• Journal of the Korean Magnetics Society
• /
• v.11 no.2
• /
• pp.45-49
• /
• 2001

Effects of multilayer structure and annealing condition on the soft magnetic properties of sputtered Fe/CoNbZr multilayers were investigated. We observed a minimum coercivity (1.1 Oe) at 5 nm thick Fe layer and the maximum permeability (2300) at 15 nm Fe layer and high saturation magnetization in the as-deposited state. As a result of increase of Fe grain size, coercivity increases with increasing Fe layer thickness. Degradation of ${\mu}$ at the thin Fe layer region may be due to the intermixed phase of high magnetostriction, such as CoFe. Optimum annealing condition was obtained through annealing at 300 $^{\circ}C$ for 40 min (${\mu}$=2500, H$\sub$c/=0.35 Oe). Enhancement of permeability was observed in the temperature range of 250∼300$^{\circ}C$. These results may closely be related with lowering the anisotropy energy by lattice deformation (0.4%) and enhanced uniaxial anisotropy.

• Journal of the Korean Magnetics Society
• /
• v.2 no.3
• /
• pp.263-267
• /
• 1992

We have developed new techniques to measure the magnetization and coercivity of a uniaxial magnetic material using a torque magnetometer. The magnetization could be measured from the slope of the linear region in a plot of the torque ${\tau}/H$ versus the applied field H, when the direction of the applied field was normal to the uniaxial orientation. While, the coercivity could be obtained by taking the value of applied field where the torque was zero, when the direction of the applied field was $(180+{\delta})$ degrees from the uniaxial orientation. The techniques were applied to determine the magnetizations and coercivities of several Co /Pd multilayer thin films and the results were confirmed to be similar within a 2 % difference to those obtained by a vibrating sample magnetometer.

• Tunnel and Underground Space
• /
• v.19 no.3
• /
• pp.213-225
• /
• 2009

The purpose of the study is to evaluate the effects of chemical weathering on the granite and orthogneiss in Wonju area based on accelerated artificial chemical weathering. The rock samples were scrutinized the variation of index properties and ion exchanges caused by artificial chemical weathering which was implemented with leaching test for 170 days using double soxhlet extractor. The differential weathering and decrease of p wave velocity were obtained by weathering process without significant changes of porosity. In case of granite samples, the uniaxial compression strength was reduced by 20% and 16% for the F-grade and SW-grade, respectively. For MW-grade granite, however, was not able to examine the effect of strength reduction due to lack of sample number. Also, for orthogneiss, it is difficult to compare the values of uniaxial compressive strength between before and after the test because of its strong anisotropy.

• The Journal of Engineering Geology
• /
• v.26 no.4
• /
• pp.593-600
• /
• 2016

To understand the mechanical properties of rock masses and intact rock in Korea, data from 4,280 in situ and laboratory tests from 107 tunnels on general national roads were analyzed. The mechanical properties (unit weight, cohesion, friction angle, modulus of deformation, Young's modulus, Poisson's ratio, uniaxial compressive strength, tensile strength, coefficient of permeability, and specific gravity) were analyzed by rock types and strength of rock in each rock type. The results of analysis, the mean specific gravity was highest in gneiss. The coefficient of permeability and Poisson's ratio show the highest mean values in granite and metamorphic rock, respectively. In addition, the unit weight, cohesion and friction angle in sedimentary rock, modulus of deformation, Young's modulus, uniaxial compressive strength and tensile strength in volcanic rock have the highest mean values. The values for each mechanical property showed wide ranges by the heterogeneity and anisotropy of rock masses in spite of detailed analysis by rock type and classification of rocks according to the strength.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.69-78
• /
• 1991

This paper concentrates on the analysis of deflection of the reinforced concrete flexural members under monotonic loading. Concrete is treated as an orthotropic nonlinear material. The concept of equivalent strain and crack strain are used to establish independent stress-strain relationships in the directions of orthotropy. Steel is modeled as an elstoplastic material, and von Mises failure criterion is applied. The finite element computer program for the nonlinear analysis of the deflection of RC flexural members under monotonic loading is developed. The accuracy and reliability of the numerical procedure is demonstrated by the FEM analysis and experiments of the under reinforced concrete beams over the entire loading range up to failure.

• Journal of the Korean Magnetics Society
• /
• v.7 no.4
• /
• pp.191-195
• /
• 1997

$Co_{84}Hf_{16}$ (1300$\AA$, 2150$\AA$) thin films were prepared by dc magnetron sputtering method. To investigate the uniaxial anisotrpy of the sample, the saturation and effective magnetization of the thin films were measured by VSM and FMR, respectively. The spectroscopic splitting g factor were estimated from the ferromagnetic resonance curves. For 1300$\AA$, 2150$\AA$, the effective magnetization was measured at the temperatures from T=77K to T=300K. The results were analyzed in terms of Bloch's law $M_s(T)=M_s(0)(1BT^{3/2}CT^{5/2}$. The Bloch coefficient B and C were determined by fitting. $M_{eff}(0)$ was obtained by extrapolating $M_{eff}$ to 0 K. From this result, the spinwave stiffness constants D was also determined and the exchange stiffness constants $A_{eff}$ were calculated by Kittel's resonance conditions.

