• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.3
• /
• pp.366-370
• /
• 1996

Bilateral cleft lip reconstruction can be performed in one-or two-stages. The choice depends on the surgeon's proficiency and experience. However the type and severity of the cleft must be considered. Complete or incomplete symmetric, bilateral clefts in which the premaxilla is within the alveolar arch or slightly protruded can be successfully treated with simultaneous lip reconstruction on both sides. There are some advantages that one-stage lip reconstruction facilitates creation of a symmetric and balanced lip, retraction of protruding premaxilla and the parent's psychologic satisfaction. However, there are some disadvantages such as micrognathia of the upper jaw by severe scar formation and poor adaptation of flap margins by severe tension. The surgeon must be able to judge and exploit the advantages offered by one-stage approach. We present the case report of one-stage reconstruction of primary bilateral cleft lip with literature reviews.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.3
• /
• pp.211-215
• /
• 2000

Lipid extraction preceding fatty acid methyl esters preparation for gas-liquid chromatography is time-consuming and cumbersome. We performed one-step extraction/methylation method with a mixture of methanol-heptane-benzene-DMP-H$_2$SO$_4$ without prior fat extraction. The simultaneous digestion and lipid transmethylation takes place at 8$0^{\circ}C$ in a single phase. After cooling till room temperature, two phases are formed. The upper one of the phases contains the fatty acid methyl esters ready for GLC. The fatty acid composition of major industrial crops obtained by the one step extraction/methylation method (method 1 and 2) was almost identical with the fatty acid composition of the pure fats extracted with hexane by the Soxtec instrument (method 3). Due to its simplicity, speed, and reduced organic solvent the one-step extraction/methylation method (method 1 and 2) should be useful to determine overall fatty acid composition, especially in situations where many samples have to be analyzed.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.101-109
• /
• 2010

The objective of this study is to investigate the characteristics of natural indigo dyeing of cotton fabric. Reduction and dyeing were carried out by one-step process using an infrared dyeing machine at the liquor ratio of 1:100, and subsequently oxidation and washing in water were followed. Dye uptake was increased with the increase of indigo concentration. Over the full range of dyeing tests, the dyeing condition was optimized to $40^{\circ}C$ for 40min. For most of dye concentrations, the cotton fabrics showed mainly PB color. Maximum K/S value was shown at 4g/L of sodium hydrosulfite concentration and the color strength increased with the increase of dye concentration. Value(lightness) decreased with the increase of dye uptake irrespective of mercerization or reduction method, while the mercerized cotton showed two times higher dye uptake than the untreated cotton. Whereas hue of the untreated cotton showed large decrease of P character(5.6~3.5 PB) with the increase of dye uptake, that of the mercerized cotton increased P character(4.7~5.5 PB). Irrespective of mercerization, value and chroma decreased with the increased of dye uptake. In addition, the untreated showed lower chroma than the mercerized cotton. In the case of traditional reduction, hue of the untreated cotton was changed very little with the increase of dye uptake. For hydrosulfite reduction, P character decreased with the increase of dye uptake. The difference of hue value was small with the change of reduction method(hydrosulfite reduction or traditional fermentation). Color character was not influenced by the changed maximum absorption wavelength. Washing fastness showed 4~4/5 shade change rating without any staining. And dry rubbing fastness was good at low color strength. The bacterial reduction ratios of dyed cotton fabric were also increased.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.539-542
• /
• 2005

Reconstructions of soft tissue defect of the posterior ankle including Achilles the tendon should take into account not only coverage but functional outcome. Various methods of tendon transfer and tendon graft have been reported as a single-stage procedure. With advances and refinements in microsurgical techniques, several free composite flaps including tendon, fascia, or nerve have been used in single-stage reconstructions of large defects in this area minimizing further damage to the traumatized leg. However, when free flap is not feasible for some reasons, this cannot be accomplished successfully. Here we present a patient with Achilles tendon and circumferential large soft tissue defect. Because of circulatory compromise of the lower extremity, free flap reconstruction could not be applied. Instead, cross-leg composite flap of the dorsalis pedis flap including the extensor hallucis brevis musle and tendon, and tendon strips of the Second, third and fourth extensor digitorum logus were employed, Functional reconstruction of the tendon and resurfacing were obtained at the same time. The flap was detached 3 weeks postoperatively, and the transplanted flap has survived without any complications. By 3 months after surgery, full weight bearing, tip-toe standing and even walking without crutch assistance was possible. When functional reconstruction with the free flap is unattainable in the large defect of the posterior ankle including the Achilles tendon, cross-leg composite island flap of dorsalis pedis flap and tendon strips of the extensor digitorum longus tendon is a viable alternative.

• The Korean Journal of Applied Statistics
• /
• v.22 no.6
• /
• pp.1355-1364
• /
• 2009

This work propose a robust test for location parameters in multivariate data based on MVE and MCD with the affine equivariance and the high-breakdown properties. We consider the hypothesis testing satisfying high efficiency and high test power simultaneously to bring in the one-step reweighting procedure upon high-breakdown estimators, which generally suffer from the low efficiency and, as a result, usually used only in the exploratory analysis. Monte Carlo study shows that the suggested method retains nominal significance levels and higher testing power without regard to various population distributions than a Hotelling's $T^2$ test. In an example, a data set containing known outliers does not make an influence toward our proposal, while it renders a Hotelling's $T^2$ useless.

