (Loop-Up Table과 필터 중첩영역 버퍼링 기법을 이용한 컨벌루션 영상처리 고속화)

  • Kim, Hyun-Woo;Kim, Min-Young
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.49 no.4
    • /
    • pp.17-22
    • /
    • 2012
  • Convolution filtering methods have been widely applied to various digital signal processing fields for image blurring, sharpening, edge detection, and noise reduction, etc. According to their application purpose, the filter mask size or shape and the mask value are selected in advance, and the designed filter is applied to input image for the convolution processing. In this paper, we proposed an image processing acceleration method for the convolution processing by using two-dimensional Look-up table (LUT) and overlap-region buffering technique. First, based on the fixed convolution mask value, the multiplication operation between 8 or 10 bit pixel values of the input image and the filter mask values is performed a priori, and the results memorized in LUT are referred during the convolution process. Second, based on symmetric structural characteristics of the convolution filters, inherent duplicated operation region is analysed, and the saved operation results in one step before in the predefined memory buffer is recalled and reused in current operation step. Through this buffering, unnecessary repeated filter operation on the same regions is minimized in sequential manner. As the proposed algorithms minimize the computational amount needed for the convolution operation, they work well under the operation environments utilizing embedded systems with limited computational resources or the environments of utilizing general personnel computers. A series of experiments under various situations verifies the effectiveness and usefulness of the proposed methods.

애니메이션 <하울의 움직이는 성>에 나타난 여성상의 고찰

  • Lim, Chan
    • Archives of design research
    • /
    • v.19 no.2 s.64
    • /
    • pp.293-300
    • /
    • 2006
  • Mr. Miyazaki's heroines tend to be plucky young women who combine guileless decency with tough-mindedness. However, in his the latest film the female character often change herself into wise older women who sometimes serve as foils, sometimes as mother figures. His heroine, Sophie, starts out as a shy girl, but then a curse transforms her into 90-year-old. Her partner is Howl who supports and is supported by Sophie their mutual drawbacks. At first horrified by the change, she comes to embrace it as a liberation from anxiety, fear and self-consciousness, and discovers in herself a new zest for adventure. The castle is surely one of the most extraordinary contraptions to appear on screen recently, more ingenious in its way than the intergalactic armada. It ranges freely from place to place and is also, somehow, in several places at once, its magical front door opening onto different landscapes with the flip of a knob. It is not exactly haunted, but it is nonetheless infused with whimsical and sometimes somber spirits. Sophie, in both her incarnations, joins an impressive sisterhood of Miyazaki heroines, whose version of girl power presents a potent alternative to the mini-machismo that dominates American juvenile entertainment.

  • PDF

Development of Operation Control and Warning System of Movable Weir for River Safety Management (안전한 하천관리를 위한 가동보 방류제어 및 경보 시스템 개발)

