• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.116-126
• /
• 2013

Glycol ethers are a group of solvents based on alkyl ethers of ethylene glycol commonly used in paints. These solvents typically have a higher boiling point, together with the favorable solvent properties of lower-molecular weight ethers and alcohols. The word "Glycol ethers" was registered as a United States trademark by Union Carbide Corp. Typically, glycol ethers are found in pharmaceuticals, sunscreens, cosmetics, inks, dyes and water based paints. On the other hand, glycol ethers are used in degreasers, cleaners, aerosol paints and adhesives. Most glycol ethers are relatively water soluble, biodegradable and only a few are considered toxic. Therefore, they are unlikely to pose an adverse risk to the environment. Recent study suggests that occupational exposure to glycol ethers is related to low motile sperm count in men, but the finding has been disputed by others. In this study, skin permeation of 3 types glycol ethers were studied in vitro using matrix such as solvent and detergent. The absorption of glycol ethers[methyl glycol ethers(MC), ethyl glycol ethers(EC) and butyl glycol ethers(BC)] has been measured in vitro through rat skin. Epidermal membranes were set up in Franz diffusion cells and their permeability to PBS measured to establish the integrity of the skin before the glycol ethers were applied to the epidermal surface. Absorption rates for each glycol ethers were determined and permeability assessment made to quantify any irreversible alterations in barrier function due to contact with the esters. Types of glycol ethers in vitro experimental results on MC> EC> BC quickly appeared in the following order: skin permeation was beneficial to the skin permeation small molecular weight, the difference in chemical structure, such as hydrophilic, because with the partition coefficient and solubility mechanisms and passive diffusion to increase the speed at which transmission is considered.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.3 no.2
• /
• pp.54-58
• /
• 2010

Purpose: In patients with chronic cervical pain, the facet joint is the source of the majority. Due to the difficulty of identifying the exact location of the joint that causes these symptoms, the possibility of complications and the placebo effect brings clinical application into question. In this study, we assessed the prevalence of patients with chronic cervical pain and report the diagnostic and therapeutic usefulness of ultrasonography - guided facet joint block therapy. Materials and Methods: Patients with nonspecific chronic cervical pain for more than 6 months were selected. Patients with disc herniation, sciatica-related pain were excluded from the study and 160 patients who failed in conservative treatment (physical therapy, chiropractic therapy, medication) were included in the study. Diagnostic Ultrasonography-guided facet joint block was performed with 1% lidocaine, and after two weeks, Bupivacaine 0.25% was used in patients who tested positive for lidocaine. Patients with more than 75% pain reduction during movement after facet joint block were considered positive. Results: Among the 160 patients with chronic cervical pain, 96 patients(60%) had a positive reaction after facet block using lidocaine. Among the 64 patients with a negative reaction to lidocaine, 48 patients(75%) had a positive reaction to bupivacaine. There were 48 false positive patients(50%) who showed a positive reaction to lidocaine but a negative reaction to bupivacaine. The mean VAS of the total 160 patients before blocks was 8.5, after 2 weeks follow up it decreased to 2.7 (p = 0.001) and after 4weeks 3.6 (p = 0.001). The 8 patients as an initial improvement of symptoms are not satisfied with the procedure and the 3 patients had been worsened during observation, were showed pain relief after additional ultrasonography-guided facet joint block at 4th week. Conclusion: A single ultrasonography-guided block to chronic cervical pain patients has relatively low diagnostic value since high false positive rate. The twice facet joint blocks is thought to be a useful method for interventional pain management of patients with chronic cervical pain.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.125-135
• /
• 2009

Statement of problem: Loosening or fracture of the abutment screw is one of the common problems related to the dental implant. Generally, in order to make the screw joint stable, the preload generated by tightening torque needs to be increased within the elastic limit of the screw. However, additional tensile forces can produce the plastic deformation of abutment screw when functional loads are superimposed on preload stresses, and they can elicit loosening or fracture of the abutment screw. Therefore, it is necessary to find the optimum tightening torque that maximizes a fatigue life and simultaneously offer a reasonable degree of protection against loosening. Purpose: The purpose of this study was to present the influence of tightening torque on the implant-abutment screw joint stability with the 3 dimensional finite element analysis. Material and methods: In this study, the finite element model of the implant system with external butt joint connection was designed and verified by comparison with additional theoretical and experimental results. Four different amount of tightening torques(10, 20, 30 and 40 Ncm) and the external loading(250 N, $30^{\circ}$) were applied to the model, and the equivalent stress distributions and the gap distances were calculated according to each tightening torque and the result was analyzed. Results: Within the limitation of this study, the following results were drawn; 1) There was the proportional relation between the tightening torque and the preload. 2) In case of applying only the tightening torque, the maximum stress was found at the screw neck. 3) The maximum stress was also shown at the screw neck under the external loading condition. However in case of applying 10 Ncm tightening torque, it was found at the undersurface of the screw head. 4) The joint opening was observed under the external loading in case of applying 10 Ncm and 20 Ncm of tightening torque. 5) When the tightening torque was applied at 40 Ncm, under the external loading the maximum stress exceeded the allowable stress value of the titanium alloy. Conclusion: Implant abutment screw must have a proper tightening torque that will be able to maintain joint stability of fixture and abutment.

