• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.61-66
• /
• 2010

The purpose of this experiment is to analyze the basic status of brain. Which are consist of rest, attention and concentration, of the brain by measuring the temperature of color by changing RGB color after manufacturing LED-illumination stand. Basic status (rest, attention and concentration) of experimenter were measured temperature of colors having three difference temperature like as $2,300^{\circ}K$, $4,000^{\circ}K$ and $6,000^{\circ}K$. The results was shown that experimenter feels more comfortable and relaxation by decreasing the temperature of color. For example we can see the little increase of concentration index at $4,000^{\circ}K$ condition and we can estimate that right brain can be more activated at the $4,000^{\circ}K$ condition. But we can not find out any different at the $6,000^{\circ}K$ condition. Main cause of no difference from the color temperature was the similarity of color temperature under the general fluorescent lamp. And interface temperature of radiant heat design results LED and PCB was approximately 80 degrees to COMSOL Multiphysics, and changed until approximately 50 degrees until a floor plane of PCB, and verification as arranged chip LED to metal PCB, and it was possible, and a near radiant heat design was confirmed to an approximate value of, as a result, acid manufacture.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.60-74
• /
• 2007

For quantitative analysis of spatio-temporal distribution pattern on marine environment, spatial autocorrelation statistics on the both global and local aspects was applied to the observed data obtained from Gwangyang Bay in South Sea of Korea. Global indexes such as Moran's I and General G were used for understanding environmental distribution pattern in the whole study area. LISAs (local indicators of spatial association) such as Moran's I ($I_i$) and $G_i{^*}$ were considered to find similarity between a target feature and its neighborhood features and to detect hot spot and/or cold spot. Additionally, the significance test on clustered patterns by Z-scores was carried out. Statistical results showed variations of spatial patterns quantitatively in the whole year. Then all of general water quality, nutrients, chlorophyll-a and phytoplankton had strong clustered pattern in summer. When global indexes showed strong clustered pattern, the front region with a negative $I_i$ which means a strong spatial variation was observed. Also, when global indexes showed random pattern, hot spot and/or cold spot were/was found in the small local region with a local index $G_i{^*}$. Therefore, global indexes were useful for observing the strength and time series variations of clustered patterns in the whole study area, and local indexes were useful for tracing the location of hot spot and/or cold spot. Quantification of both spatial distribution pattern and clustering characteristics may play an important role to understand marine environment in depth and to find the reasons for spatial pattern.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.19-19
• /
• 2009

최근, 유한한 에너지 자원의 한계와 지구 온난화 등으로 세계의 제조 산업은 새로운 국면을 맞이하고 있으며, 특히, 자동차 산업은 화석연료를 주 에너지원으로 사용한다는 점과 이 연료를 연소시킬 때 발생하는 이산화탄소가 지구 온난화의 주된 원인이 될 수 있다는 점에서 상기 문제들을 해결하기 위한 다양한 방법에 주목하고 있다. 그 중에서 자동차의 생산기술 측면에서 볼 때, 가장 중요한 이슈는 차체 경량화다. 자동차 차체는 자동차를 구성하고 있는 여러 가지 부품 중에서 약 40% 정도의 무게 비율을 차지하고 있기 때문에, 차체 경량화는 연비향상과 이산화탄소 배출가스 감소와 직접적인 관계를 가지고 있다. 다양한 차체 경량화 방법 중에서 가장 쉽게 접근할 수 있는 방법이 경량소재 적용에 의한 경량화 방법이다. 현재, 탄소섬유 강화 플라스틱과 같이 무게 절감 비율을 최대화 할 수 있는 소재들도 개발되어 일부 적용되고 있지만, 일반적으로 차체 경량화 소재로 가장 널리 사용되고 있는 소재는 알루미늄 합금이며, 이에 대한 차체 적용 비율이 점차로 높아지는 추세에 있다. 이에, 본 연구에서는 알루미늄 합금이 차체에 적용되었을 때의 장단점을 살펴보고, 알루미늄 합금을 적용한 차체 생산과정에서 유의해야 될 사항들과 이를 바탕으로 하는 생산성 극대화 방안에 대하여 고찰하였다. 먼저, 기존의 알루미늄 저항 점 용접공법의 단점을 최소화하고 대량생산 체계에 적합하도록 개발된 새로운 개념의 저항 점 용접 시스템에 대해 그 성능과 양산성을 검증하였다. 구리 전극과 알루미늄 피용접물 사이에 프로세스 테이프를 삽입하여 용접하는 이 시스템은 열전도성이 큰 알루미늄 용접부에서 저전류의 조건에서도 효과적으로 균일한 발열현상이 발생하게 하였으며, 전극 팁 드레싱 없이 모든 용접점이 항상 동일한 조건에서 용접이 이루어질 수 있도록 하였다. 용접 조건 설정에 있어서도 용접전류가 통전되는 순간에 전극 가압력을 자유로이 변형시켜 용접부 크랙 발생을 최소화할 수 있음을 확인하였다. 알루미늄의 또 다른 대표적인 접합방법인 아크용접에 있어서는 용접 입열량을 조절하여 용접변형을 최소화 할 수 있는 아크용접 시스템에 대해 양산성과 적용 타당성을 검토하였다. 와이어 송급 방향을 자유자재로 바꿀 수 있는 이 시스템의 특성에 의해 스패터를 최소화하면서 용융금속이 효과적으로 모재에 금속이행 될 수 있음을 확인하였으며, 판재, 압출재, 및 다이캐스팅재 등 다양한 차체 소재에 대한 용접 가능성 및 미그-레이저 하이브리드 용접과의 비교분석을 통하여 차체 박판 용접에서도 최소의 열변형으로 효과적으로 사용될 수 있음을 보였다.

