• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.1
• /
• pp.54-62
• /
• 2017

For the Earth observation satellite for ISR mission, a satellite constellation can be utilized to observe a specific area periodically and ultimately increase the effectiveness of the mission. The Walker-Delta method was applied to design constellation orbits with four satellites, which could detect abnormal activities in AoI(Area of Interest). To evaluate the effectiveness of the mission, a revisiting time was selected as a key requirement. This paper presents the mission analysis process for four SAR satellites constellation as well as the result of constellation configuration design to meet the requirements. Figure of Merits analysis was performed based on algorithm developed. Finally, it was confirmed that the constellation orbit with four different orbital planes is likely to be appropriate for ISR mission.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.5
• /
• pp.404-414
• /
• 2013

In the conceptual design phase of jet fighters, the trade study is performed repeatedly for a selection of the baseline configuration. The automation of repeated trade study makes possible to select efficiently the baseline configuration. In this study, the performance analysis code was developed for the automation of trade study. The code was consists of the module of shape generation, the module of weight estimation, the module of mission performance analysis. 3D CAD Model can be generated by the module of shape generation and Weight can be estimated by using the empirical equation in the module of weight estimation. The module of mission performance analysis was able to calculate the mission performance about the arbitrary mission profile. In addition, the optimal mission performance can be calculated by using optimization method. By performing the validation, the code was confirmed to be able to apply to the conceptual design phase.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.49-57
• /
• 2020

The KC-100 has completed civil type certification with the Ministry of Land, Infrastructure, and Transport, and is currently under development as an unmanned aerial vehicle as part of the Ministry of Land, Infrastructure, and Transport. The Certification Technology of small Unmanned Airplane system (CTsUA system), which is an unmanned KC-100, is being developed to enable the installation of heavy-duty mission equipment and long-time flight missions. This study investigated the process and results of analyzing various parameters such as aircraft weight, airspeed, flight altitude, required horsepower, and fuel consumption at each stage to construct a mission profile based on the operational concept of the CTsUA system. To maintain a maximum take-off weight of 3,600 lbs (1,633 kg), the analysis determined that the weight of the application equipment for the unmanned system should be kept below 80 lbs (36 kg).

• Journal of the Korean Society of Systems Engineering
• /
• v.1 no.1
• /
• pp.67-72
• /
• 2005

Design and optimization study has been performed to obtain a supersonic air.launching mission for the nanosat launcher. Given mission is to launch 10kg payload to target orbit of $700km{\times}700km$. Additional design constraints are imposed by the mother plane. After the required velocity is obtained, the stag ing optimization is carried out. Serial analyses for the propulsion system and aerodynamics are performed then, the rocket trajectory optimization has been carried out. After several mission design and optimization iterations, the optimized mission which satisfies the mission target is obtained. Total weight of the three-staged air-launching rocket is 1231.4kg and the payload weight is 10 kg.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.629-634
• /
• 2011

A prestudy on expendable turbine engine for high-speed vehicle was conducted. The two possible mission profiles were established to decide the engine requirements and Design Point, and Design Point analysis was performed with the values of design parameter which were obtained from similar class engines and technical references. The results showed that Specific Net Thrust is 2599.4 ft/s and Specific Fuel Consumption is 1.483 lb/($lb^*h$) at the flight condition of Sea Level, Mach 1.2. It was also found through the performance analysis on the two possible mission profiles that major design parameters for determining Net Thrust were Turbine Inlet Temperature for low supersonic flight speed and Compressor Exit Temperature for high supersonic flight speed. In addition, simple turbojet engine with axial compressor, straight annular combustor, axial turbine and fixed throat area converge-diverge exhaust nozzle was proposed as the configuration of simple low cost light engine.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.97-102
• /
• 2013

A prestudy on expendable turbine engine for high-speed vehicle was conducted. After two possible mission profiles were established to decide the engine requirements, design point analysis was performed with the values of design parameter which were obtained from similar class engines, references, etc. The results showed that specific net thrust and specific fuel consumption with turbine inlet temperature of 3,600 R are 2,599.4 ft/s and 1.483 lb/(lb*h) respectively at the flight condition of sea level, Mach 1.2. It was also found that major design parameters for determining maximum net thrust were turbine inlet temperature for low supersonic and transonic flight speed and compressor exit temperature for high supersonic flight speed from the results of performance analysis on the two possible mission profiles. In addition, simple turbojet engine with an axial compressor, a straight annular combustor, an one stage axial turbine and a fixed throat area converge-diverge exhaust nozzle was proposed as the configuration of simple low cost lightweight turbine engine.

