• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.28-32
• /
• 2003

As part of studies on the high quality dunggule tea, made of Polygonatum odoratum root with different growth year were analyzed for their flavor compounds. The quality attributes related to flavors were compared between raw and roasted samples which were treated at $130^{\circ}C$ for 15 min. Free sugars in the roots were mainly composed of fructose ($3.59{\sim}4.83%,\;d.b.$), sucrose ($1.78{\sim}2.49%$), and glucose ($1.60{\sim}1.80%$). Threonine ($1,239{\sim}1,444\;mg/100g,\;d.b.$), arginine ($589{\sim}689$), histidine ($289{\sim}370$) were three major free amino acids. The root grown for three years showed the highest content in total free sugar and amino acids (p<0.05). There was negligible difference in proximate composition and Hunter's color parameter depending on the growth year of the roots. However, sensory scores on color, taste and aroma were highest in 3 years' root, which is found most suitable for the preparation of dunggule tea. The roasting of 3 years old root significantly reduced the content of fructose and sucrose (p<0.01). It caused most apparent changes in the decreasing amount of threonine and in the decreasing rate of lysine, showing the significant decrease in total free amino acid content (p<0.01).

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.704-709
• /
• 2002

To improve the mechanical properties of $Al_2$O$_3$/ZrO$_2$composites, the homogeneous dispersion of ultra low size ZrO$_2$ particles in $Al_2$O$_3$ceramics have been controlled by coprecipitation method. In case of mechanical mixing of ZrO$_2$ powders with $Al_2$O$_3$, homogeneous dispersion and controlling the ZrO$_2$ size were relatively difficult due to high sintering temperature. So nanosized Zr hydroxide was coprecipitated from ZrOCl$_2$/Y(NO$_3$)$_3$ solution with commercial sub-micron sized $\alpha$-alumina (Sumitomo : AES-11(0.4 ${\mu}{\textrm}{m}$)) and high purity ultra low sized $\alpha$-alumina (Taimei Chemical (0.22 ${\mu}{\textrm}{m}$)) for low temperature sintering. By this partial coprecipitation method, relatively low sized ZrO$_2$ dispersion in $Al_2$O$_3$/ZrO$_2$ composites was achieved at 150$0^{\circ}C$-1$600^{\circ}C$ of sintering temperature range and their mechanical properties were measured.

• Food Science and Preservation
• /
• v.21 no.5
• /
• pp.636-645
• /
• 2014

Quality changes in frankfurter sausages with yam (Dioscorea japonica) powder added were investigated during their storage at $10^{\circ}C$ for six weeks. The sausage samples were prepared using four concentrations of yam powder: 0% (C), 0.5% (T1), 1.0% (T2), and 2.0% (w/w) (T3). After the addition of yam powder, the crude protein contents decreased, but the crude fat and carbohydrate contents increased. The thiobarbituric acid values during the storage of the frankfurter sausages were lower in the samples with higher yam concentrations. Over the storage period, the volatile basic nitrogen values increased with the increase in the amount of added yam. With the increase in the yam concentration, the $L^*$ and $a^*$ values tended to decrease, whereas the $b^*$ value increased. The instrumental texture analysis showed that the hardness value decreased with the increase in the yam concentration. The first indication of sensorial quality deterioration was noticed at week 4 for T3 and at week 5 for C, T1, and T2. In conclusion, the quality and shelf-life of the frankfurter sausages were not noticeably influenced by the addition of yam powder with a concentration of up to 1.0% (w/w), but the functional and health-promoting effects of yam were positively incorporated.

• Korean journal of food and cookery science
• /
• v.22 no.6 s.96
• /
• pp.849-854
• /
• 2006

The objective of this study was to evaluate the quality characteristics of Dotoridasik prepared by the addition of acorn powder (0%, 20%, 40%, 60%, 80%). The Proximate components were 85.89% carbohydrate, 1.38% crude fat, 0.84% crude protein and 0.32% crude ash. The moisture content of Dotoridasik showed no significant difference between the added acorn powder and control groups. The following Hunter color values are not part of the sensory evaluation testing in the results of for Dotoridasik, decreased while the a and b values increased with increasing acorn powder addition. The bitter taste was evaluated as being improved with increasing acorn powder addition. Dotoridasik with 40% acorn powder showed the highest acceptance. In the mechanical evaluation, hardness recording which from control Will increase with acorn powder it shows a high shame(p<0.05), the adhesiveness result springiness it was not visible a consider difference especially also utterly unintelligible).

