• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.6
• /
• pp.359-366
• /
• 2023

Changes in microstructure and mechanical properties of Mg-1.0Al-1.0Zn-0.2Mn-0.5Ca (AZMX1100) alloy sheet manufactured by normal casting and twin roll casting process, were studied according to process and heat treatment. Non-uniform microstructure was observed in the initial sheet produced through both processes, and in particular, tilted dendrites and shifted central segregation were observed in the twin roll casting sheet. It was homogenized through hot rolling and heat treatment, and heat treated at 350℃ and 400℃ to compare the effect of heat treatment temperature. Both sheets were homogenized by the hot rolling process, and the grain size increased as the heat treatment temperature and time increased. It was confirmed that the grain size, deviation, and distribution of the second phase were finer and more homogenized in the TRC sheet. Accordingly, mechanical properties such as hardness, formability, and tensile strength also showed better values. However, unlike other previously reported AZMX alloy systems, it showed low formability (Erichsen value), which was judged by the influence of Al2Ca present in the microstructure.

• Journal of the Korean Institute of Gas
• /
• v.28 no.1
• /
• pp.59-64
• /
• 2024

In this study, we conducted research on a miniaturized transmission system suitable for ultra-compact electric vehicles, such as electric arts or small electric cars. While conventional electric vehicles eliminate multi-gear transmissions and control motor output or secure initial driving force through reducers, in vehicles like electric karts or compact electric cars, which have relatively small battery capacities, the driving range can be reduced or the motor can be stressed epending on the loading state. Therefore, in this study, we developed a low stage ratio 0.625 and high stage ratio 1.6 a two-stage transmission system that can change gears as needed, considering factors such as slope conditions and loading status, by applying the continuously variable transmission (CVT) mechanism. Based on the selected gear ratios, we designed the transmission and created a test rig to verify the power transmission efficiency of the developed transmission. Using the test rig, we varied the rotational speed and load of the transmission to confirm its power transmission characteristics and also examined the heat generation characteristics during shifting and operation. As a result, developed a two-stage transmission with a CVT structure.

• Journal of the Korea Computer Graphics Society
• /
• v.30 no.3
• /
• pp.1-8
• /
• 2024

We present a novel algorithm for creating 2D maps tailored for autonomous navigation within orchards. Recognizing that fruit trees in orchards are typically aligned in rows, our primary goal is to accurately detect these tree rows and project this information onto the map. Initially, we propose a simple algorithm that recognizes trees from point cloud data by analyzing the spatial distribution of points. We then introduce a method for detecting fruit tree rows based on the positions of recognized fruit trees, which are integrated into the 2D orchard map. Validation of the proposed approach was conducted using real-world orchard point cloud data acquired via LiDAR. The results demonstrate high tree detection accuracy of 90% and precise tree row mapping, confirming the method's efficacy. Additionally, the generated maps facilitate the development of natural navigation paths that align with the orchard's layout.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.5
• /
• pp.109-115
• /
• 2008

As structures are getting super-rise and large-sized, introducing the construction methods such as prefabrication of bar-meshes and complex method are being actively discussed to pursue the high quality of reinforced concrete, the simplification of field works, and the reduction of duration, as well as the study on how to connect reinforcing rods, which occurs while applying the same methods, is in progress Also, the pressure welded joint is a kind of method that heats the ends of reinforced bars locally and joint them, and after the pressure welding, the vulnerable part in the reinforced bar occur. Thus, in the construction field, the throughout quality control is necessary because of the delayed duration and the lowered construct ability. In this study, of the traditional lap splice method and the mechanical splice one, the screw coupler, we tried to look into through experiments the prefabrication method of bar-meshes, a typical joint method usually used for the joint parts for PSC structures applying the reinforced bar with its big diameter, and a newly-developed up-set coupler method. And we also examined the characteristic of tensile.

• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.273-283
• /
• 2024

As the adverse environmental impacts due to plastic waste become more severe, there is an increasing demand for developing a sustainable ecosystem using biodegradable polymers. Biodegradable polymers are those that can be biochemically decomposed through the enzymatic activity of microorganisms. Currently, a variety of biodegradable polymers with varying properties is being investigated. In particular, polymer blends with an aim to control the biodegradation rate and mechanical properties are under active research. The biodegradable polymer industry, which has not yet reached economies of scale, does not have a cost advantage compared to petroleum-derived polymers. To overcome this challenge, there is an urgent need to expand its application fields to various high-value industries (separators, electronic materials, and medical fields). This review summarizes the current state-of-the-art biodegradable polymers, polymer blends, and recent research trends in new niche applications.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.4
• /
• pp.1-10
• /
• 2011

This study was conducted to compare the growth of Zoysia japonica depending on different soil treatments in Saemangeum sea dike, which is filled with dredged soil. Zoysia japonica was planted using sod-pitching method on the control plot. On plots which were treated with forest soil and soil improvement, Zoysia japonica seeds were sprayed mechanically. Sixteen months after planting, coverage rate, leaf length, leaf width, and root length were measured and analyzed. Also, three Zoysia japonica samples per plot were collected to analyze nutrient contents. Coverage rate was 100% in B treatment plot(dredged soil+$40kg/m^3$ soil improvement+forest soil), in C treatment plots (dredged soil+$60kg/m^3$ soil improvement+forest soil), and D treatment plots (dredged soil+$60kg/m^3$ soil improvement), while only 43% of the soil surface was covered with Zoysia japonica on control plots. The width of the leaf on C treatment plots (3.79mm) was the highest followed by D treatment (3.49mm), B treatment (2.40mm) and control plots (1.97mm). Leaf and root length of D treatment was 30.18cm and 13.18cm, which were highest among different treatments. The leaf length of D treatment was highest followed by C, B, and A treatments. The root length of D treatment was highest followed by C, A, and B treatments. The nitrogen and phosphate contents of the above ground part of Zoysia japonica were highest in C treatment, followed by D, B, and A treatments. The nitrogen and phosphate contents of the underground part of Zoysia japonica were highest in D treatment, followed by C, A, and B treatments. C and D treatments showed the best results in every aspect of grass growth. The results of this study could be used to identify the cost effective way to improve soil quality for soil surface fixation on reclaimed areas using grass species.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.6
• /
• pp.1252-1264
• /
• 1998

Background : Patients with established ARDS have a mortality rate that exceeds 50 percent despite of intensive care including artificial ventilation modality, Mortality has been associated with sepsis and organ failure preceding or following ARDS ; APACHE II score ; old age and predisposing factors. Revised ventilator strategy over last 10 years especially at ARDS appeared to improve the mortality of it. We retrospectively investigated 40 ARDS patients of respiratory-care unit to examine how these factors influence outcome. Methods : A retrospective investigation of 40 ARDS patients in respiratory-care unit with ventilator management over 46 months was performed. We investigated the clinical characteristics such as a risk factor, cause of death and mortality, and also parameters such as APACHE II score, number of organ dysfunction, and hypoxia score (HS, $PaO_2/FIO_2$) at day 1, 3, 7 of severe acute lung injury, and simultaneously the PEEP level and tidal volume. Results : Clinical conditions associated with ARDS were sepsis 50%, pneumonia 30%, aspiration pneumonia 20%, and mortality rate based on the etiology of ARDS was sepsis 50%, pneumonia 67%(p<0.01 vs sepsis), aspiration pneumonia 38%. Overall mortality rate was 60%. In 28 day-nonsurvivors, leading cause of death was severe sepsis(42.9%) followed by MOF(28.6%), respiratory failure(19.1 %), and others(9.5%). There were no differences in variables of age, sex, APACHE II score, HS, and numbers of organ dysfunction at day 1 of ARDS between 28-days survivor and nonsurvivors. In view of categorized variables of age(>70), APACHE II score(>26), HS(<150) at day 1 of ARDS, there were significant differences between 28-days survivor and nonsurvivors(p<0.05). After day 1 of ARDS, the survivors have improved their APACHE II score, HS, numbers of organ dysfunction over the first 3d to 7d, but nonsurvivors did not improve over a seven-day course. There were significant differences in APACHE II score and numbers of organ dysfunction of day 3, 7 of ARDS, and HS of day 7 of ARDS between survivors and nonsurvivors(p<0.05). Fatality rate of ARDS has been declined from 68% to less than 40% between 1995 and 1998. There were no differences in APACHE II score, HS, numbers of organ dysfunction, old age at presentation of ARDS. In last years, mean PEEP level was significantly higher and mean tidal volume was significantly lower than previous years during seven days of ARDS(p<0.01). Conclusions : Improvement of HS, APACHE II score, organ dysfunction over the first 3d to 7d is associated with increased survival Decline in ARDS fatality rates between 1995 and 1998 seems that this trend must be attributed to improved supportive therapy including at least high PEEP instead of conventional-least PEEP approach in ventilator management of acute respiratory distress syndrome.