• Economic and Environmental Geology
• /
• v.18 no.4
• /
• pp.343-355
• /
• 1985

Spectral reflectivity and microhardness were measured quantitatively on polished surfaces of a selection of bireflecting minerals obtained from several well known metallic deposits. Incremental errors are much higher than decremental errors and errors were found to be lowest in the spectral region close to the green wavelength ($544m{\mu}$). The characteristics of the spectral profile are significant in their control of white light color. The covellite and graphite have reflectivity profiles similar in shape for each principal direction, showing noticeable difference in magnitude between the profiles: The spectral reflectivity of covellite parallel to the extraordinary vibration is higher (R$$\simeq_-$$10%) than that parallel to the ordinary vibration and graphite shows opposite feature. Reflectivity of the enargite and famatinite cut parallel to the cleavage plane is always higher (R$$\simeq_-$$5%) than that of the section cut normal. The optical symmetry of 5 bireflecting minerals was determined by noting the variation in reflectivity at $544m{\mu}$. The data indicate that covellite is optically uniaxial positive and graphite is optically uniaxial negative. The Rm values for enargite and famatinite are clearly closer to the minimum value for the mineral ($R_1$) than to the maximum value ($R_2$) : the minerals can be recognized as optically biaxial positive. Enargite and famatinite cut parallel to cleavage have much higher hardness values (HV=> $200kg/mm^2$) than those cut normal to cleavage. Vickers indentations exhibit characteristic features for all the bireflecting mineral species studied. Broad radicle groupings of the mineral species can be made with regard to the reflectivity microhardness numbers.

• Electrical & Electronic Materials
• /
• v.1 no.4
• /
• pp.319-332
• /
• 1988

높은 포화자속밀도와 낮은 철손을 갖는 Fe/aub 80/B$_{12}$Si$_{8}$ 비정질합금을 일반열처리, 자장열처리시켜 그의 자기적특성과 자구구조와의 관계를 조사하였다. 이를 위하여 Fe$_{80}$B$_{12}$Si$_{8}$ 비정질리본을 단롤법으로 제작하여 결정화온도를 측정하였으며 측정된 결정화온도 이하의 여러 온도에서 30분간 Ar-gas 분위기하에서 일반열처리, 자장열처리를 행하였다. 이와같이 하여 준비된 시료의 자기적특성을 조사하기 위하여 D.C., A.C. Recorking Fluxmeter를 이용하였으며 자구구조는 Bitter method로 관찰하였다. as-cast 상태의 시료를 일반열처리함에 따라 내부응력이 완화되면서 maze자구가 점차 사라지고 wave형태의 180.deg.자구가 관찰되었다. 동시에 자화과정에 있어서 자기이력곡선은 Barkhausen jump가 없어 smooth하였다. 그리고 자장열처리시에는 as-cast 상태나 일반열처리에 비해 자기적특성이 현저하게 향상되었으며 이는 열처리를 행함에 따라 내부응력이 완화되면서 maze 자구가 없어지고 일축자기 이방성으로 리본길이방향에 평행하게 형성된 180.deg.자구에 기인하는 것이라 사료된다. 그리고 자장열처리의 경우, 폭방향으로 열처리한 리본의 자구폭은 길이방향으로 열처리한 리본의 폭보다 미세하였으며 전자의 이력손실이 후자의 것보다 더 컸다.다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.7
• /
• pp.513-517
• /
• 2004

Porous alumina ceramics with aligned plate-shaped pores were fabricated by using thermoplastic microsphere in order to show the anisotropy in thermal conductivity. The mixed powder of alumina and microsphere was pressed under 15 MPa till 20$0^{\circ}C$ to deform polymer into platelet-shape and sintered at 1,00$0^{\circ}C$ for 1 h. The sintered specimen with 10 wt% microsphere has 45.3% porosity and the bending strength of 44 MPa. The microstructural investigation confirmed the pore structure of platelet-shape, the thermal conductivities for vertical and parallel directions are 3.803 W/mK and 7.818 W/mK, respectively, the ratio between two directions exceeds 2.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.855-858
• /
• 2003

When the PbO-based flux system is used in the Liquid Phase Epitaxy (LPE) method for Yttrium Iron Garnet (YIG) thick film, the effect of Pb ions incorporated into the grown crystal; increase the lattice parameter, changed the uniaxial magnetic anisotropy constant (Ku) or conductance of grown film. It exerts a bad influence on physical property such as increasing optical absorption of grown film. The content of the Pb ion in crystal was decreased by volatilization of Pb ion after annealing; therefore, the lattice parameter of film was reduced on an average 0.0115 ${\AA}$ by the the Pb ion.