• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.6
• /
• pp.127-136
• /
• 1998

This paper proposes a new MVQMultistage Vector Quantizer) using a hybrid structure. While in a conventional MVQ, the quantizers of all stages perform the encoding procedure for input signals, we introduce a quantizer that performs selectively. The proposed quantizer with a hybrid structure is composed of a FSVQ(Finite-State Vector Quantizer) for the first stage and a ordinary VQ(Vector Quantizer) for the second stage. A input block is firstly encoded by the FSVQ of the first stage. If the Euclidean distortion measure between original signals and the codevector selected from the state codebook of the FSVQ is less than a prespecified value, only the FSVQ is used for image coding. Otherwise, both the FSVQ of the first stage and the ordinary VQ of the second stage are used for image coding. While the conventional MVQ has an advantage that can achieve low encoding complexity in comparison to the ordinary VQ, but has a disadvantage that is suboptimal with respect to the performance measure and can not achieve the bit rate reduction, the proposed method achieve not only the bit rate reduction but also the performance improvement.

• Elastomers and Composites
• /
• v.39 no.1
• /
• pp.42-50
• /
• 2004

In this work, the diglycidylether of bisphenol A (DGEBA) and modified polyurethane (PU) blends were initiated by N-benzylpyrazinium hexafluoroantimonate (BPH). The cure and fracture toughness of neat DGEBA with the addition of PU were investigated. The cure properties of DGEBA/PU blend system were examined by DSC and near-IR measurements. The fracture touhtness were investigated by measuring the critical stress intensity factor ($K_{IC}$) and the critical strain energy release rate ($G_{IC}$). According to the results, the maximum values of owe activation energy ($E_a$) and conversion (${\alpha}$) were found at 10 phr of PU. Also the $K_{IC}$ showed a similar behavior with the results of conversion. These results were probably due to increase of crosslinking density in the blends resulted from increase of the hydrogen bonding between the hydroxyl groups of DGEBA and isocyanate groups of PU.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 1999.10a
• /
• pp.159-173
• /
• 1999

본 논문은 교차로에 설치된 영상검지기로부터 들어온 교통정보 중 공간교통정보에 해당하는 차량 대기길이를 측정을 하는 방법으로 각 차선(lane)별 검지영역에 대하여 웨이브렛 변형(Wavelet Transforms)을 하여 차량을 검지하고, 검지영역 내에서 차량의 대기길이를 측정하는 알고리즘을 제안한다. 기존의 방법으로는 차량 윤곽선 추출(edge detection)을 이용한 대기길이 측정 방법이나 배경(background)정보를 사전에 입수한 후 임계값 이상의 변화가 있을 때 차량을 검지하여 대기길이를 측정하는 방법 등이 연구되어 왔으나 이러한 방법들은 영상의 노이즈에 대하여 크게 영향을 받는다는 문제점이 있다. 그러나 본 알고리즘은 영상의 노이즈에 대하여 크게 영향을 받지 않을 뿐만 아니라 시간대 변화에 따른 도로의 명암값(intensity or gray level)을 추정할 필요가 없다는 특징이 있다. 특히, 야간 영상인 경우 차량 헤드라이트로 인한 검지오류도 감소할 수가 있다. 본 논문에서 실험은 주간, 야간 각각 1개 차선의 80개 표본크기로 실험을 하였으며, 대기길이는 정지 대기길이(standing queue length)와 이동 대기길이(moving queue length)로 나누어 측정을 하였다. 그 결과 주간, 야간의 경우 정지 대기길이는 2.14%, 2.24%, 이동 대기길이는 2.59%, 2.74%의 오차율로 측정이 되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.3
• /
• pp.29-36
• /
• 1991

This experimental research evaluated the length of crack extension with the measured compliances as the mutual comparison factors instead of the method proposed in ASTM E561-80. And this research measured the R-curves with the application to the concept of the strain energy release rate that was formulated from the inelastic energy absorbed during the crack growth. With the interpretation of R-curves, this research obtained the starting point of the unstable crack growth, and compared the values of critical fracture toughness with each other, and then examined the effects of variations of the maximum size of coarse aggregate and the thickness of specimen on the values of the critical fracture toughness.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.2 no.1
• /
• pp.130-138
• /
• 2000

본 연구에서는 수평보강재로 보강된 터널 막장의 거동에 관한 매개변수 연구결과를 다루었다. 매개변수 연구에서는 막장주변의 3차원 응력-변형율 거동을 보다 효율적으로 모델링하기 위해 3차원 유한요소해석 모형을 적용하였으며 보강패턴에 따른 막장의 거동을 고찰하기 위해 다양한 경계조건에 대한 해석을 수행하였다. 해석결과를 토대로 막장의 응력해방-변위거동의 관계를 고찰하였으며, 보강패턴과 막장 변위의 정성${\cdot}$정량적인 관계를 제시함과 아울러서 향후 수행될 반경험적 설계/해석법의 개발을 위한 데이터베이스를 구축하였다. 한편, 해석결과 보강재 타설수 및 길이 등 각 보강설계 인자에 대한 임계치가 존재하는 것으로 나타났으며 따라서 보다 안전하고 경제적인 설계를 위해서는 이를 고려하여야 할 것으로 판단된다.