• Journal of Aerospace System Engineering
• /
• v.15 no.1
• /
• pp.40-46
• /
• 2021

In this study, an aerodynamic configuration design and study on performance enhancement of a tilt-rotor UAV were conducted for improving mission capabilities compared to multi-copter type UAV, MC-1/2/3 developed for disaster and policing operation. To improve performance, a new TR5X configuration was developed by modifying the fuselage and tail shape of TR60 UAV and additionally attaching an extended wing to the nacelle. Aerodynamic performances of TR60 and TR5X were compared through computational fluid dynamics (CFD) analysis. In addition, flight performance analysis of full aircraft was conducted. Results showed that main performance requirements of TR5X were satisfied.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.1-4
• /
• 2016

항공기 사이징은 항공기 설계에서 설계 및 임무 요구조건을 만족하기 위한 항공기의 무게를 계산하는 과정이다. 사이징 프로그램은 엔지니어가 기본적인 파라미터만 입력하면 내장된 코드에 의하여 자동적으로 사이징 과정을 수행하여 주는 프로그램을 말한다. 본 연구에서는 개발된 프로그램의 프로세스, 프로그램 구성을 설명하고 실행 예를 통하여 사용자가 편리하고 직관적으로 활용할 수 있는 사이징 프로그램을 개발하였다. 개발 된 프로그램은 사이징 과정에서 편리한 임무작성, 입력된 임무에 따른 임무형상 도시, 그리고 사이징 및 임무해석결과를 한눈에 확인할 수 있는 것이 특징이다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10a
• /
• pp.454-456
• /
• 2000

다른 여느 분야의 소프트웨어 개발 분야보다도 형상관리의 필요성의 나타나는 분야로 위성탑재 소프트웨어 분야를 꼽을 수 있는데 이는 위성소프트웨어의 기본적인 특성에 기인한다고 볼 수 있다. 위성 탑재 소프트웨어는 여느 소프트웨어보다도 그 신뢰성을 중시하고 있으며 이러한 신뢰성은 개발 과정상의 잘 정의되어진 형상관리에 있다. 본 논문에서는 아리랑 위성 탑재 소프트웨어 개발에 과정에서의 형상관리 방법 및 절차를 기술하였으며 이러한 형상관리하에 아리랑 위성 탑재 소프트웨어는 개발되고 위성에 탑재되어 그 임무를 훌륭히 수행하고 있다. 이 논문을 통해서 고도의 신뢰성을 요구하는 소프트웨어 개발에 있어서의 형상관리 방법에 도움이 되고자 한다.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.40.2-40.2
• /
• 2009

이 연구에서는 달천이(TLI: Trans Lunar Injection) 및 달포획(LOI: Lunar Orbit Injection) 기동 시 대전 지상국의 가시성을 고려한 최적의 임무를 설계하였다. TLI 기동은 탐사선이 지구 주차궤도에서 지구-달 천이궤적으로 진입하기 위하여 주어지는 기동이며, LOI 기동은 탐사선이 지구-달 천이궤적에서 달의 중력권으로 진입하기 위하여 주어지는 기동이다. TLI 및 LOI 기동 시 대전 지상국에서의 가시성의 확보는 실제적인 미래 한국의 달 탐사를 대비하였을 때 중요한 요소이다. 따라서 이 연구에서는 TLI 및 LOI 기동 시 대전 지상국에서의 가시성을 모두 고려하여, 최소연료로 지구 주차궤도에서 달 임무궤도 진입까지의 모든 단계에 대해 임무설계를 실시하였다. TLI 및 LOI 기동 시 추력은 순간 추력(Impulsive thrust)로 가정하였으며, KSLV-II 발사체의 성능을 적용하여 설계하였다. 임무 설계 시 태양, 지구, 달의 섭동력을 고려한 N체 운동 방정식을 탐사선에 적용하였으며, 지구의 비대칭 중력장, 태양 복사압, 달의 J2 섭동에 의한 영향도 고려하였다. JPL의 정밀 천체력인 DE405를 사용하였고, 상용 소프트웨어인 SNOPT(Spares Nonlinear OPTimizer)를 이용하여 비행 궤적의 최적해를 도출하였다. 임무 설계 결과를 통해, 대전 지상국의 가시성을 고려한 TLI 및 LOI 기동의 크기에 의한 임무설계의 분석을 수행하였다. 또한 최적화된 달 탐사 임무의 단계별 기동의 크기와 지구-달 천이 궤적의 형상 및 다양한 임무 요소들의 해석을 도출하였다.