• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.317-327
• /
• 2012

The average specific cake resistance, the most important indicator for cake filtration and solid-liquid separation, is measured by filtration experiment. But the exact value is difficult to measure because of the other influences such as sedimentation during filtration. This study, a little more stable method named filtration-permeation is proposed for measuring average specific cake resistance. The filtration-permeation is composed of permeation of particle eliminated water through pre-formed cake by filtration. Using 1 wt% calcium carbonate suspension, the filtration-permeation experiments were performed for 8 kinds of filter media at the conditions of 0.5 atm and 0.2 atm, 1 and 3 sheets of filter media. At each specific condition, three to five times filtration-permeation were accomplished. As a result, stable permeation speed is measured. According to this experimental result, the characteristics of permeation and the effect of sedimentation are analyzed with Ruth's equation. The one way analysis of variance (one way ANOVA) is applied to the average specific cake resistances of filtration and permeation obtained with the selected three kinds of filter media. The average specific cake resistances between 0.5 atm and 0.2 atm by filtration do not distinguished, but those by permeation is perfectly distinguished. The experimental results during permeation have a very narrow distribution than that measured during filtration. The analysis of filtration experiments, it was verified that the resistance of filter medium by traditional method is of no significance. Finally, the migration of small particles through the medium composed of fiber glass at low pressure was studied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.27-33
• /
• 2016

Military textiles with breathable waterproof materials are expanding as form of winter clothes. Waterproof moisture-permeable clothes are very important for soldiers to survive in cold weather operations because they prevent loss of body heat from the penetration of water into the human body. Korea military uses the water resistance and moisture permeability to test the performance of waterproof moisture-permeable materials. Moisture permeability is measured according to the amount of evaporated water vapor passing through a fabric under specified temperature and humidity by using acetic acid potassium presented in KS K 0594. However, the test procedure for measuring the moisture permeability in the standard is presented only briefly and the preparation procedures for the test in accredited testing institutions are applied differently, leading to significant deviation of the results. This paper compares the procedures of testing institutions and examines the factors that affect moisture permeability. Finally, we propose a procedure to reduce the deviation of results and apply the proposed procedure in testing institutions. Our analysis results with one-way ANOVA under significant level (0.05) confirm that the deviation of results is reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6647-6654
• /
• 2015

The purpose of this study was to analysis a Korean version of Satisfaction with Simulation Experience(SSE) Scale by paramedic students. Total number of 111 students majoring in the EMT-paramedic education area have taken part in the survey after completing the professional cardiac resuscitation simulative training, using the standardized simulation satisfaction evaluation method (SSE scale). Through the scale, one's preference, necessity, ACLS theory grade, and satisfaction rate per year regarding the training were measured. To analyze one's preference, necessity, ACLS theory grade, and satisfaction rate per year in regards to the training, one-way ANOVA was used. The result reveals that the overall satisfaction rate was generally quite high. When one's preference and necessity rate is high, the satisfaction rate also seems to increase. The result indicates that the simulation training will enhance the students' clinical skill, patient evaluation, and treatment capability as well as one's field adaptation skill at the time of an emergency occurrence. Eventually, training through the ACLS simulation will be used in the future for the benefit of encouraging students from emergency rescue to adapt to the site of an emergency. Therefore, such an education method should be maintained and further developed.

• Journal of Advanced Technology Convergence
• /
• v.1 no.1
• /
• pp.25-31
• /
• 2022

This study is a descriptive survey study conducted with the aim of analyzing differences in consumption patterns according to the personality types of the Enneagram and providing basic data that can be used for advertising and branding based on it. 43 people who explained the purpose of the study and agreed to participate were conveniently recruited. The research tools were investigated online with the type of personality of the Enneagram of Joo (2003) and the consumption pattern of Jeon (2013). The data analysis utilizes statistical methods such as descriptive statistics, frequency analysis, and one-way ANOVA in the IBM SPSS Statistics 23 program. For consumption patterns 1, 2, 3, and 6, there were statistically significant differences between personality types 1, 2, 3, 5, 7, and 9 (p<.050). Through this study, it was confirmed that consumption patterns vary depending on the type of personality of the Enneagram. The results of this study are expected to provide basic data in establishing effective strategies for branding and advertising of the design that consumers want.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.260-268
• /
• 2017