• The Journal of Engineering Geology
• /
• v.27 no.1
• /
• pp.31-40
• /
• 2017

The slope stability analysis by the limit equilibrium method has the disadvantage that it can be applied only when the analysis is performed by setting the critical plane after analyzing the active surface many times and the soil is uniform and only the safety factor can be calculated. However, the analysis using the strength reduction analysis method has advantages that the engineer can judge various aspects and calculate the safety factor. In this study, the safety factor according to the change of slope and shear strength was compared and analyzed using limit equilibrium analysis and strength reduction method. It is suggested that it is desirable to use the strength reduction method which can synthetically review the stress, displacement, and strain in the soil.

• Economic and Environmental Geology
• /
• v.53 no.5
• /
• pp.585-596
• /
• 2020

The 2017 Pohang Earthquakes occurred near a drill site in the Pohang Enhanced Geothermal System. Water injected for well stimulation was believed to have reactivated the buried near-critically stressed Miocene faults by the accumulation of the Quaternary tectonic strain. However, surface expressions of the Quaternary tectonic activity had not been reported near the epicenter of the earthquakes before the site construction. Unusual, large-scale water-escaped structures were identified 4 km away from the epicenter during a post-seismic investigation. The water-escaped structures comprise Miocene mudstones injected into overlying Pleistocene coastal sediments that formed during Marine Isotope Stage 5. This indicates the vulnerable state of the mudstones long after deposition, resulted from the combined effects of rapid tectonic uplift (before significant diagenesis) and the development of an aquifer at their unconformable interface of the mudstone. Based on the detailed field analysis and consideration of all possible endogenic triggers, we interpreted the structures to have been formed by elevated pore pressures in the mudstones (thixotropy), triggered by cyclic ground motion during the earthquakes. This interpretation is strengthened by the presence of faults 400 m from the study area, which cut unconsolidated coastal sediment deposited after Marine Isotope Stage 5. Geological context, including high rates of tectonic uplift in SE Korea, paleo-seismological research on Quaternary faults near the study area, and historical records of paleoearthquakes in SE Korea, also support the interpretation. Thus, epicenter and surrounding areas of the 2017 Pohang Earthquake are considered as a paleoseismologically active area, and the causative fault of the 2017 Pohang Earthquakes was expected to be nearly critical state.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.5
• /
• pp.530-537
• /
• 2008

Austenitic stainless steels(SUS 304, SUS 316), which are used for safety control valve of LNG carrier, are occasionally exposed in the cryogenic environment. In this regards, it is required to evaluate the mechanical characteristics under the low temperature environment. In this study, a series of uniaxial tensile test was carried out varying temperature for austenitic stainless steel. The phenomena of the strain-induced plasticity have been observed on the all temperature ranges. The critical value for threshold of 2nd hardening due to the phase transformation induced plasticity as well as the increase of hardening have been reported. The summarized experimental results would be used for the validation of numerical techniques applicable for the nonlinear hardening behavior of austenitic stainless steel under the cryogenic temperature environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.1
• /
• pp.20-28
• /
• 1992

Co-articulation is one of major factors that make connected word recognition difficult. This Study Considers the fact that the head Part Of the following word is changed by the Preceding word in a connection point, by applying the co-articulation model, and adj usting the following word .We choose a critical damping second order linear system for the co-articulation model, combining a one-stage DP matching recognition algorithm with this model, and Investigating the effects. The recognition experiment is carried out for 35 Korean 4 connected digits spoken by 5 male speakers, and recognition rate Is upgraded by 4.7 percent.

• Korean Journal of Environmental Biology
• /
• v.27 no.3
• /
• pp.292-296
• /
• 2009

This study was conducted to estimate relationship between temperature and egg development of Nannophya pygmaea, an endangerd dragonfly species in Korea, using eight different temperature conditions (17, 20, 22, 25, 28, 30, 33, and $36^{\circ}C$). Eggs of N. pygmaea were collected from female adults inhabited a small wetland in Mungyeong-si, Gyeongsangbuk-do, Korea, in June 2007. As a result, hatching rates were 2.86, 17.09, 24.32, 39.67, 34.43, 40.57, 44.79, and 1.75% at 17, 20, 22, 25, 28, 30, 33, and $36^{\circ}C$, respectively. The nonlinear model of the temperature related to egg development was well fit to the modified Sharpe and DeMichele model. The derived lower developmental threshold temperature for egg hatching was $14.02^{\circ}C$(y=0.005988x-0.084, $r^2$=0.99), and the derived optimal development temperature was $30{\sim}35^{\circ}C$.