• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.560-564
• /
• 2012

This study was undertaken to assess the microbiological quality and prevalence of pathogens in organic vegetables produced in Korea. A total of 189 organically grown vegetable samples (perilla leaf 50, lettuce 50, tomato 39, cucumber 50) were analyzed for the presence of aerobic plate count, Escherichia coli O157:H7, Salmonella spp., Staphylococcus aureus, Listeria monocytogenes, and Yersinia enterocolitica. The total aerobic plate counts were in the range of 4.2 to $7.7log\;CFU\;g^{-1}$ for perilla leaf, 5.0 to $8.0log\;CFU\;g^{-1}$ for lettuce, 4.0 to $7.5log\;CFU\;g^{-1}$ for tomato, and 6.6 to $8.6log\;CFU\;g^{-1}$ for cucumber. The highest counts were found in cucumber. E. coli O157:H7, Salmonella spp., S. aureus, L. monocytogenes, and Y. enterocolitica were not detected from any organically grown vegetable samples. This research suggests that continuous monitoring in organic vegetables is required to improve fresh produce safety.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.3
• /
• pp.244-253
• /
• 2019

Purpose: Total hip arthroplasty was performed using a direct anterior approach (DAA) on an ordinary operation table and a short femoral stem. The clinical radiographic results were evaluated by a comparison with those performed using the modified hardinge (anterolateral approach, ALA) method. Materials and Methods: From January 2013 to November 2015, 102 patients who underwent total hip arthroplasty using DAA (DAA group) and the same number of patients using ALA (ALA group), both performed by a single surgeon, were compared and analyzed retrospectively. The operation time and amounts of bleeding were compared, and the improvement in post-operative pain, ambulatory capacity and functional recovery of the hip joint were checked. The location of insertion of the acetabular cup and femoral stem were evaluated radiologically, and the complications that occurred in the two groups were investigated. Results: The amount of bleeding was significantly smaller in the DAA group (p=0.018). Up to 3 weeks postoperatively, recovery of hip muscle strength was significantly higher in the DAA group (flexion/extension strength p=0.023, abduction strength p=0.031). The Harris hip score was significantly better in the DAA group for up to 3 months (p<0.001) and the Koval score showed significantly better results in the DAA group up to 6 weeks (p≤0.001). The visual analogue scale score improvement was significantly higher in the DAA group by day 7 (p=0.035). The inclination angle (p<0.001) and anteversion angle (p<0.001) of the acetabular cup were located in the safe zone of the DAA group more than in the ALA group, and there was no statistically significant difference in the position of the femur stem and leg length difference. During surgery, two cases of greater trochanter fracture occurred in the DAA group (p=0.155). Conclusion: The DAA performed in the ordinary operation table using a short femoral stem showed post-operative early functional recovery. Because a simple to use fluoroscope was used during surgery with an anatomical position familiar to the surgeon, it is considered to be useful for the insertion of implants into the desired position and for an approach that is useful for the prevention of leg length differences.

• Journal of Food Hygiene and Safety
• /
• v.19 no.4
• /
• pp.185-192
• /
• 2004

Generic HACCP models for bakery products may help HACCP implementation at the wholesale bakery production lines easier. When baking, the internal temperature of bakery products went up to $85^{\circ}C$, which resulted in gelatinization of starch. Considering the characteristics of bakery products, general sanitation control procedures are the main target tool to keep bakery products safe. Monitoring of pathogenic microorganisms at bakery plant environment including production lines was carried out. At the wholesale bakery environment pathogenic microorganisms were detected. It gave a clue that general sanitation control procedures should be implemented for safe bakery products supply. Hazard analysis of raw materials and processing of bakery products, and determination of critical control points and critical limits at the wholesale bakeries lead to present generic model of bakery product HACCP plan. CCPs for the wholesale bakery products may be applied and modified for the implementation of HACCP plan at the wholesale bakery plant.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.257-266
• /
• 2018

This study was carried out to examine comparison of relating influencing factors on medical service satisfaction between general dental patients and orthodontic patients and to improve quality of the medical services by the treatment type of the visit. The data were collected from 421 patients who visited dental clinics and hospitals in Daegu and Gyeongbuk region, using self-administered questionnaire for the period from Sep 1 to Sep 30, 2015. The multiple regression showed that the medical staff and medical fee were common statistically significant independent variables to influence service satisfaction in both groups, however, fear in the treatment was added to statistically significant variables in only the orthodontic patients. Therefore, based on the provision of high - quality medical services and adequate medical care for patients' satisfaction, comprehensive plans including tailor-made counseling management and reducing the fear of dental treatment for general dental patients should be needed.

• Journal of the Korea Convergence Society
• /
• v.11 no.3
• /
• pp.351-360
• /
• 2020

This study was conducted to compare and analyze occupational stress and satisfaction levels of the nurses in two different units to provide data for effective nursing resource management. Survey was conducted in four hospitals in June 2019 and data was obtained from 62 nurses in comprehensive nursing service units (CNSU) and 62 nurses in general units (GU). CNSU nurses had higher level of job satisfaction than GU nurses. Contributing factors included pay, professional status, administration, autonomy, task requirements, and interaction. Job stress level was not significantly different between groups. GU nurses had higher stress levels from nursing practice, conflict with doctors, and patients and caregivers, while CNSU nurses had higher stress levels in working condition. Negative correlation was found between job satisfaction and stress in GU nurses, whereas not in CNSU nurses. Clear definition of task, smaller work load, appropriate reward, and educational support is suggested to enhance job satisfaction.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.4
• /
• pp.551-561
• /
• 2024

This study is a descriptive research study to identify the factors affecting the quality of professional life for nurses caring for COVID-19 patients. From April 10, 2023 to April 28, 2023, data were collected from 145 nurses caring for COVID-19 patients in three designated COVID-19 hospitals in G-do using a questionnaire. Descriptive statistics, t-test, one-way ANOVA, Pearson's correction coefficient, and hierarchical regression analysis were used using the SPSS 25.0 program. As a result of analyzing the factors affecting the quality of professional life of nurses caring for COVID-19 patients, resilience (β=.49, p<.001) and job stress (β=-.36, p<.001) were found, and the explanatory power of the model was 53.7% (F=32.20, p<.001). As a result of this study, in order to improve the quality of professional life of nurses caring for COVID-19 patients, concrete measures to reduce job stress and improve resilience should be sought.