  • Kim, Phil Shik;Kwon, Hyung Joong;Lee, Jae Hyouk;Cho, Bum Jun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.558-558
    • /
    • 2015
  • 하천 시설물은 홍수시 혹은 비상시 운영할 수 있는 경보시스템이나 관리지침 등의 마련이 필수적임에도 불구하고, 현재까지 가동보 시설물에 대한 비상시 운영 메뉴얼 및 경보시스템이 구축되지 못한 실정이다. 4대강 살리기 사업이나 하천정비사업과 같은 대표적인 하천관련 사업에서 단순한 하천 이 치수 목적뿐만 아니라 소수력 발전, 친수공간조성 등의 다목적 활용을 위하여 가동보 설치 사업이 다수 수행되었으며, 현재 국내 하천에 약 1,200여개의 가동보가 설치 운영되고 있다. 이와 같이 다목적 활용을 위하여 가동보의 수요가 급증하는데 반해, 각 설치 현장 상황에 적합한 가동보 운영지침이나 비상경보시스템이 구축되지 못한 실정이며, 적절한 지침 없이 관행적인 가동보 방류로 인한 물놀이 안전사고나 인명피해가 속출하고 있는 실정이다. 2012년 11월에는 하천 제수변 공사를 위해 전주천에 설치한 가동보를 임시적으로 방류하였는데, 하류측의 안전을 확인하지 않고 관행적으로 가동보를 방류하였고, 경보시스템의 부재로 인하여 가동보 하류측 징검다리를 건너는 유치원생들이 급류에 휩쓸리는 사고가 발생하였고, 최근 2014년 5월에는 수원시에 위치한 원천저수지 여수로 둑에 설치된 가로 34m 높이 1.6m 크기의 가동보가 공기압축기의 오작동으로 인하여 보 높이가 낮아지면서 약 30분 원천저수지 하류의 원천리천에 갑자기 무리 불어나 산책로가 침수되고 인근에 산책하던 주민들이 휩쓸려 떠내려가는 사고가 발생하였다. 해외에서도 가동보 운영 미숙으로 인하여 인명사고가 발생하는데, 2008년 11월 호주에서는 하류측 상황 점검이나 경고 방송 없이 가동보를 도복시켜 4살 여아가 급류에 사망하는 사고가 발생하였다. 국외의 경우에는, 상류측 홍수 수위나 하류측 역류 수위를 조절하기 위하여 가동보의 높이를 제어하는 시스템을 구비하고 있지만 이러한 시스템 역시 단순한 수위조절 기능으로서 가동보의 방류량을 제어하지 못하는 실정이다. 가동보를 운영하기 위한 조작시스템은 국내의 경우, 조작실의 조작판넬을 이용하여 가동보의 기립/도복 조작이나 원격 조작 기능과 같은 단순기능만을 구비하고 있어 가동보 방류시 하류측의 범람 피해를 야기하고 있다. 본 연구에서는 가동보 방류에 의한 하류측 범람 피해를 최소화하기 위하여 (1) 가동보 도복에 의한 방류량 산정 알고리즘을 개발하고, (2) 방류량에 따른 하류측 수위상승 범위 예측 기법을 개발하고, (3) 가동보 도복 속도를 제어하는 방류량 제어시스템을 개발하고, (4) 가동보 방류에 의한 비상경보시스템을 개발하였다.

  • PDF

Evaluation on In-plane Shear Strength of Lightweight Composite Panels (경량 복합패널의 면내 전단 성능 평가)

  • Hwang, Moon-Young;Kang, Su-Min;Lee, Byung-yun;Kim, Sung-Tae
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.1
    • /
    • pp.9-20
    • /
    • 2019
  • The number of natural disasters in Korea, such as earthquakes, is increasing. As a result, there is growing need for temporary residences or shelters for disaster conditions. The aim of this study was to produce post-disaster refugees housing differentiated from existing shelters using lightweight composite panels. To accomplish this, the structural performance of lightweight composite panels was validated, and an in-plane shear strength test was conducted according to the ASTM E72 criteria among the performance test methods for panels. As a result of the experiment, the maximum load for each specimen under an in-plane shear load was determined. All the experiments ended with the tear of the panel's skin section. The initial stiffness of the specimens was consistent with that predicted by the calculations. On the other hand, local crushing and tearing, as well as the characteristics of the panel, resulted in a decrease in stiffness and final failure. Specimens with an opening showed a difference in stiffness and strength from the basic experiment. The maximum load and the effective area were found to be proportional. Through this process, the allowable shear stress of the specimens was calculated and the average allowable shear stress was determined. The average ultimate shear stress of the lightweight composite panels was found to be $0.047N/mm^2$, which provides a criterion of judgement that could be used to expect the allowable load of lightweight composite panels.

Development of Operation Control and Warning System of Movable Weir for River Safety Management (안전한 하천관리를 위한 가동보 방류제어 및 경보 시스템 개발)

