• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.1
• /
• pp.173-197
• /
• 2004

It is searched that 56 out of 185 university libraries(30.2%) has adopted 'subject specialization' organization. This 'subject specialization' emerged when university libraries began to care about their users and services for them more than other factors in planning and structuring their organization. The number of university libraries which try to adopt that organization has been continuously increasing. To settle 'subject specialization' in the university libraries under Korea's proper condition and to maximize its effect, each library should consider one's own conditions and step the reasonable procedure in adopting that system. Considering the similar condition which the university libraries in Korea face such as shortage of material support, 'Mixed Model of subject specialization" is reasonable, which means in whole structure of library function-oriented organization is adopted and in Reference Service, subject specialization is adopted. However, the ideal and final destination of Korea's university libraries is the adoption of 'Full subject specialized model": it can be reached when they are supported by sufficient human resources and good conditions.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.3
• /
• pp.331-341
• /
• 2018

This study proposes an integrated serial spring-damper mechanism as a dual pulse generation system. Compared to the traditional dual pulse generation system, which used multiple springs and a damper to generate a dual pulse critical for impact testing of naval equipments, currently used separated serial spring-damper mechanism is comprised of two components: an air spring, and a damper. The proposed mechanism combines the two components into one integrated system with a unique design that lets simply changing the volume and the pressure of the air tank, and the length of the annular pipe adjust the stiffness and damping constants for testing, eliminating the need to have multiple sets of air springs and dampers. Simulations using MatLab and Simulink were conducted to verify the feasibility of this design. The results show the potential of an integrated serial spring-damper mechanism as a more convenient and flexible mechanism for dual pulse generation system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.1
• /
• pp.140-148
• /
• 2012

Recently there are many attempts to introduce PC construction method in buildings. But the study on PC structural wall has been made progress so slowly because it is very difficult to develop new items. In this study, we have developed new vertical joint on PC wall in order to upgrade constructivity and structural performance of the existing connections, then we have evaluated the seismic resistance performance. As a result of the cyclic loading tests for two specimens, proposed vertical joint on PC wall has shown that it behave the excellent structural performance in comparison to PC wall having no joint. Therefore, we think that proposed vertical joint is the system to apply buliding structure.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.889-893
• /
• 2005

본 연구에서는 기후변화에 따른 신뢰성 높은 수자원 영향평가를 수행하기 위한 방안으로 유출모형에 따른 불확실성을 최소화할 수 있는 슈퍼앙상블 기법을 제안하였다. 유출모형들은 자연현상을 개념화하는 과정에서 목적에 따라 알고리즘이나 구조가 다르게 개발된다. 따라서 동일한 유역에 동일한 입력자료를 사용하더라도 유출모의 결과는 상이하며 이는 곧 불확실성으로 작용한다. 이러한 불확실성을 최소화하기 위한 방법으로 본 연구에서는 통계적기법인 인공신경망 모형을 이용하여 모형별 유출결과를 향상시킬 수 있는 슈퍼앙상블 기법을 개발하고 적용성을 분석하였다. 적용 대상유역으로는 한강수계에 위치한 괴산댐유역을 선정하였으며, 적용 모형으로는 일체형 모형인 Tank 모형과 준분포형 모형인 PRMS 모형을 이용하여 슈퍼앙상블을 구축하고 검정하였다.

• Electronics and Telecommunications Trends
• /
• v.28 no.3
• /
• pp.106-114
• /
• 2013

과거 이동통신용 기지국은 기저대역 처리부와 안테나를 포함하는 RF부가 일체형으로 제작되었으나, 4세대 이동통신에서는 기술/경제적인 이유로 BBU(Base Band Unit)와 RRH(Remote Radio Head)로 분리하여 구성되는 분산형 기지국 구조를 택하는 추세이다. BBU와 RRH 간 인터페이스로 널리 사용되어온 OBSAI, CPRI외에 2010년 ORI가 출현하여 표준화가 한창이다. ORI는 시장에서 널리 사용되는 CPRI(Common Public Radio Interface)의 Vendor Specific 부분으로 인해 제조사간 호환성이 보장되기 어려운 문제를 보완하기 위하여 탄생한 인터페이스 규격으로써, CPRI를 기반으로 하면서 표준으로써의 완성도를 높인 표준이라 할 수 있다. 또한 관련 표준으로는 유일하게 IQ 데이터 압축알고리즘의 표준화를 고려하고 있다. 본고에서는 ORI의 표준화 현황과 기술적인 이슈를 소개하고, 국내의 대응 현황을 알아본다.

