• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.561-562
• /
• 2011

인 휠 모터를 이용하여 구동되는 전기차량은 각 모터의 동기 제어가 요구된다. 기존의 마이크로컨트롤러는 구동시킬 수 있는 모터의 개수가 제한되어 인 휠 모터를 이용하여 구동되는 전기차량과 같은 다축 제어 시스템에 적용하기가 어렵다. 따라서 본 논문에서는 FPGA(Field Programmable Gate Array)를 이용하여 4축 동기 SVPWM 기법을 구현하였으며, 시뮬레이션을 통하여 성능을 확인하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.4
• /
• pp.35-43
• /
• 2023

In next-generation electric vehicles, research is being conducted on an in-wheel motor system that directly controls torque by each wheel to improve total cost and driving performance. Accordingly, in this paper, a study was conducted on an algorithm that distributes the torque applied to each wheel in a torque vectoring system applied to an in-wheel motor for driving an electric vehicle. In order to implement a vehicle model that applies actual vehicle characteristic parameters according to vehicle driving and steering, a simulation was conducted in the MATLAB Simulink environment, and it was confirmed that torque distribution was performed according to the proposed algorithm.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.58-60
• /
• 2020

본 논문에서는 2개의 인-휠 브러쉬리스 모터로 구동하는 차량의 실시간 위치 추종 제어방법을 제안한다. 2개의 모터를 사용하여 구동되는 차량의 경우 방향 및 이동이 각 모터의 제어를 기반으로 결정된다. 하지만 컨트롤러에 의해 지령된 위치까지 모터의 제어가 정확하게 된다 하더라도 차량의 실제 위치는 바퀴와 바닥면사이의 슬립이나 외부 요인에 의해 오차가 발생하게 된다. 따라서 이렇게 발생하는 오차를 보상하기 위해 차량의 실시간 각도 추정이 가능한 IMU(Inertia Measrement Unit) 센서를 기반으로 진행 각도를 보정하며 주행 중 발생하는 위치오차를 보상하기 위해 모터의 홀센서로부터 계산되는 위치와 IMU 센서의 데이터를 조합하여 실시간 위치 추종 제어방법을 제안한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.4
• /
• pp.405-411
• /
• 2015

This paper sugg ests speed measurement and control system desig n methods to drive the Wheel-in Motor that is transfer rotational force to the hub of the wheel and drives it directly. The dsPIC30F2010 16 bit microprocessor specified to motion controller is used as a intelligent controller. The minimum functions of dsPIC30F2010, system clock, PWM output, I/O, timer, communication, applicable to motor control are used and operating characteristics of hall signal measurement and control software functions are tested. Also the algorithm including PDFF speed control program was implemented using this software functions and show the experimental results..

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.380-383
• /
• 2014

Hub BLDC (Brushless Direct Current) motor is a multi-pole outer rotor-type high-efficiency electric motors and the Direct Drive Motor having permanent magnet rotor to drive shaft of the wheel, also called wheel-in motor. In this study, we design a speed controller with vector control technique using the dsPIC30f2010 16 bit micro-controller to drive Hub BLDC motor. Especially, we propose vector control method which reduce complex operation time, and design directly MOSFET inverter directly which gain high economics.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.11
• /
• pp.919-924
• /
• 2016

This paper proposes a robust control design method for improving the cornering stability of a personal electric vehicle equipped with in-wheel motors. In general, vehicles undergo severe parameter variations and unpredictable disturbances with respect to a wide range of driving conditions (e.g., road surface conditions and vehicle velocity conditions). For this reason, robust control design techniques are required to guarantee consistent driving performances and robustness against various driving conditions. In this paper, an adaptive sliding mode control method is employed to enhance cornering stability by controlling the direct-drive in-wheel motors independently. Additionally, in order to confirm the effectiveness of a proposed control method, real driving tests with an experimental personal electric vehicle are performed.

• The Journal of Korea Robotics Society
• /
• v.18 no.3
• /
• pp.299-307
• /
• 2023

In the midst of accelerating wars around the world, unmanned robot technology that can guarantee the safety of human life is emerging. ERP-42 is a modular platform that can be used according to the application. In the field of defense, it can be used for transporting supplies, reconnaissance and surveillance, and medical evacuation in conflict areas. Due to the nature of the military environment, atypical environments are predominant, and in such environments, the platform's path followability is an important part of mission performance. This paper focuses on reducing the minimum turning radius in terms of improving path followability. The minimum turning radius of the existing 2WS/2WD in-wheel platform was reduced by increasing the torque of the independent driving in-wheel motor on the rear wheel to generate oversteer. To determine the degree of oversteer, two GPS were attached to the center of the front and rear wheelbases and measured. A closed-loop speed control method was used to maintain a constant rotational speed of each wheel despite changes in load or torque.