Purpose: Manufacturing with AM (Additive manufacturing) technique has many advantages; but, due to insufficient study in the area, it is not being widely used in the general clinic. In this study, differences of flexural strength among various materials of 3 unit fixed dental prosthesis were analyzed. Materials and Methods: A metal jig for specimens that had a 3-unit-fixed dental prosthesis figure were fabricated. The jigs were made appropriately to the specifications of the specimens. Three different kinds of materials of specimens which were NC (mathacrylic esther based), DP-1 (Bisphenol A epoxy acrylate type oligomer based), and DT-1 (urethane acrylate based) were printed with DLP machine. Five specimens for each kind of material were printed with an angle of $30^{\circ}$ from the horizontal surface. The specimens were placed on the jig and the flexural strength was measured and recorded using Universal testing machine. The recorded data was analyzed in SPSS using One-way ANOVA and Tukey HSD to determine the significance of the differences of flexural strength among the groups. Results: The flexural strengths of each group were the followings: NC, $1119{\pm}305$ N; DP-1, $619{\pm}150$ N; DT-1, $413{\pm}65N$. Using One-way ANOVA and Tukey Honestly Significant Difference test, significant difference was found between NC and the other groups (P < 0.05), but there was no significant difference between DP-1 and DT-1 (P > 0.05). Conclusion: Higher flexural strength was shown in 3-unit-fixed dental prosthesis that were 3D printed using a DLP machine with NC material.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6611-6617
• /
• 2015

The purpose of this study is to compare the marginal and internal fit of metal and zirconia coping which is fabricated by manual and CAD/CAM(Computer Aided Design/Computer Aided Manufacturing). The model is prepared with Urethane material and two abutment teeth are fabricated with a knife and chamfer margin. Silicon replica technique is used to measure the marginal fit of manually fabricated and the CAD/CAM coping. Internal fitting level is measured with a microscope and the image is captured with a CCD camera. The distance between abutment teeth and coping is measured with a callibrated image analyzer software; marginal opening (MO), marginal gap (MG), internal gap (IG) at maximum curvature area, axial gap (AG), and occlusal gap (OG). Two-way ANOVA test is applied to compare fabrication technique and to analysis of abutment pattern. In addition, one-way ANOVA and Scheffe's test is used to analyze each parameter of the test. The result shows that the fit is < $120{\mu}m$ except OG of CAD/CAM and MO of knife margin. The CAD/CAM fabricated coping showed higher fit level at chamfer margin. However, knife margin showed better fitness compared to chamfer margin at MG. AG showed the minimum dimension with a constant result (< $38{\mu}m$).

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.306-316
• /
• 2007

Based on a concept of soundscape, this study aims to investigate Koreans' preference for auditory elements, features, and impressions depending upon the season, and examine how these auditory factors of soundstape and seasons interact with each other and attempt to discover their influence on people's auditory preferences. According to an environmental psychological approach called the caption evaluation method, 45 college students examined the soundscape of Namwon City while racing the streets in four seasons. In order to analyze the interactions between seasons and such auditory factors as elements, features, and impressions, it was conducted the GLM univariate analysis and the NPAR tests for independent samples. The results of the analyses show that there are interactive effects between seasons and auditory factors like elements, features, and impressions and that the auditory factors have an effect on auditory preference. Moreover, as for seasonal preference for auditory elements, it was found that people prefer natural sound in spring, summer, and fall while they prefer social sound in winter. Concerning seasonal preference for auditory features, people place a focus on the behaviors in spring, summer, and winter while they stress the surroundings in autumn, as for seasonal preference for auditory impressions, they make much of sound characteristics in spring and winter but they value the atmosphere of streets in summer and fall. The results of this study can he utilized as useful data in determining which auditory factors among elements, features, and impressions to take into consideration in a soundscape design.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.4
• /
• pp.765-775
• /
• 2010