• 한국노년학
• /
• v.38 no.3
• /
• pp.551-567
• /
• 2018

Demographic and socio-structural information is useful to identify potential welfare recipients who are in need of disease-prevention and intervention services. Thus, the present study aims to explore the differences in grip strength among middle and old-aged adults by living conditions and by living area. The 5th wave data of Korean Longitudinal Study of Aging was utilized. The dependent variable was grip strength, and the independent variables were living alone (living alone or not) and living area (city or non-city). Covariates were age, education, log-transformed household income, spouse existence, body mass index, self-rated health conditions, depressive symptoms, cognitive function, smoking, regular exercise, frequency of meeting with friends, and the number of social participation. Regression analysis was performed for middle-aged men, middle-aged women, old-aged men, and old-aged women, respectively. ANOVA and Chi-test were additionally used to specifically discuss significant results. Cross-sectional weight was applied to all analyses. According to the results, living alone and living area did not have significant effects on grip strength among middle-aged men, old-aged men, and old-aged women. In middle-aged women, however, living alone and living area were significantly associated with grip strength. To be specific, middle-aged women who lived alone in rural areas had the lowest grip strength compared to other middle-aged women. Additional analysis showed that middle-aged women who lived alone in rural areas had risk factors, such as low education level, low income, or high depressive symptoms. It implies that middle-aged women living alone in rural areas may have physical health risks, so they might be in need of disease prevention. This study is meaningful in that it can provide reliable information on the latent welfare recipients by using representative panel data and applying weight values.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.2
• /
• pp.169-177
• /
• 2020

Purpose: To assess the effectiveness of mixed grafts in lumbar posterolateral fusion (PLF) by comparing the bone union rates of an autobone with a bone substitute mixed graft. Materials and Methods: The patients were followed-up for at least two years after PLF and divided into four groups according to the mixed graft retrospectively. Group I was 48 cases using a femoral head allobone. Group II was 38 cases using β-tricalcium phosphate. Group III was 92 cases using biphasic calcium phosphate. Group IV was 38 cases using biphasic calcium phosphate and autologous bone marrow. Union was evaluated by the work up simple radiographs after two years from PLF. Union was defined if the radiographs demonstrated a bilateral continuity in the fusion mass between the cephalad and caudal transverse processes with less than 2° of angular motion and no translation between the vertebrae at the level of fusion on the lateral flexion-extension radiographs. Results: According to simple radiographs after two years from PLF, the rate of union was highest in Group IV using local autobone, biphasic calcium phosphate and autologous bone marrow mixed graft. Conclusion: Biphasic calcium phosphate is an osteoconductive bone substitute that increases the bio-absorbability and mechanical strength. Autologous bone marrow has osteoinductive and osteogenic properties. These features can increase the rate of bone union. Therefore, a local autobone, biphasic calcium phosphate and autologous bone marrow mixed graft can be considered an effective bone graft substitute for lumbar PLF instead of an autobone graft.

• Journal of the Korean Orthopaedic Association
• /
• v.52 no.1
• /
• pp.33-39
• /
• 2017