  • Kim, Phil Shik;Kwon, Hyung Joong;Lee, Jae Hyouk;Park, Hyun Jun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.245-245
    • /
    • 2017
  • 하천 시설물은 홍수시 혹은 비상시 운영할 수 있는 경보시스템이나 관리지침 등의 마련이 필수적임에도 불구하고, 현재까지 가동보 시설물에 대한 비상시 운영 메뉴얼 및 경보시스템이 구축되지 못한 실정이다. 4대강 살리기 사업이나 하천정비사업과 같은 대표적인 하천관련 사업에서 단순한 하천 이 치수 목적뿐만 아니라 소수력 발전, 친수공간조성 등의 다목적 활용을 위하여 가동보 설치 사업이 다수 수행되었으며, 현재 국내 하천에 약 1,200여개의 가동보가 설치 운영되고 있다. 이와 같이 다목적 활용을 위하여 가동보의 수요가 급증하는데 반해, 각 설치 현장 상황에 적합한 가동보 운영지침이나 비상경보시스템이 구축되지 못한 실정이며, 적절한 지침 없이 관행적인 가동보 방류로 인한 물놀이 안전사고나 인명피해가 속출하고 있는 실정이다. 2012년 11월에는 하천 제수변 공사를 위해 전주천에 설치한 가동보를 임시적으로 방류하였는데, 하류측의 안전을 확인하지 않고 관행적으로 가동보를 방류하였고, 경보시스템의 부재로 인하여 가동보 하류측 징검다리를 건너는 유치원생들이 급류에 휩쓸리는 사고가 발생하였고, 최근 2014년 5월에는 수원시에 위치한 원천저수지 여수로 둑에 설치된 가로 34m 높이 1.6m 크기의 가동보가 공기압축기의 오작동으로 인하여 보 높이가 낮아지면서 약 30분 원천저수지 하류의 원천리천에 갑자기 무리 불어나 산책로가 침수되고 인근에 산책하던 주민들이 휩쓸려 떠내려가는 사고가 발생하였다. 해외에서도 가동보 운영 미숙으로 인하여 인명사고가 발생하는데, 2008년 11월 호주에서는 하류측 상황 점검이나 경고 방송 없이 가동보를 도복시켜 4살 여아가 급류에 사망하는 사고가 발생하였다. 국외의 경우에는, 상류측 홍수 수위나 하류측 역류 수위를 조절하기 위하여 가동보의 높이를 제어하는 시스템을 구비하고 있지만 이러한 시스템 역시 단순한 수위조절 기능으로서 가동보의 방류량을 제어하지 못하는 실정이다. 가동보를 운영하기 위한 조작시스템은 국내의 경우, 조작실의 조작판넬을 이용하여 가동보의 기립/도복 조작이나 원격 조작 기능과 같은 단순기능만을 구비하고 있어 가동보 방류시 하류측의 범람 피해를 야기하고 있다. 본 연구에서는 가동보 방류에 의한 하류측 범람 피해를 최소화하기 위하여 (1)가동보 도복에 의한 방류량 산정 알고리즘을 개발하고, (2) 방류량에 따른 하류측 수위상승 범위 예측 기법을 개발하고, (3) 가동보 도복 속도를 제어하는 방류량 제어시스템을 개발하고, (4) 가동보 방류에 의한 비상경보시스템을 개발하였다.

  • PDF

Full mouth rehabilitation in osteoporosis patient with loss of teeth and excessive wear (치아 상실과 심한 마모를 보이는 골다공증 환자에서의 완전구강 회복 증례)

  • Kim, Hyun-Tack;Kim, Myung-Joo;Lim, Young-Jun;Kwon, Ho-Beom
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.60 no.1
    • /
    • pp.63-70
    • /
    • 2022
  • Teeth wear with loss of posterior support often leads to symptoms such as irregular occlusal plane and excessive wear of anterior teeth. In such environment, establishing proper posterior support and harmonious anterior guidance and occlusal plane is recommended. In this case, the patient had excessively worn dentition with loss of posterior support, while denying surgical treatment due to her(his) history of osteoporosis, ibandronate injection, and risk of medication-related osteonecrosis of the jaw (MRONJ). To recover the vertical space needed for prosthetic restoration, full mouth rehabilitation with vertical dimension increase of remaining teeth was decided. Missing teeth in the posterior area were restored with mandibular removable partial denture. The treatment plan was determined through careful diagnosis, and every step of procedures including tooth preparation, provisional phase with the increased vertical dimension, and definitive prosthetic phase were carried out accordingly. Once the treatment was completed, the patient was satisfied functionally and esthetically. Periodic examination of oral hygiene, occlusal stability was conducted.

Prosthetic rehabilitation in a Class III malocclusion patient with increasing occlusal vertical dimension (3급 부정교합 환자의 교합수직고경 증가를 동반한 보철 수복)

  • Ha-Eun Choi;Han-Sol Song;Kyung-Ho Ko;Yoon-Hyuk Huh;Chan-Jin Park;Lee-Ra Cho
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.39 no.3
    • /
    • pp.133-145
    • /
    • 2023
  • Class III malocclusion with mandibular protrusion can be divided into skeletal and pseudo malocclusion due to tooth displacement. For skeletal malocclusion, favorable treatment results can be obtained by establishing an appropriate vertical and horizontal intermaxillary relationship in order to secure a restoration space and obtain aesthetic and functional results. In this case, complete mouth rehabilitation was performed using an implant and a fixed prosthesis in a patient with mandibular protrusion and anterior teeth wear and reduced occlusal vertical dimension. After cast analysis and digital diagnosis, a provisional restoration with increased vertical dimension was fabricated to secure posterior support and evaluate stable centric occlusion. With the definitive prosthesis reflecting the provisional restoration, favorable function and aesthetics were obtained.