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.3
• /
• pp.77-87
• /
• 2001

Composting is a cost-effective and environmentally-sound technology to treat soils contaminated with hazardous organic pollutants. Pollutants to be treated are as follows: explosives, phenolic compounds, PAHs, petroleum hydrocarbons, pesticides, and etc. Composting systems are windrow, static pile, and in-vessel. Design and operational parameters of composting are aeration modes, temperature, moisture content, nutrient supplement, amendment added, and etc. Appropriate oxygen concentration of composting for contaminated soils are 5~15%, while some compounds are degraded well at the low $O_2$ concentration of 2~5%. The most diverse microorganisms live in the temperature of $25{\sim}40^{\circ}$. 50~90% of the soil field capacity is the moisture content not to make a problem in composting. Assuming a bacterial chemical equation is $C_{60}H_{87}O_{23}N_{12}P$, theoretical C : N : P from bacterial chemical portion is approximately 20 : 5 : 1. It should be noted that the ratio does not apply to the total organic carbon measured in a waste because not all carbon metabolized by bacteria is synthesized to new cellular material. Initial C/N ratio of 25~40 is optimum. It is more economical to recycle soils or composts than to add commercial microbes.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.110-110
• /
• 2016

금속재료 중 철강은 기계적 성질이 우수하고 대량생산에 의한 뛰어난 경제성을 가지기 때문에 다양한 산업 분야에서 널리 사용되고 있다. 그러나 스테인리스강 등과 같은 일부 특수한 용도의 강을 제외하고는 부식 환경에 취약하기 때문에 그 용도에 따라 표면처리를 함으로서 내식특성을 부여하고 있다. 일반적으로 이러한 철강재료에 대한 부식문제를 해결하기 위한 방법으로는 습식프로세스 중 아연(Zn)도금이 사용되는데, 아연은 그 자체가 보유하고 있는 차폐(barrier)효과는 물론 상대적으로 이온화 경향이 크기 때문에 철에 대하여 전자를 공급하는 희생양극적(Sacrificial anode)역할을 하여 철을 방식하는 원리를 가지고 있다. 하지만 최근에 이르러 기존의 도금 프로세스 처리된 제품의 사용 및 적용분야가 확대되고 가혹해 짐에 따라서 내식성 향상을 위한 새로운 재료 및 신기술 개발이 요구되고 있는 실정이다. 본 연구에서는 친환경 프로세스 방법인 PVD법 중 하나인 스퍼터링(Sputtering)을 이용하여 0.8mm 두께의 냉연강판 (cold rolled steel) 상에 Al에 대한 Mg 함량을 10~30wt.%로 하여 약 $5{\mu}m$ 두께의 막을 제작하였다. 이때 20wt.% 막의 경우 공정압력조건을 증가시켜 증착 막의 결정배향성을 변화시켰다. 뿐만 아니라 제작된 막들에 대해서 $400^{\circ}C$온도에서 10분간 열처리함으로서 코팅막의 성분변화에 따른 영향을 살펴보기 위해 시편을 추가 제작하였다. 이와 같이 제작된 막들에 대한 형성메커니즘과 내식성의 상관관계 해명을 위해 막의 조성분포, 표면 및 단면의 모폴로지 관찰 및 결정구조 등 재료특성분석과 더불어 염수분무(Salt spray test), 침지시험 그리고 양극분극 시험 등을 통해 내식성 평가를 진행하였다. 이상의 종합적인 결과를 살펴보면 제작된 Al-Mg 막은 마그네슘 함량비 및 열처리 조건에 따라 조성분포와 막의 모폴로지 및 결정배향성이 변화한다는 것을 알 수 있었는데, 마그네슘 함량이 증가하고 열처리한 막의 내식성이 가장 양호한 것으로 나타났다. 이것은 Al-Mg 성분이 표면을 중심으로 균일 분산-분포하며, Al에 대한 Mg의 고용으로 인해 안정적으로 형성된 부식생성물과 금속화합물의 단계적 반응 효과에 의해 차폐효과와 희생양극적 특성이 동시에 향상되었기 때문으로 생각된다. 한편 공정 압력을 증가시켜 형성한 막은 결정학적 구조에서 보다 높은 표면 에너지와 증가한 격자 정수에 의해 Mg이 부식환경에서 빠르게 반응하여 안정적 피막을 형성하기 때문에 내식성이 향상된 것으로 보여 진다. 이상의 연구를 통해서 고내식성을 Al-Mg막의 유효성 확인하였으며, 설계에 대한 기초적인 응용지침을 제시할 수 있을 것으로 사료된다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.2
• /
• pp.228-232
• /
• 2007

