• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.181-190
• /
• 2014

The optimized flight path planning which is appropriate for UAV operation with high performance and multiplex sensors is required for efficient ISR missions. Furthermore, a mission visualization tool is necessary for the assessment of MoE(Measures of Effectiveness) prior to mission operation and the urgent tactical decision in peace time and wartime. A mission visualization and analysis tool was developed by combining STK and MATLAB, whose tool was used for UAV ISR mission analyses in this study. In this mission analysis tool, obstacle avoidance and FoM(Figure of Merit) analysis algorithms were applied to enable the optimized mission planning.

• Satellite Communications and Space Industry
• /
• v.12 no.1 s.27
• /
• pp.115-121
• /
• 2004

본 연구의 목적은 2008년 발사를 목표로 개발 중인 통신해양기상위성(COMS: Communication, Ocean and Meteorological Satellite) 1호의 해양/기상 임무를 수행을 지원할 지상 시스템의 개념 설계를 수행하는 것이다. 송수신 시스템 개발을 위한 사용자 요구사항 분석과 외국 정지궤도의 위성의 영상 전 처리 시스템에 대한 기법 분석이 이루어 졌으며, 이를 바탕으로 통신해양기상위성 송수신 시스템의 데이터 흐름도를 작성하였다. 통해기 지상 시스템은 신뢰성 있는 위성 운영과 자료처리 기술의 자립화를 위해 국내 기술로 자체 개발될 예정이다.

• The KIPS Transactions:PartA
• /
• v.16A no.4
• /
• pp.235-244
• /
• 2009

The mission-critical computer for air defense has to maintain its operation without any fault for a long mission time and is required to implement at low cost. Now the reliability of the mission critical-computer using Active Sparing Redundancy fault-tolerant technique is inferior to that of the computer using TMR technique. So in this paper are proposed Extended ASR(EASR) technique that provides higher reliability than that of the computer using TMR technique. The fault-tolerant performance of the implemented mission-critical computer is proven through reliability analysis and numbers of fault recovery test. Also, the reliability of the mission-critical computer using EASR technique is compared with those of computer using ASR and TMR techniques. EASR technique is very suitable to the mission-critical computer.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.117-127
• /
• 2002

In this paper, structure design of the payload section of the KSR-III was performed. The payload section of the KSR-III, which corresponds to the second stage, consists of the Scientific Payload Section for the mission of the rocket, the Payload Section (Electronics) for the communication between the rocket and the ground station, and the Payload Section (Attitude Control) for the attitude control of the rocket. In order to accomplish the mission, every payload and component should operate successfully during the mission period and the structure must satisfy the requirements of the payloads. In this research, precise composition of the payload section and payloads arrangement of the KSR-III were performed. And the modification of the structure to meet the requirements were described.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1216-1221
• /
• 2008

A low earth orbit satellite with a fixed solar array always has a sun-pointing attitude during daylight, and changes into a nadir-pointing attitude for a imaging mission. Since external heating sources to the satellite panels are Earth　irradiation and Albedo during most of daylight in a sun-pointing attitude, the thermal environment condition is relatively stable. However, direct sunlight which is the greatest environmental heating has an affect on the satellite panels during a mission period (10% of one orbit) in a nadir-pointing attitude. In satellite thermal design, thermal effects of a nadir-pointing mission attitude due to this thermal environment change need to be evaluated although the duration of a nadir-pointing attitude is short. Therefore, a nadir-pointing attitude during a mission is incorporated into thermal model and by the thermal analysis result, thermal effects on the satellite are investigated.