Purpose: Surgical risks associated with the resection of osteochondroma around the proximal tibia and fibula, as well as the proximal humerus have been well established; however, the clinical presentation and optimal surgical approach for osteochondroma around the lesser trochanter have not been fully addressed. Materials and Methods: Thirteen patients with osteochondroma around the lesser trochanter underwent resection. We described the chief complaint, duration of symptom, location of the tumor, mass protrusion pattern on axial computed tomography image, tumor volume, surgical approach, iliopsoas tendon integrity after resection, and complication according to the each surgical approach. Results: Pain on walking or exercise was the chief complaint in 7 patients, and numbness and radiating pain in 6 patients. The average duration of symptom was 19 months (2-72 months). The surgical approach for 5 tumors that protruded postero-laterally was postero-lateral (n=3), anterior (n=1), and medial (n=1). All 4 patients with antero-medially protruding tumor underwent the anterior approach. Two patients with both antero-medially and postero-laterally protruding tumor received the medial and anterior approach, respectively. Two patients who underwent medial approach for postero-laterally protruded tumor showed extensive cortical defect after resection. One patient who received the anterior approach to resect a large postero-laterally protruded tumor developed complete sciatic nerve palsy, which was recovered 6 months after re-exploration. Conclusion: For large osteochondromas with posterior protrusion, we should not underestimate the probability of sciatic nerve compression. When regarding the optimal surgical approach, the medial one is best suitable for small tumors, while the anterior approach is good for antero-medial or femur neck tumor. For postero-laterally protruded large tumors, posterior approach may minimize the risk of sciatic nerve palsy.

• Journal of the Korean Society of Radiology
• /
• v.18 no.1
• /
• pp.45-52
• /
• 2024

In this study, an AI-based algorithm was developed to prevent image quality deterioration and reading errors due to patient movement in PET/CT examinations that use radioisotopes in medical institutions to test cancer and other diseases. Using the Mothion Free software developed using, we checked the degree of correction of movement due to breathing, evaluated its usefulness, and conducted a study for clinical application. The experimental method was to use an RPM Phantom to inject the radioisotope 18F-FDG into a vacuum vial and a sphere of a NEMA IEC body Phantom of different sizes, and to produce images by directing the movement of the radioisotope into a moving lesion during respiration. The vacuum vial had different degrees of movement at different positions, and the spheres of the NEMA IEC body Phantom of different sizes produced different sizes of lesions. Through the acquired images, the lesion volume, maximum SUV, and average SUV were each measured to quantitatively evaluate the degree of motion correction by Motion Free. The average SUV of vacuum vial A, with a large degree of movement, was reduced by 23.36 %, and the error rate of vacuum vial B, with a small degree of movement, was reduced by 29.3 %. The average SUV error rate at the sphere 37mm and 22mm of the NEMA IEC body Phantom was reduced by 29.3 % and 26.51 %, respectively. The average error rate of the four measurements from which the error rate was calculated decreased by 30.03 %, indicating a more accurate average SUV value. In this study, only two-dimensional movements could be produced, so in order to obtain more accurate data, a Phantom that can embody the actual breathing movement of the human body was used, and if the diversity of the range of movement was configured, a more accurate evaluation of usability could be made.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.313-320
• /
• 2014

Purpose : The purpose of the study is to evaluate the efficiency of Coaxial MLC VMAT plan (Using $273^{\circ}$ and $350^{\circ}$ collimator angle) That the leaf motion direction aligned with axis of OAR (Organ at risk, It means spinal cord or cauda equine in this study.) compare to Universal MLC VMAT plan (using $30^{\circ}$ and $330^{\circ}$ collimator angle) for spine SBRT. Materials and Methods : The 10 cases of spine SBRT that treated with VMAT planned by Coaxial MLC and Varian TBX were enrolled. Those cases were planned by Eclipse (Ver. 10.0.42, Varian, USA), PRO3 (Progressive Resolution Optimizer 10.0.28) and AAA (Anisotropic Analytic Algorithm Ver. 10.0.28) with coplanar $360^{\circ}$ arcs and 10MV FFF (Flattening filter free). Each arc has $273^{\circ}$ and $350^{\circ}$ collimator angle, respectively. The Universal MLC VMAT plans are based on existing treatment plans. Those plans have the same parameters of existing treatment plans but collimator angle. To minimize the dose difference that shows up randomly on optimizing, all plans were optimized and calculated twice respectively. The calculation grid is 0.2 cm and all plans were normalized to the target V100%=90%. The indexes of evaluation are V10Gy, D0.03cc, Dmean of OAR (Organ at risk, It means spinal cord or cauda equine in this study.), H.I (Homogeneity index) of the target and total MU. All Coaxial VMAT plans were verified by gamma test with Mapcheck2 (Sun Nuclear Co., USA), Mapphan (Sun Nuclear Co., USA) and SNC patient (Sun Nuclear Co., USA Ver 6.1.2.18513). Results : The difference between the coaxial and the universal VMAT plans are follow. The coaxial VMAT plan is better in the V10Gy of OAR, Up to 4.1%, at least 0.4%, the average difference was 1.9% and In the D0.03cc of OAR, Up to 83.6 cGy, at least 2.2 cGy, the average difference was 33.3 cGy. In Dmean, Up to 34.8 cGy, at least -13.0 cGy, the average difference was 9.6 cGy that say the coaxial VMAT plans are better except few cases. H.I difference Up to 0.04, at least 0.01, the average difference was 0.02 and the difference of average total MU is 74.1 MU. The coaxial MLC VMAT plan is average 74.1 MU lesser then another. All IMRT verification gamma test results for the coaxial MLC VMAT plan passed over 90.0% at 1mm / 2%. Conclusion : Coaxial MLC VMAT treatment plan appeared to be favorable in most cases than the Universal MLC VMAT treatment planning. It is efficient in lowering the dose of the OAR V10Gy especially. As a result, the Coaxial MLC VMAT plan could be better than the Universal MLC VMAT plan in same MU.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.3
• /
• pp.297-310
• /
• 2013