The purpose of the study was to investigate the quality characteristics of Jeju island's indigenous pork fed with citrus byproducts. Samples were the Jeju island's indigenous pork loin without citrus byproduct (JNP-0) and the Jeju island's indigenous pork loin fed with 8% and 15% citrus byproducts during growing and fattening periods (JNP-1). The pH, VBN content, bacterial counts, L* value, frozen loss, thawing loss, water boiling loss, hardness, springiness, cohesiveness, chewiness, and shear force value were not significantly different between JNP-0 and JNP-1 (p<0.05). The TBARS, a* value, b* value, water holding capacity, and pan boiling loss of JNP-0 were significantly higher than those of JNP-1 (p<0.05), but the gumminess of JNP-1 was significantly higher than that of JNP-0 (p<0.05). For sensory characteristics, taste, flavor, juiciness, and palatability were not significantly different between JNP-0 and JNP-1, but tenderness of JNP-1 was sig-nificantly higher than that of JNP-0 (p<0.05).

• Culinary science and hospitality research
• /
• v.19 no.3
• /
• pp.142-155
• /
• 2013

This study investigates perilla seed powder substituted for wheat flour in bread recipes with the amounts of 0%(control), 5%, 10%, 15%, and 20%. Perilla seed powder consists of 9.41% of moisture content, 9.14% of crude protein, 1.12% of crude fat, and 2.97% of crude ash. Sedimentation value and pelshenke value have decreased as the perilla content increased. The farinograph measurement result of the bread made with perilla seed powder showed that consistency, water absorption and tolerance index have increased as the perilla content increased. The amylograph measurement result of the bread made with perilla seed powder showed that T, P, H, F, P-H and F-H have decreased as the perilla content increased. Baking loss and specific loaf volume have decreased as the perilla content increased. The chromatic 'L' and 'b' values were reduced as more perilla was added to more pan bread, while the chromatic 'a' value increased. The texture measurement result showed that the hardness of bread have increased as the ingredient contents increased. Their cohesiveness, spinginess, and chewiness have decreased as the ingredient contents increased. Overall preference scores showed a high preference for the bread made with 15% perilla seed powder.

• Culinary science and hospitality research
• /
• v.19 no.3
• /
• pp.130-141
• /
• 2013

In this study, the mechanical and sensory quality characteristics of bar rice cake, Gareadduk, have been measured from the reference group and the sample groups with 10%, 20% 30% and 40% of defatted rice, containing high dietary fiber. From the general properties of rice powder and defatted rice, the crude protein, crude fat and crude ash of defatted rice were higher than those of rice powder, and especially dietary fiber content of defatted rice was 24.6%, 7-8 times higher than that of rice powder. The moisture content of Gareadduk has declined with increased mixing rate of defatted rice. According to the chromatography test result, its brightness, L-value has declined with increased mixing rate of defatted rice while there was no significant difference for different storage periods. Its redness, a-value, has declined with increased mixing rate of defatted rice and longer storage periods. Its yellowness, b-value, has inclined with increased mixing rate of defatted rice and longer storage periods, which showed no significant difference. Its hardness has significantly increased with increased mixing rate of defatted rice. Also, its hardness has gradually increased with longer storage periods. From the elasticity and viscosity test result, there was no specific tendency, but the chewiness of the sample groups was higher than that of the reference group. The sensory test result showed that the colour and scent of bar rice cake, Gareadduk, were getting stronger with increased mixing rate of defatted rice. The taste of the sample groups was stronger than that of the reference group, and the overall acceptability of the sample groups showed the order of 20%> 30%> 40%> 10%.

• Journal of the Korean Geosynthetics Society
• /
• v.1 no.1
• /
• pp.13-21
• /
• 2002

Geotextile tubes hydraulically or mechanically filled with dredged materials have been applied in hydraulic and coastal engineering in recent years(detached breakwater, groins and jetty). The geotextile tubes are made of sewn geosynthetics sheets. If the sandy soil is use to fill material, these inlets should be spaced closely to assure uniform filling of the tubes because sandy soil and geosynthetic is very pervious. However, the clayey soil or contaminated slurry is used, the inlets can be located relatively long distance. The fine clayey particles tend to rapidly blind the fabric slowing down water escape through the geotextile. This paper presents a field test result of a geotextile tube in the land reclamation project for the Songdo New City construction site. The dredged silty clay was dredged by the dredging ship and hydraulically pumped into the geotextile tube. The height of geotextile tube was measured at every filling stage and also measured width and diameter of geotextile tube with the elapsed time. Based on the test results, if the clayey filling material is used, the pumping step must be divided 3~4 stages for drainage and sediment. After complete drainage, the height of the geotextile tube reduces by approximately 50%.