• Korean Journal of Food Science and Technology
• /
• v.42 no.2
• /
• pp.233-239
• /
• 2010

This study was conducted to examine the anticancer activities of Berberis koreana extracts according to different extraction processes. The highest extraction yield obtained was 8.26% following extraction by ultrasonification at 60 kHz and $60^{\circ}C$ followed by high pressure at 500MPa. Generally, the extracts from the ultrasonification process showed relatively low cytotoxicities against the human normal cell line, HEK293 showing as low as 15%. This extract inhibited the growth of the digestive related organs cell lines, human stomach adenocarcimoma cell and human epithelial adenocarcinoma cell by up to 80% when administered at 1.0 mg/mL, and showed 2.5-3.5 of selectivity. It was also found that this extract induced the production of nitric oxide levels as high $37.87\;{\mu}M$ from macrophages. For the in vivo experiment using ICR mice, the total serum IgG levels of mice treated with B. koreana extracts from ultrasonification extraction were increased by up to 57 ng/mL. The survival time of this group was longer than that of the other group after the injection of Sarcoma-180 and the increment of their body weights was also greatly suppressed. In addition, the extract showed the highest tumor inhibition activities, leading to a reduction of 78.47%. These results indicate that the highest activities of B. koreana associated with this extraction process can be significantly improved.

• Journal of the East Asian Society of Dietary Life
• /
• v.12 no.2
• /
• pp.91-99
• /
• 2002

This study was carried out to develop a diabetic-oriented convenience flood using 7 medicinal plants (Schisandra chinensis, Coix lachryma-jobi, Dioscorea batatas, Ophipogon japonicus, Lyicium chinense, Houttuynia cordata, Polygonatum sibiricum) and chicken. Portion size was 310g, total calorie was 551.6 kcal and carbohydrate, lipid and protein were consisted of 53.0%, 20.9% and 26.1%, respectively. Calcium, zinc and iron content were 268.9mg, 5.4mg and 6.1mg, respectively. Crude fiber content was 22.9g. In sensory evaluation, the scores of taste, color, texture and overall acceptability were higher than normal diabetic meal. Hypoglycemic effect of the device meal for diabetic persons was excellent compared to that of normal diabetic meal. The above results indicate that the 7 medicinal plants can be used as functional ingredients fur diabetic-oriented convenience flood industry. Also, device meal can be used as ready-prepared food for weight control.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.68-87
• /
• 1982

In Korea, this is the situation at moment that the total demand of timber in 1972 is more than 5 million cubic meters. On the other hand, however, the available domestic supply of timber at the same year is only about, 1 million cubic meters. A great unbalancing between demand and supply of timber has been prevailing. To solve this hard problem, it has been necessitiated to build up the forest stocks as early as possible with fast grown species such as poplar. Under circumstances, poplar plantations which have been carryed on government and private have reached to large area of 116,603 hectors from 1962 up to date. It has now be come a principal timber resources in this country, and required the basic study on various properties of wood for it's proper utilization, since it has not been made of any systematic study on the properties of Populus grown in Korea. In order to investigate the properties such as anatomical, physical and mechanical properties of nine different species (P. euramericana Guiner I-214. P. euramericana Guiner I-476, P. deltoides Marsh, P. nigra var. italica (Muchk) Koeme, P. alba L.,P. alba $\times$ glandulosa P. maximowiczii Henry, P. koreana Rehder, P. davidiana Dode) of poplar for their proper use and development of new ways of grading processing and quality improving, this study has been made by the Forest Research Institute.