• Journal of Space Technology and Applications
• /
• v.3 no.2
• /
• pp.101-117
• /
• 2023

Active debris removal, a technology that approaches and removes space debris in orbit, and the on-orbit service, a technology for extending the mission life of satellites by fuel charging or by exchanging the battery, are gaining interest with the growth of the space community. SaTReC plans to develop a satellite capable of capturing and removing Korean satellites orbiting in space after the end of their missions. In contrast to the previously launched satellites by Korea, which were mainly intended to observe Earth and the space environment, rendezvous/docking technologies, as required in the future during, for instance, space exploration missions, will be implemented and demonstrated. In this paper, an orbital transition method for next-generation small satellites that will capture and remove space debris will be introduced. It is assumed that a small satellite with a mass of approximately 200 kg will be injected into the mission orbit through Korea Space Launch Vehicle-II in 2027. Because the satellite must access the target using a minimum amount of fuel, an approaching technology using Earth's J2 perturbation force has been developed. This method is expected to enable space debris removal missions for relatively lightweight satellites and to serve as the basis for carrying out a new type of space exploration in what is termed the 'Newspace' era.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.31-38
• /
• 2005

Conceptual design of an Aerostat was completed. Configuration was determined based on wind tunnel test results of aeostat hulls to have longitudinal static stability. Hull surface area and volume were obtained by using of Cubic spline method for given configuration and length. Final length of a hull was determined by iteration process. Cable tension and payload were estimated for conceptual design. A parametric study was performed for various weight and misson altitude. As results, a 30m class aerostat was designed and described.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.40
• /
• pp.69-79
• /
• 1996

하드웨어 설계 과정에서 신뢰성 담당자들에게 당면한 문제는 요구된 임무에 필요한 기능적 요구사항의 달성 가능성과 요구된 임무를 달성할 확률의 예측여부 및 이의 적합성을 판단하는 것이다. 첫번째의 문제는 기존의 신뢰성 공학의 방법을 사용하여 해결되지만 두번째의 문제는 잦은 사후 설계 변경을 필요로 하기 때문에 항상 시스템 전체에서의 최적을 고려하여 이루어지지 못하고 있다. 본 논문에서는 그러한 잦은 사후 설계 변경등으로 인한 취약한 점을 극복하기 위한 방법론으로 하드웨어 설계 신뢰성 공학을 다루며 그 분석 도구로서 목표달성 나무(Goal-tree)의 사용과 그 응용을 제시하고자 한다.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.381-385
• /
• 2006

2008년 발사를 목표로 개발되고 있는 통신해양기상위성(COMS: Communication, Ocean and Meteorological Satellite)는 기상 관측과 해양 관측 임무 및 통신 임무까지 수행하는 정지궤도 위성이다. 통신해양기상위성은 크게 탑재체와 지상국으로 나눌 수 있고 지상국은 다시 통신 임무를 위한 CTES(Communication Test Earth Station), 해양/기상 임무를 위한 IDACS(Image Acquisition and Control System), 그리고 위성 관제와 운영을 위한 SGCS(Satellite Ground Control System)로 구분된다. 이 중 IDACS의 서브시스템 중 하나인 LHGS(LRIT/HRIT Generation Subsystem)는 LRIT/HRIT(Low Rate Information Transmission/High Rate Information Transmission)를 생성하고 배포하는 기능을 가지고 있다. 관측 종료 후 LRIT/HRIT 전송 완료까지 15분 이내로 이루어져야 한다는 기상청의 요구사항을 만족하기 위해서 JPEG 압축 시간도 중요한 요소로 고려되어야 한다. 그래서 본 논문에서는 MTSAT에서 받은 LRIT/HRIT의 자료 처리를 바탕으로 lossless JPEG와 lossy JPEG의 압축 시간을 측정하여 압축률을 비교하여 성능 분석을 해보기로 한다. 이렇게 도출해낸 수치자료는 COMS LHGS 설계에 활용할 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.40-50
• /
• 2003

The operational orbit evolution of the KOMPSAT-l over 3 years was analyzed. During LEOP, four orbit maneuvers were performed to obtain the optimized orbit and eight safe-hold modes happened. The effects of unpredictable occurrence of the safe-hold mode and the highest solar activity on the orbit evolution during the mission life were analyzed. The comparison of orbital elements between long-term predicted orbit and determined orbit from observed data was also performed. The operational orbit started from the optimized one was evolved within the boundary of the designed mission orbit except altitude and it was verified the sun-synchronous orbit was successfully maintained.