Investigation of Measurement Feasibility of Large-size Wastes Based on Unmanned Aerial System (UAS 기반 대형 폐기물 발생량 측정 가능성 모색)

  • Son, Seung Woo;Yu, Jae Jin;Jeon, Hyung Jin;Lim, Seong Ha;Kang, Young Eun;Yoon, Jeong Ho
    • Korean Journal of Remote Sensing
    • /
    • v.33 no.5_3
    • /
    • pp.809-820
    • /
    • 2017
  • Efficient management of large-size wastes generated from disasters etc. is always in demand. Large-size wastes are closely connected to the environment, producing adverse effects on the air quality, water quality, living environment and so on. When large-size wastes are generated, we must be able to estimate the generated amount in order to transfer them to a temporary trans-shipment site, or to properly treat them. Currently, we estimate the amount of generated large-size wastes by using satellite images or unit measure for wastes; however, the accuracy of such estimations have been constantly questioned. Therefore, the present study was performed to establish three-dimensional spatial information based on UAS, to measure the amount of waste, and to evaluate the accuracy of the measurement. A measurement was made at a waste site by using UAS, and the X, Y, Z RMSE values of the three-dimensional spatial information were found to be 0.022 m, 0.023 m, and 0.14 m, all of which show relatively high accuracy. The amount of waste measured using these values was computed to be approximately $4,273,400m^3$. In addition, the amount of waste at the same site was measured by using Terrestrial LiDAR, which is used for the precise measurement of geographical features, cultural properties and the like. The resulting value was $4,274,188m^3$, which is not significantly different from the amount of waste computed by using UAS. Thus, the possibility of measuring the amount of waste using UAS was confirmed, and UAS-based measurement is believed to be useful for environmental control with respect to disaster wastes, large-size wastes, and the like.

Militarization and Weaponization of Outer Space in International Law

  • Kim, Han-Taek
    • The Korean Journal of Air & Space Law and Policy
    • /
    • v.33 no.1
    • /
    • pp.261-284
    • /
    • 2018
  • The current international legal system does not provide a safeguard against the militarization and the weaponization of outer space. Although the term "peaceful use of outer space" in the 1967 Outer Space Treaty(OST) appears in official government statements or in multilateral space treaties, it is still without an authoritative definition in reviewing national practices. The ambiguous ban on weapons in Article IV of the OST allows countries to loophole on the deployment of other weapons other than nuclear weapons. Meanwhile "Draft Treaty on the Prevention of the Placement of Weapon in Outer Space and of the Threat or Use of Force against Outer Space Objects(PPWT)" to Conference on Disarmament (CD) commissioned by the UN General Assembly's Special Session jointly submitted by China and Russia in 2008 and later revised in 2014, attempting to define and prohibit the proliferation of weapons in outer space and provided definitions of prohibited weapons, are opposed by the US on the grounds that currently there is no arms race in outer space. Some experts support a hard law approach in which binding laws aimed at ultimately creating integrated and binding legal instruments in all aspects of the use of outer space should be adopted to regulate the military use of space. However as a temporary measure the soft law guidelines should be developed for the non liquiet, a situation where there is no applicable law. The soft law could be used to create support for the declaration of the treaties and to create international customary law. For example, the 1963 Declaration of Legal Principles Governing the Activities of States in the Exploration and Use of Outer Space that regulates the activities of the state in the exploration and use of the universe, and the 1992 Principles Relevant to the Use of Nuclear Power Sources in Outer Space will illustrated. While substantial portions of the former was codified later in the 1967 OST, the latter which, although written in somewhat mandatory terms, have been consistently complied with by states, have arguably become part of customary international law. On November 12, 1974, the General Assembly reaffirmed that the development of international law may be reflected inter alia, by declarations and resolutions of the General Assembly which may to that extent be taken into consideration by the International Court of Justice.