• Journal of the Korean Society of Radiology
• /
• v.1 no.1
• /
• pp.25-30
• /
• 2007

ROC(Receiver Operating Characteristic)curve is the method that estimate detected insignificant signal from the human's sense of sight, it has been raised excellent results. In this study, we evaluate image quality and equipment character by obtaining a chest image from CR(Computed Radiography) and DDR(Direct Digital radiography) using the human chest phantom, The parameter of exposure for obtaining chest image was 120 kVp/3.2 mAs and the SID(Source to Image Distance) was 180cm. The images were obtained by CR(AGFA MD 4.0 General plate, JAPAN) and DDR(HOLOGIC nDirect Ray, USA). Using some pieces of Aluminum and stone for expressing regions, then attached them on the heart, lung and thoracic vertebrae of the phantom. 29 persons hold radiology degrees were participated in ROC analysis. As a result of the ROC analysis, TPF(true positive fraction) and FPF(false positive fraction) of DDR and CR are 0.552 and 0.474 and 0.629 and 0.405, respectively. By using the results, the ROC curve of CR has higher image quality than DDR. According to the theory, DDR has the higher image quality than CR in chest X-ray image. But, CR has the higher image quality than DDR. quality of DDR inserted the enhance board. The results confirmed that image post-processing is important element decipherment of clinical.

• Korean Journal of Ecology and Environment
• /
• v.50 no.1
• /
• pp.157-168
• /
• 2017

Backswamp is the section of a floodplain where deposits of fine silts and clays settle after a flood. In general, the wetland is composed of diverse ecosystems, and is characterized by ecotone. The purpose of this study was to analyze vegetation naturalness and to assess vegetation value by syntaxonomy and synecology of Useupje backswamp at Yeongsan river. As a result, the vegetation was divided into four physyiognomy types and 14 vegetation units depending on the species composition and habitats. The vegetation units confirmed in the study were as follow: Spirodela polyrhiza community as floating plant; Trapa bispinosa var. inuma community and Trapa bispinosa var. inumai-Nelumbo nucifera community as floating-leaved plant; Paspalum distichum community, Persicaria thunbergii community and Phalaridetum arundinaceae as lentic vegetation in the eulittoral zone; Scirpo fluviarilis-Zizanietum latifoliae and Typha angustata community in the emerged zone; Scirpetum tabernaemontani and Phragmitetum australis in the littoral zone; Carex dimorpholepis-Salix subfragilis community ecotone region of upland. According to the study, the vegetation distribution was highly affected by water level and artificial interference. Moreover, the development of vegetation units showed a significant relationship between species composition and habitats. Although vegetation value of Useupje resulted by vegetation naturalness was identified as the grade [III], the ecological value is expected to upward evaluation because of unique vegetation and geographical location.

