• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.312-312
• /
• 2010

모터나 기계류와 같이 주변에서 발생하는 미활용 진동에너지를 전기에너지로 수확하기 위한 Piezoelectric Energy Harvester를 개발하고자 하였다. PZT-5H의 조성으로 후막세라믹 적층 구조 캔틸레버 타입의 압전시트를 통해 압전 에너지 하베스터를 제작하였다. 일반적으로 진동에너지를 수확하여 전기에너지로 변환시키는 압전 에너지 하베스팅 기술은 에너지 효율이 낮은 문제점을 가지고 있으므로 에너지 효율을 높이기 위한 방법으로 본 연구에서는 Unimorph 와 Bimorph 타입의 캔틸레버의 가로, 세로, 두께, 재료변수에 따라 발생하는 최적의 효율을 가지는 구조를 찾고자 하였다. 캔틸레버 각 변수에 따른 공진주파수 대역에서 발생하는 전압을 분석하여 50Hz의 공진주파수를 가지는 60*35*0.2mm의 캔틸레버를 설계하였다. 시뮬레이션을 통해 얻어진 결과를 실험적으로 검증하기 위해 전력량을 측정한 결과, Bimorph는 Unimorph 타입에 비해 2배가량의 향상된 발전특성을 가지며 에너지 하베스터에서 초당 $76.2\;{\mu}W$의 전력량을 가지는 것을 확인하였고 시뮬레이션 결과와의 타당성을 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.24-24
• /
• 2010

대형구조물의 구조안정성 진단, 로봇과 같은 지능기계의 제어, 환경오염을 감지하기 위한 센서의 중요성은 날로 증대되고 있다. 이러한 센서의 감도와 성능을 높이기 위해서 소형화, 다기능화, 집적화가 요구되고 있는데, 고성능 센서소자들의 집적화를 위해서 기존에 적용된 벌크형태의 재료들을 박막화하여 다층적층 및 소형화할 필요가 있다. 집적화 센서의 구현에 있어서 전극박막은 센서의 특성을 좌우하는 중요한 역할을 한다. 일반적으로 금속박막이 전극으로 사용되고 있으나 열적 불안정성 및 박리현상의 문제점을 지니고 있다. 따라서 이를 해결하기 위해 전도성산화막을 전극으로 적용하고자하는 연구가 요구되고 있다. 전도성산화막을 전극으로 적용하면 센서소자의 성능이 개선되는 경향이 있다. $Sr_2FeMoO_6$(SFMO) 산화물은 자기장을 인가했을 때 저항이 감소하는 CMR(colossal magnetoresistance) 물질이며 상온비저항이 낮은 것으로 알려져 있다. 이중 페롭스카이트 (double perovskite) 구조를 갖는 $Sr_2FeMoO_6$ 박막은 센서소자의 전극으로 적용 가능할 것으로 생각되어 박막을 제조하고자 하였으며 미세구조와 전기전도 특성을 조사하였다. 박막제조를 위해서는 RF 스퍼터법을 사용하였다. 스퍼터를 위한 타겟은 고상반응법으로 분말타겟을 제조하였다. Ar/$O_2$ 가스 유랑변화, 압력변화, 기판 온도변화가 박막의 상형성 등 박막특성에 미치는 영향을 조사하였다. 기판으로는 $SiO_2$(100nm)/Si 기판을 사용하였다. 증착직후에는 비정질막이 얻어졌으며 SFMO 상을 만들기 위해서는 후열처리가 필요하였는데, 환원성 가스 분위기 [$H_2$(5%)/Ar] 에서 열처리 조건을 최적화하여 이중 페롭스카이트 구조의 단일상 박막을 제조할 수 있었다. SFMO 단일상 박막은 증착시에나 후열처리 시 산소의 억제가 중요함을 알 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.14-18
• /
• 2006

Optical interferometer is used for various optical measurement fields in optical metrology and biomedical measurements. In an optical interferometer, optical delay line has to change the optical path length of a reference arm to match with that of a sample in and it's speed was limited by reference arm movement speed. In this paper, we proposed an all-fibered RSODRapid Scanning-speed Optical Delay) without any mechanical movement, and we applied this system to optical interferometer. Experimental setup is consist of pulse laser source (center wavelength 1304nm, pulse width 30ps, repetition rate 10GHz), two phase modulators and dispersive shifted fiber. As experimental results, we obtain the maximum time delay of 11ps at 10MHz repetition rate, and it is easily tuneable the time delay by modulation frequency and modulation voltage.