This study was performed to investigate relationships among night eating and nutrient intakes status in university students. A total of 271 subjects (male=155, female=116) were divided by using 3-days food record method according to the percentage of energy from night eating: non-night eating, <25% night-eating and ${\geq}25$ night-eating group. There were no significant differences in age, height, weight, percent body fat and BMI among the groups. The proportion of morning anorexia and insomnia was below 2% and 10%, and no differences were observed among the groups by percentage of energy from night eating. In the male subjects, the intakes of energy in the '${\geq}25$ night-eating group' was significantly higher than those of the other groups; whereas, the nutrient density (ND, nutrient intakes per 1,000 kcal) and INQ (index of nutritional quality) of vitamin $B_1$, vitamin $B_2$, vitamin C, calcium and iron in the '${\geq}25$ night-eating group' was significantly lower than those of the other groups. In the female subjects, the intakes of energy in the '<25 night-eating group' was significantly higher than that of the 'non-night eating group'. And the ND and INQ of vitamin C in the '<25 night-eating group' was significantly higher than those of the 'non-night eating group'. In addition, within the male subjects, the INQ of vitamin $B_1$, vitamin $B_2$, vitamin C, calcium and phosphorous showed significantly negative correlations with food intakes, energy intakes and percentages of energy from night eating after the values were adjusted for age. These results suggest that among male university students, night snack intakes above 25% of energy have lower micronutrient qualities of vitamin $B_1$, vitamin $B_2$, vitamin C and calcium.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.108-118
• /
• 2009

Statement of problem: Volume stability, microstructure reproducibility and fluidity along with compatibility with dental stone must be in consideration in order to use tissue conditioner as a material for functional impression. There are few studies concerning the influence of time factor in oral condition on surface roughness of the stone and optimal retention period in the oral cavity considering such changes in surface roughness. Purpose: The purpose of this study was to find out the influence of various kinds of tissue conditioner, its powder/liquid ratio and immersion time on surface roughness of the stone. Material and methods: Materials used in this study were the three kinds of tissue conditioners(Coe-Comfort, Visco-Gel, Soft-Liner) and were grouped into three: group R-mixed with standard powder/liquid ratio that was recommended by the manufacturers, group M-mixed with 20% more powder, group L-mixed with 20% less powder. Specimens were made with the size of 20 mm diameter and 2 mm width. Each tissue conditioner specimens were subdivided into 5 groups according to the immersion time(0 hour, 1 day, 3 days, 5 days, 7 days), completely immersed into artificial saliva and were stored under $37^{\circ}C$. Specimens of which the given immersion time elapsed were taken out and were poured with improved stone, making the stone specimens. Surface roughness of the stone specimens was measured by a profilometer. Results: Within the limitation of this study, the following results were drawn. 1. Major influencing factor on surface roughness of the stone model made from tissue conditioner was the retention period(contribution ratio($\rho$)=62.86%, P<.05) of the tissue conditioner in oral cavity to make functional impression. 2. In case of Coe-Comfort, higher mean surface roughness value of the stone model with statistical significance was observed compared to that of Soft-Liner and Visco-Gel as immersion time changes(P<.05). 3. In case of group L(less), higher mean surface roughness value of the stone model with statistical significance was observed compared to that of R(recommended) and M(more) group as immersion time changes(P<.05). Conclusion: We may conclude that as the retention period of time in oral cavity influences surface roughness of the stone model the most and as the kind of tissue conditioner and its P/L ratio may influence also, clinician should well understand the optimal retention period in oral cavity and choose the right tissue conditioner for the functional impression, thus making the functional impression with tissue conditioner usefully.