• Journal of the Korean Magnetics Society
• /
• v.24 no.4
• /
• pp.123-127
• /
• 2014

We developed a digital 3-axis flux-gate magnetometer for magnetic field signal measurement from warship during demagnetizing and degaussing processes. For the magnetometer design, we considered following points; the distance between magnetic field measurement station and magnetometer located under sea is about several 100 m, the magnetometer is exposed to magnetic field of ${\pm}1mT$ during demagnetizing process, and magnetometer is located under the sea about 30 m depth. To overcome long distance problem, magnetometer could be operated on wide input supply voltage range of 16~36 V using DC/DC converter, and for the data communication between the magnetometer and measurement station a RS422 serial interface was employed. To improve perming effect due to the ${\pm}1mT$ during demagnetizing process, magnetometer could be compensated external magnetic field up to ${\pm}1mT$ but magnetic field measuring rang is only ${\pm}100{\mu}T$. The perming effect was about ${\pm}2nT$ under ${\pm}1mT$ external magnetic field. The magnetometer was tested water vessel with air pressure up to 6 bar for the sea water pressure problems. Linearity of the magnetometer was better than 0.01 % in the measuring range of ${\pm}0.1mT$ and noise level was $30pT/\sqrt{Hz}$ at 1 Hz.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.69-76
• /
• 2009

We report an implementation of the Ground Penetrating Radar (GPR) survey at a site that corresponds to a ruined castle. The objective of the survey was to characterise buried archaeological structures such as walls and tiles in Van Khan Tooril's Ruin, Mongolia, by 2D and 3D GPR techniques. GPR datasets were acquired in an area 10mby 9 m, with 10 cm line spacing. Two datasets were collected, using GPR with 500MHz and 800MHz frequency antennas. In this paper, we report the use of instantaneous parameters to detect archaeological targets such as tile, brick, and masonry by polarimetric GPR. Radar polarimetry is an advanced technology for extraction of target scattering characteristics. It gives us much more information about the size, shape, orientation, and surface condition of radar targets. We focused our interpretation on the strongest reflections. The image is enhanced by the use of instantaneous parameters. Judging by the shape and the width of the reflections, it is clear that moderate to high intensity response in instantaneous amplitude corresponds to brick and tiles. The instantaneous phase map gave information about the location of the targets, which appeared as discontinuities in the signal. In order to increase our ability to interpret these archaeological targets, we compared the GPR datasets acquired in two orthogonal survey directions. A good correlation is observed for the alignments of reflections when we compare the two datasets. However, more reflections appear in the north-south survey direction than in the west-east direction. This is due to the electric field orientation, which is in the horizontal plane for north-south survey directions and the horizontally polarised component of the backscattered high energy is recorded.

• Journal of the Korean Chemical Society
• /
• v.17 no.5
• /
• pp.337-345
• /
• 1973

The nonstoichiometry of the iron oxide system has been studied by analyzing the weight loss of a sample, measured by using a quartz microbalance, in a temperature range from $0^{\circ}C$ to $1200^{\circ}C$ under oxygen pressures from $10^{2}mmHg$ to $10^{-4}mmHg$. The Y values of the formula, $FeO_{1+\gamma}$, that have been obtained by this means for various conditions of temperature and pressure in this range are considered to be more accurate than values obtained by methods requiring thste quenching of the sample before measurements are made. The plots of log Y vs $log PO_2$ (or $log Y =_n log PO_2$) show linearity and n calculated from the slope of the plot is about 1/10 at $1000^{\circ}C$, indicating a difference between the nonstoichiometric and oxidation mechanisms. The condition for the formation of stoichiometric FeO was determined to be $1200^{\circ}C$ under $10^{-3}mmHg$ of $O_2$ and the composition of the oxide under standard conditions was $FeO_{1.11185}$. As in general more oxygen dissolves into the oxide system at lower temperatures and higher oxygen pressures, the deviation from stoichiometric FeO is greater under those conditions. A comparison of the change in conductivity of the sample indicates that full phase transition does not take place with conductivity transition.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.66-66
• /
• 2010