• Korean journal of applied entomology
• /
• v.34 no.4
• /
• pp.295-299
• /
• 1995

This study was conducted to find the control methods, status of overwintering and seasonal occurrence of Erioccoccus largerstroemiae on persimmon trees in Ch'ondo area, Kyongbuk province in Korea. Usually, overwintering eggs were sheltered in bark, among them the rate of alive eggs was 28.7%. The activiation of garpe-myrtle scale showed from late April, and they have three generations per year. The first occurrence of larval stage of Erioccoccus largerstroemiae starts from late June to early July, the second occurrence begins from middle August to late August, and from late June to early July, the second occurrence begins from middle August to late August, and from middle September to late September is the third, thus, three peaks of occurrence revealed in early July middle August, and late September respectively. Average number of eggs conceived in female adult was 229.3. Spray effect of chemical control showed as follows; lime sulfur with tow applications of pesticides (late June, late August) at 97.8%, machine oil with tow applications of pesticides (late June, late August) at 96.8%. And during the growing period, the spray results using three applications of pesticide only (late June, late August, amid September) showed 77.2% in field condition.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.52-62
• /
• 1994

기계나 구조물 파괴의 대부분은 노치부를 기점으로 하여 발생하기 때문에 첨단복합재료를 노지부 재로서 안전하면서도 경제적으로 사용하기 위해서는 각종 조건하에 있어서 강도특성을 명확히 하는 것은 대단히 중요하다. 본 연구에서는 노치를 갖는 복합재료를 이용하여 각종조건하에서 강도특성평가실험을 행하였으 며, 얻어진 결과를 종합하면 다음과 같다. (1) 첨단복합재료 노치재는 試驗片의 幾可學的 形狀과는 관계없이 노치반경 p만에 의해 결정되는 최대탄성응력 $\sigma_{max}$일정의 條件下에서 破t짧된다. (2) 破斷時 최소단면에서의 공칭응력 $\sigma_{c}$와 응력집중계수 $K_{t}$와의 관계에 있어서,$\sigma_{c}$의 값이 $K_{t}$의 증대와 더불어 떨어지고 있는 부분과, $K_{t}$와 관계없이 거의 일정하게 되고 있는 부분으로 나누어지는 現象은 노치재의 回轉굽힘 또는 인장압축파열에서 보여지는 현상과 外觀上 對應하고 있다. 즉, 정적파괴와 피로파괴는 파괴의 양상이 비슷하다 (3) PEN수지단체의 경우, 피로균열발생은 점발생적 피로균열이 최대탄성응력에 의해 지배되며, 노치에 만감하며,균열전파수명은전수명에 비해 상당히 짧다. (4) 단탄소섬유강화복합재료의 경우, 피로균열은 섬유端에 응력이 집중하기 때문에 일반적으로 섬유端에서 아주 빠른 시기에 발생하지만, 섬유가 피로균열진전에 대해 방해물로 작용하기때문에 아주 천천히 전파한다. (5) 短탄소鐵維는 피로균열발생에 대해서는 負의 강화작용 전수명의 극히 초기단계에 피로균열 발생을, 피로균열전파에 대해서는 正의 강화작용을 한다. (6) 단탄소섬유를 PEN에 강화함으로 인해 정적강도 보다 피로강도에 더 큰 강화효과를 초래했으며, 선형노치역학의 개녀은 첨단 복합재료의 강도평가에 대단히 유효했다.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.31-39
• /
• 2009

Requirement level regarding processing and managing real-time datastream in an ubiquitous environment is increased. Especially, due to the unbounded, high frequency and real-time characteristics of datastream, development of specialized stroge manager for DSMS is necessary to process such datastream. Existing DSMS, e.g. Coral8, can support datastream processing but it is not scalable and cannot perform well when handling large-volume real-time datastream, e.g. 100 thousand over per second. In the case of Oracle10g, which is generally used in related field, it supports storing and management processing. However, it does not support real-time datastream processing. In this paper, we propose specialized storage manager of DSMS for real-time compressed storing on semiconductor or LCD production facility of Samsung electronics, Hynix and HP. Hynix and HP. This paper describes the proposed system architecture and major components and show better performance of the proposed system compared with similar systems in the experiment section.