• Journal of the Korea Convergence Society
• /
• v.8 no.1
• /
• pp.51-59
• /
• 2017

It is to establish preliminary data about healthcare convergencr of infection control by performing a bacterial contamination test for CT scanner as well as general radiographic systems in the emergency rooms of general hospitals. The period was December 1 ~ December 31, 2015. It is detect in the emergency rooms of 7 medical facilities including 2 in Seoul, and 1 in Gyeonggi-do Province, and 2 in Jeonla-do Province, and 2 in Chungcheong-do Province. The surface contamination strains detected from CT scanner in the radiology department emergency rooms were Micrococcus species(4,5%), Stenotrophomonas maltophilia(9%), Enterococcus faecium(4.5%), Providencia stuartii(4.5), and Gram negative bacilli(4.5%). Also, the surface contamination strains detected from general radiographic system in the radiology department emergency rooms were Providencia stuartii(11%), Klebsiella pneumonia(3.5%), Stenotrophomonas maltophilia(11%), Pantoea species(11%), Acinetobacter baumannii(3.5%), Micrococcus species(3.5%), Escherichia coli(3.5%), Enterobacter species(3.5%), and Gram negative bacilli(11%). Considering that the regions of most detection were all the places closely related to patients, radiologists would have to thoroughly clean with alcohol before and after a test.

• Culinary science and hospitality research
• /
• v.21 no.2
• /
• pp.1-10
• /
• 2015

The purpose of this study was to establish the critical limit of CCP (Critical Control Point) of a HACCP (Hazard Analysis Critical Control Point) system used in the production of seasoned laver products. The hazard analysis examined microbial evaluations and developed a HACCP management plan for the heating process. The results were determined to be capable of reducing the biological element of CCP via the secondary roasting process. This study examined general bacteria and pathogenic microorganisms such as Escherichia coli, Staphylococcus aureus, Salmonella spp., Listeria monocytogenes, Vibrio parahaemolyticus, and Bacillus cereus at temperatures ranging from $170^{\circ}C$ to $230^{\circ}C$ and for 3.0 to 5.5 seconds at a time. Before the secondary roasting process, pathogenic microorganisms were all negative, although the presence of general bacteria was still detected. General bacteria was reduced to $1.0{\times}10CFU/g$ after the temperature was set at $230^{\circ}C$ for a period of 5.5 seconds. In conclusion, it suggested that a HACCP plan was necessary for management standard and systematic approach in the establishment of critical limit, problem resolution, verification method, education, and records management through a secondary roasting process.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.354-365
• /
• 2016

The purpose of the study was to identify and compare levels of recognition of empowerment, job satisfaction, organizational commitment between Advanced Practice Nurses(APN) and Registered Nurses(RN) of hospitals. Data collection was done by the 85 APN and 120 RN of six large hospitals, four medium sized hospitals in Seoul and Incheon. T-test and ANOVA using SPSS 18.0 were performed. There were no significant differences of empowerment between APN($3.56{\pm}0.53$) and RN($3.50{\pm}0.54$)(t =-. 861, p = 0.390). job satisfaction between APN($3.36{\pm}0.53$) and RN($3.25{\pm}0.46$)(t =- 1.575, p = 0.117), organizational commitment between APN($3.11{\pm}0.34$) and RN($3.05{\pm}0.36$)(t =- 1.301, p = 0.195). Empowerment, job satisfaction, organizational commitment of APN and RN showed no significant differences. There are some reasons why it resulted in no significant difference between APN and RN. APN's role in Korea is not clearly established and distinguished from RN, lack of appropriacy of employment and reward, and lack of the institutional foundation for APN's operation and efficiency.

• Journal of radiological science and technology
• /
• v.40 no.3
• /
• pp.433-441
• /
• 2017

The 3D printing selective laser sintering (SLS) and stereo lithography apparatus (SLA) method used for bone model production has good precision and resolution, but the printers are expensive and need professional knowledge for operation. The program that converts computed tomography digital imaging and communications in medicine (DICOM) file into STL (stereolithography) file is also expensive so requesting 3D printing companies takes a lot of time and cost, which is why they are not generally utilized in surgery. To produce bone models of fractured patients, the use of 3D imaging conversion program and 3D printing system should be convenient, and the cost of device and operation should be low. Besides, they should be able to produce big size bone models for application to surgery. Therefore, by using an fused deposition modeling (FDM) method 3D printer that uses thermoplastic materials such as DICOM Viewer OsiriX and plastic wires, this study developed 3D printing system for Fracture surgery Patients customized bone model production for many clinics to use for surgery of fracture patients by universalizing with no limit in printing sizes and low maintenance and production cost. It is expected to be widely applied to the overall areas of orthopedics' education, research and clinic. It is also expected to be conveniently used in not only university hospitals but also regular general hospitals.