• Journal of Institute of Convergence Technology
• /
• v.4 no.1
• /
• pp.29-32
• /
• 2014

최근 유가상승 및 환경오염으로 인하여 자동차 연비 개선에 대한 관심이 날로 증가하고 있어 자동차 제조사들은 다양한 접근방법을 통해 경량화를 달성하고자 하고 있다. 경량화 방법으로는 경량재료의 적용, 고강도 소재를 이용한 부품소형화, 조립식 파트의 일체형 모듈화 등이 있으며, 본 연구에서는 경량구조재료인 마그네슘 합금을 자동차용 스크롤 압축기에 적용하기 위하여 기존 알루미늄 합금부품과의 열팽창 및 열변형의 비교를 통해 마그네슘 합금 적용한 스크롤 부품의 설계시 고려되어야 할 요소들을 분석 및 제시하고자 한다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.67-70
• /
• 2009

송수신기 일체형인 소형 루프 시스템을 해저 전자탐사 기술의 적용 가능을 확인하는 과정의 시작 단계로 자기 쌍극자 송신원을 이용한 층서구조에서의 전자가 반응을 계산 하였다. 전도성인 해양 환경에서 측정되는 신호의 크기가 작은 한계가 있지만 전자기장 반응 해석을 통행 지하 하부의 정보를 얻을 수 있었다. 기반암 위의 층이 바닷물보다 저항성인 해저 지각인 경우와 전도성인 열수광상인 경우에 따라 반응이 달라짐을 확인하였고, 그 층의 두께에 따라서 변화하는 전자기 반응을 계산하여 탐지 가능한 층의 두께를 예상할 수 있었다. 송수신기가 모두 바다 속에 위치하기 때문에 송수신기의 배치 방법과 송수신기가 해저면에서 떨어지게 될 때 신호의 반응 변화를 파악하였다. 해양 소형 루프 전자탐사의 실제 적용을 위해서 이상의 연구들이 기초가 될 것으로 기대된다.

• Composites Research
• /
• v.30 no.6
• /
• pp.384-392
• /
• 2017

Sandwich panels with three different joint configurations were tested to design a novel sandwich joint structure that can effectively support both the tensile and compressive loads. The sandwich core was mainly aluminum flex honeycomb but the PMI foam core was limitedly applied to the ramp area which is transition part from sandwich to solid laminate. The face of sandwich panel was made of carbon fiber composite. For configuration 1, the composite flange and the sandwich panel were cocured. For configurations 2 and 3, an aluminum flange was fastened to the solid laminate by HI-LOK pins and adhesive. The average compressive failure loads of configurations 1, 2, and 3 were 295, 226, and 291 kN, respectively, and the average tensile failure loads were 47.3 (delamination), 83.7 (bolt failure), and 291 (fixture damage) kN, respectively. Considering the compressive failure loads only, both the configurations 1 and 3 showed good performance. However, the configuration 1 showed delamination in the corner of the composite flange under tension at early stage of loading. Therefore, it was confirmed that the structure that can effectively support tension and compressive loads at the same time is the configuration 3 which used a mechanically fastened aluminum flange so that there is no risk of delamination at the corner.

• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.138-148
• /
• 2006

This study was carried out to evaluate the structural safety fur both the attached wind-protecting wall in greenhouse and the detached one installed outside. Regarding the attached wind-protecting wall in greenhouse, the analysis was conducted by doing a fluid-structure coupled field analysis using both CFX-5.7 and ANSYS 8.1 and also under the design condition of an instantaneous maximum wind velocity of $30.9m{\cdot}s^{-1}$. Three kinds of the width ranged from 30 to 90cm were considered in this study. With regard to the detached wind-protecting wall, the structural saffty was analyzed under the pressure difference of 1,117 Pa which corresponded to a wind velocity of $50m{\cdot}s^{-1}$ and the analytical results were also compared with theoretical ones. The result showed that there was little difference in the distribution of velocity overall and total pressure on the lateral side according to the width of the attached wind-protecting wall, but greenhouse with wind-protecting widths of 30 to 60cm has been reinforced to the extent of about 11% when compared with the case of being without the wall. The result also showed that the detached wind-protecting wall with a main-column interval of 3m was not stable so that it was necessary for the detached wind-protecting wall to be adequately reinforced to secure structural stability. Finally, there was great difference between analytical results and theoretical studies. The difference meant that there was some possibility of including errors when a theoretical study was done in three dimensional structure.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.219-228
• /
• 2013

The surveillance imaging equipments are functioning to observe the shape of the target in real time or to measure its location precisely. The roles of such equipments are becoming more important in today's weapon systems.The aforementioned imaging equipments can be classified based on the modes of operations such as fixed, installed on cars, or composite of those. Also, according to different concepts of sensor operation, a separate type uses independent housing for each sensor whereas in a composite type a set of multiple sensors are housed into a unit altogether. The sensors in general have magnetism, thereby introducing the possible negative effects, particularly in the composite types, in locating the reference position, which is carried out by the digital compass. The use of shielding material/housing could be an option but results in increased weight and reduced portability, restricting its use in composite type equipments. As such, the objective of this paper is to study on how to reduce such magnetic effects on the position location. To do so, in the absence of magnetic shielding, a variety of sensor positions were first modeled. By combing the result with the fact that the functions of PAN & Tilt are used in the equipments, a new position location algorithm is proposed. The use of the new algorithm can automate the position location process as compared to the manual process of the existing approach. In the algorithm developed, twelve locations are measured in connection with both the azimuth and elevation angles in comparison to the six locations alone around the azimuth angle. As a result, it turns out that the measurement range has been widened but the measurement time reduced. Also, note that the effect of errors the operators may make during measurement could be reduced.