• Journal of the Korean Arthroscopy Society
• /
• v.15 no.2
• /
• pp.125-131
• /
• 2011

Optimal treatment of the torn posterior cruciate ligament (PCL) remains controversial. The type of tibial fixation (transtibial vs inlay), the femoral tunnel position within the femoral footprint (central, eccentric or isometric), and the number of bundles in the reconstruction (single-bundle vs double-bundle) are controversial issues. The PCL has a better chance of spontaneously healing than the anterior cruciate ligament (ACL) because of a rich blood supply (near the branch of the middle genicular artery) and coverage with a thicker synovium. In general, for easier passage of the graft and full visualization of the original ligament attachment site during the precise positioning of the tunnel, the remaining PCL fibers are usually debrided during reconstruction. However, the remaining remnant structures would significantly contribute to the posterior stability of the knee joint, the healing of the graft, preserving proprioceptive function of the mechanoreceptors in the PCL. Double bundle PCL reconstruction may result in some surgical complications because of increased complexity of making tunnel. Therefore, single bundle PCL reconstruction with remnant preservation seems to be an effective procedure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.21-32
• /
• 2002

In general, the response spectrum analysis method (R.S.A) is widely used for seismic analysis of building structure. But, it is not common to apply R.S.A for the analysis of structural vibration caused by dynamic loads of equipments, machines and moving leads, etc. The time history analysis method(T.H.A) for the vibration analysis, compared with R.S.A, is very complex, difficult and time consuming. So the application of R.S.A, that is convenient to calculate maximum responses for structural vibration, is proposed in this study. At first, the procedure for the application of the R.S.A to calculate of the maximum vibration response induced by dynamic load applied on the single point is described. And then, the process, which can save the time and the memory for calculation of the maximum vibration response induced by dynamic loads on the multi-point is proposed, and the maximum structural response caused by moving loads are obtained. Lastly, the accuracy of the proposed method is verified by comparing the results of R.S.A to T.H.A for some example models.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.1-12
• /
• 2008

The major components of an engine are the cylinder block, cylinder head, crankshaft, connecting rod, and camshaft, which are more popularly known as the 5 C's. Thus, the engine shop usually consists of six sub-lines, including five machining lines and one assembly line. The flow line is the typical concept of the layout when the engineer designs the engine shop. This paper introduces a simulation study regarding the new crankshaft machining line in a Korean automotive factory. The major factors for designing the machining line are considered, and their effects on the system performance are evaluated with a three-dimensional(3D) simulation model that is developed with $QUEST^{(R)}$. The initial layout is analyzed using the simulation model, and we suggest some ideas for improvement.

• Archives of design research
• /
• v.13 no.2
• /
• pp.45-53
• /
• 2000

All artists set the arrangement of relative probability subjectively by giving the contrast of color and chroma to give higher probability of some colors in their works and then perform the mechanical assignment. Also the analysis of plastic structure in all areas of design has been made by subjective and qualitative method based on the emotion, intuition and experience of interpreter of design structures and that of color structures was done by the same method. Therefore this study compares and suggests the style characteristics of modern and postmodern design with the object quantitative analysis of color structure by selecting and applying Ilya Chashinik's ceramic dishes as the analysis product of modern design and Jim Melchert's ceramic wall painting as that of postmodern design of 'analysis model of color structure' researched and developed for the quantitative information analysis based on information and communication theory and it is also meaningful in introducing and presenting the analytic procedure and methods centering around quantitative analysis model of color structure analysis.