야외지질학습은 교실에서 경험할 수 없는 물질과 현상을 관찰하고 직접 경험할 수 있는 기회를 제공받을 수 있어서 매우 중요하다(Orion 1989). 또한 체험활동으로서 교실에서 학습한 내용의 구체적인 예를 제공하여 교육과정을 촉진시키는데 중요한 요소로 인식되고 있다. 일반적으로 야외 활동은 교실 활동보다 학생들의 경험과 훨씬 더 밀접히 관련되어 있기 때문에 보다 의미가 있을 수 있다. 야외실습 중에서 얻은 경험은 학생들이 그가 관찰한 것에 대해 읽도록 동기화시키고, 교과서와 자연조건에서의 실제적 경험 사이의 차이를 연결해 주는 다리를 제공해 줄 수 있다(홍정수, 장남기, 1997). 야외학습을 위한 적절한 장소는 먼저 학습주제나 목표와 부합되는 곳이어야 하며, 지리적으로 가깝고 안전한 곳이어야 한다(김찬종, 2008). 그렇기 때문에 각 지역별로 학습주제와 부합된 지역을 선정하여 야외지질 학습자료를 개발하는 것은 무엇보다 중요하다. 따라서, 본 연구에서는 전북 남원 일대를 중심으로 한 야외지질 학습자료를 개발하는데 그 목적이 있다. 전북 남원지역은 한반도의 중요지괴에 해당하는 영남육괴 지리산지구에 해당하며 편마암 복합체를 기저로 이를 관입하는 수 차례의 화성활동과 지구조운동으로 복잡한 지질양상을 보인다. 또한 지리산 지역은 평안분지와 경상분지의 일부가 보존되어 있고 지질시대를 달리하는 각종 화성암류가 골고루 분포하여 각 지질시대별로 화성활동과 지구조 운동이 활발했음을 시사해준다. 본 연구에서는 남원 지역의 지질학적 특징을 관찰하기 용이한 지역을 대상으로 총 5곳을 선정하였다. 남원 시내에 소재한 춘향대교 아래 지역은 중생대 쥐라기에 관입한 저반상의 남원화강암과 페그마타이트가 다수 분포하는 곳이다. 이 지역에서는 무수히 많은 관입암체를 찾을 수 있는데 다수의 지진과 지각변동이 있었음을 알 수 있다. 두 번째 장소는 다양한 바위들을 관찰할 수 있는 구룡계곡 일대이다. 이 장소는 오랜기간 동안 물의 흐름에 의해 풍화와 침식을 받은 다양한 크기의 바위를 관찰하고 구별함으로써 풍화에 따른 원마도의 관계, 바위들의 배치 형태를 통해 고지형 및 고수류의 방향을 유추해 볼 수 있다. 남원에서 장수 방향에 위치한 만행산 주변에는 흑운모편마암에 우세한데, 이 지역에서는 흑운모편마암에 나타나는 변성구조로 볼 때 높은 열과 압력을 받은 광역변성작용을 받는 것으로 판단된다. 또한 관입암체 내에 다양한 맥들이 관입을 해와 이를 통해 관입암체들의 상대연령을 판단해보는 학습자료로 활용될 수 있다. 네 번째 장소는 남원시 인월면 인풍리 소재의 인월 피바위 지역이다. 이 지역에서는 압쇄상 화강암이 주로 관찰되는데 이는 기원암인 반상화강암이 동력변성작용을 받아 생성된 것이다. 다섯 번째 지역은 지리산 내의 뱀사골로 지리산 인근에 분포하는 대표적인 편마암인 반상변정질 편마암을 관찰할 수 있다. 변정이란 변성작용을 받는 동안 형성되는 것으로 변성작용을 받는 동안 생긴 것도 있으나 경우에 따라 생성당시 원래 모암속에 포함되어 있는 반정들도 있다.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.3
• /
• pp.117-134
• /
• 2019

This study aims to explore the effects of the parenting education program for high-school maladjusted students. To this purpose, a parenting education program for adolescents developed by the Ministry of Gender Equality and Family(MOGEF) was applied to ten high-school maladjusted students in an alternative(Dae-an) class in Jeju. Findings from class observations and interviews with participants are as follows. First, students with school maladjustment recognized importance and necessity of positive self-concepts and had an opportunity for self-growth through parenting education program. Second, students with school maladjustment obtained understanding about their family of origin and confidence for forming their future families. Third, advance learning about meanings and roles of being a parent provided students with opportunities to know importance of responsible sexual behavior. Fourth, practices of basic care with a replica of a new-born baby enhanced participation and concentration level of students with school maladjustment which became extremely effective in obtaining necessary knowledge for the basic care. Fifth, information provision for parent roles according to children's different developmental levels let students recognize that parent's roles change as their children grow and opened a way to grasp the need of parent education. Sixth, education and repetitive practices on reflective listening helped students enhance communication skills which entailed expanding their human relations. Seventh, passing-down of emotion and understanding on child abuse allowed students recognize risks of child abuse as well as the importance and need of skills for controlling emotion. This study sheds lights on the feasibility and effectiveness of a parenting education program for maladjusted or vulnerable students as an effective program for school drop-out prevention.