• Journal of Korean Foot and Ankle Society
• /
• v.14 no.2
• /
• pp.182-185
• /
• 2010

19 years old girl presented with bilateral 1, 4th brachymetatarsia. We have used an autograft interposition technique to lengthen the brachymetatarsia involving first and fourth metatarsal. The technique was to graft the bone fragment from the relatively long second and third metatarsal bone to be used as an autograft to the short first and fourth metatarsal bone. The method is superior in not having the necessity of a long term external fixator which is needed using callotasis method and in also avoiding the inconvenience of performing an allograft. Absence of donor site complication during autograft from iliac bone is also an advantage to be mentioned. Our technique can therefore be ascertained as a successful method in both cosmetic results and improvement of symptoms including reduction in length of recovery.

• Journal of the Korean Ceramic Society
• /
• v.39 no.6
• /
• pp.558-565
• /
• 2002

Coal fly ash, produced from a power plant in Korea was used for the production of glass-ceramics and the physical properties of glass-ceramics were evaluated. CaO and TiO$_2$ were added into the fly ash during the melting process to reduce the viscosity of molten glass and to induce internal crystallization of glass, respectively. Glass-ceramic was produced through a single stage heat treatment (at 950∼1050$\^{C}$ for 37∼240 min) after preparing glass (iota fly ash powder. As a result, a new tiny rod type crystals (a=7.4480, b=10.7381, c=4.3940 A, $\alpha$=94.9, $\beta$=98.6, γ=108.5°) was found in the glass-ceramics, which showed attractive mechanical properties, high hardness (7.1∼7.6 GPa) and wear resistance (by erosion test). Thus a glass-ceramic produced from thermal power plant fly ash and cell as a source for CaO exhibits a suitable treatment for the recycling and exploitation of waste materials and would be acceptable for a new application far building materials.

• Journal of the Korean Chemical Society
• /
• v.40 no.10
• /
• pp.649-655
• /
• 1996

The chemical behaviour of Pt(Ⅱ) and Pd(Ⅱ) complexes with the organic ligand tetramethylenesulfoxide(TMSO) has been investigated by UV/vis-spectrophotometric, magnetic, and electrochemical methods. Two energy absorption bands are observed in the spectra of these complexes. The crystal field splitting energy, spin pairing energy, and bond strength were obtained from the spectra of the complexes. The electronic properties of the complexes are found to be delocalized, and low-spin state. The correlation between ligand and metals were strong bonding strength. These complexes are diamagnetics. The redox reaction processes of the complexes were investigated by cyclic voltammetry in an aprotic solvent. The redox processes of complexes turned out to be respect to one-electrton one step. These complexes were considerably diffusion and reaction controlled.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.97-101
• /
• 2002

Co(II) complexes with tridentate Schiff base-NOIPH and tetradentate Schiff base-$NOTDH_2$ and $TNBPH_4$ were synthesized. The redox process of the complexes in DMF solution containing 0.1M TBAP was investigated at glassy carbon electrode by cyclic voltammetry and differential pulse voltammetry techniques. Reduction step of [Co(II)$(NOIP)_2$] and [Co(II)$(H_2O)_2$] complexes were observed in two step as one electron process of irreversible or quasi-reversible and diffusion-controlled reaction. [$Co(II)_2$(TNBP)] complex was observed in one step as one electron process of quasi-reversible and diffusion-controlled reaction.

• Archives of Reconstructive Microsurgery
• /
• v.16 no.2
• /
• pp.93-99
• /
• 2007

Purpose: To report the clinical results and efficacies of one stage reverse lateral supramalleolar adipofascial flap for soft tissue reconstruction of the foot and ankle joint. Material and Methods: We performed 5 cases of one stage reverse lateral supramalleolar adipofascial flap from Jan 2005 to Sept 2005. All patients were males and mean age was 50(36~59) years old. The causes of soft tissue defects were 1 diabetic foot, 2 crushing injuries of the foot, 1 open fracture of the calcaneus, and 1 chronic osteomyelitis of the medial cuneiform bone. Average size of the flap was 3.6(3~4)${\times}$4.6(4~6) cm. All flaps were harvested as adipofascial flap and were performed with the split-thickness skin grafts (STSG) above the flaps simultaneously. Results: All flap survived completely and good taking of STSG on the flap was achieved in all cases. There were no venous congestion and marginal necrosis of the flap. In diabetic foot case, wound was healed at 4 weeks after surgery due to wound infection. There was no contracture on the grafted sites. Ankle and toe motion were not restricted at last follow up. All patients did not have difficulty in wearing shoes. Conclusion: The reverse lateral supramalleolar adipofascial flap and STSG offers a valuable option for repair of exposure of the tendon and bone around the ankle and foot. Also one stage procedure with STSG can give more advantages than second stage with FTSG, such as good and fast take-up, early ambulation and physical therapy, and good functional result.