Objectives : 노인 환자들이 제공받고 있는 치과 의료서비스 만족도를 평가하여 노인 환자에게 양질의 구강보건진료 서비스를 제공하고 노인의 구강보건향상에 기여하기 위하여 실시하였다. 이와 같은 연구목적을 달성하기 위하여 노인관련 일반적 특성을 알아보고, 치과 병 의원을 이용하는 노인 환자의 만족도에 미치는 요인 및 병 의원 선택이유를 조사하였다. Methods : 서울특별시와 경기도, 경상도, 전라도 일부지역의 치과병원 및 치과의원을 이용하는 노인 환자 300명을 편의추출 하였으며, 2009년 4월 1일부터 5월 8일까지 면접 및 자기기입법으로 설문조사를 실시하였다. 설문지는 4개영역으로 구분하여 치과 의료서비스 만족도 22문항, 치과위생사의 의료서비스 만족도 14문항, 재이용 권유의사 4문항 및 일반적 특성과 치과이용에 관한 8문항으로 구성하였다. 노인환자의 일반적인 특성에 따른 치과 의료서비스 만족도, 연구대상자의 병원인지경로, 치과선택이유에 따른 치과의료서비스 만족도는 일원배치분산분석(One-way ANOVA)을 실시하였다. 치과의료서비스 만족도 영향인자, 만족도에 미치는 치과위생사 요인 등은 다중회귀분석을 실시하였다. 연구대상자의 성별과 병원내원기간에 따른 치과선택이유는 카이제곱 (${\chi}^2$) 분포를 따르는 정확검정(exact test)을 실시하였다. Results : 1. 노인환자들이 병원을 선택할 때 가족, 친척으로부터 추천을 받는 경우가 가장 많으며 이 경우 다른 인지경로에 비하여 치과에 대한 만족도가 가장 높았다. 2. 치과선택 이유에 따른 만족도를 비교하였을 때 첫째, 의사의 높은 진료수준, 둘째, 친절한 서비스에 만족도가 높았다. 또한 치과선택이유가 의사의 높은 진료수준과 친절함을 포함한 의사요인이 가장 중요한 것으로 나타났다. 3. 치과위생사의 높은 진료수준과 친절도는 치과의료서비스 만족도에 유의한 차이를 나타내었다. 노인환자들의 만족도를 높이기 위해 노인에 대한 치위생교육이 필요하고 노인에 대한 지식뿐만 아니라 태도에 대한 교육도 실시되어야 한다. 4. 동일한 치과를 계속적으로 다니는 이유는 첫 번째 의사의 높은 진료수준, 두 번째 친절도로 의사요인과 관련이 가장 높은 것으로 나타났다. 또한 3-4년 이상의 장기내원환자는 의사의 높은 진료수준 다음으로 친절도를 중요한 이유로 선택하였다. Conclusions : 이상의 결과로 노인 환자가 만족하는 치과는 치과의사와 치과위생사의 진료수준이 높아야 하겠고, 다음으로 친절한 서비스가 중요함을 알 수 있었다. 또한 노인환자들의 만족도를 높이기 위해 노인에 대한 치위생교육이 필요하고 노인에 대한 지식뿐만 아니라 태도에 대한 교육도 실시되어야 한다.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.8 no.2
• /
• pp.115-120
• /
• 2009

Purpose: To evaluate the outcomes of three different surgical approaches in treating a distal radius fracture with dorsal communition. Materials and Methods: From April, 2006 to May, 2009, 49 patients over age of 60years old with unstable dorsal communition distal radius fracture were analyzed. We compared maintainability of reduction by radiological follow-up observations and clinical outcomes using Mayo wrist scores. One-Way ANOVA test was performed to examine the statistical correlation between the methods. Results: All three approaches provided satisfactory post-op reduction results. However, follow-up observations showed significant loss of reduction in the external fixation only group compared to the added bone graft group and the volar anatomical locking plate group (P<0.05). Mayo wrist score was indifferent between the three groups. Conclusion: Treatment of a distal radius fracture with severe dorsal communition using an external fixation only appears to be insufficient in maintaining reduction of a cancellous bone defect.

• Korean Journal of Psychosomatic Medicine
• /
• v.21 no.1
• /
• pp.55-61
• /
• 2013

Objectives : Alzheimer's disease(AD) and mild cognitive impairment(MCI) affect several nervous structures involved with the autonomic nervous system. Association between neuropsychiatric deficits and heart rate variability has been observed. But cardiac autonomic function in AD has been scarcely studied and the results reported are conflicting. We investigated autonomic function in normal control, MCI, AD using heart rate variability(HRV) technique. Methods : Time and frequency-domain variability of 5-min R-R interval series was comparatively evaluated in 26 normal control subjects, 22 MCI subjects and 34 AD subjects. Analysis of variance(ANOVA) was used to compare the differences across groups. Correlations between MMSE-KC and HRV components were performed using Pearson's correlation coefficient. Results : No significant difference was observed among the groups in time, frequency-domain analysis of HRV(p>0.05). HRV were not found to be significantly correlated with the degree of cognitive impairment. Conclusions : There were no differences in HRV with MCI, AD subjects when compared with normal controls. Further investigation is required to use HRV technique as noninvasive parameters of MCI and AD.