• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1107-1114
• /
• 2004

System Packet Interface Level 4 Phase 2(SPI-4.2) is an interface for packet and cell transfer between a physical layer(PHY) device and a link layer device, for aggregate bandwidths of OC-192 ATM and Packet Over Sonet/SDH(POS), as well as 10Gbps Ethernet applications. SPI-4.2 core consists of Tx and Rx modules and supports full duplex communication. Tx module of SPI-4.2 core writes 64-bit data word and 14-bit header information from the user interface into asynchronous FIFO and transmits DDR(Double Data Rate) data over PL4 interface. Rx module of SPI-4.2 core operates in vice versa. Tx and Rx modules of SPI-4.2 core are designed to support maximum 256-channel and control the bandwidth allocation by configuring the calendar memory. Automatic DIP4 and DIP-2 parity generation and checking are implemented within the designed core. The designed core uses Xilinx ISE 5.li tool and is described in VHDL Language and is simulated by Model_SIM 5.6a. The designed core operates at 720Mbps data rate per line, which provides an aggregate bandwidth of 11.52Gbps. SPI-4.2 interface core is suited for line cards in gigabit/terabit routers, and optical cross-connect switches, and SONET/SDH-based transmission systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.131-134
• /
• 2018

Structural equation modeling is pointing to statistical procedures that simultaneously perform path analysis and confirmatory factor analysis. Today, this statistical procedure is an essential tool for researchers in the social sciences. There are as (AMOS, LISREL and PLS) representative tools that can perform structural equation modeling analysis. AMOS provides a convenient graphical user interface for beginners to use. PLS has the advantage of not having a constraint on normal distribution as well as a graphical user interface. Therefore, we compared and analyzed the three most commonly used tools in social sciences. This study suggests practical and theoretical implications based on the results.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.05a
• /
• pp.82-87
• /
• 2001

In this paper we described the generation method of interface logic which can be replace between IP and IP handshaking signal with asynchronous logic circuit. Especially, we suggest the new \"Waveform Conversion Algorithm : Wave2VHDL\", if only mixed asynchronous timing waveform suggested which level type input and pulse type input for handshaking, we can convert waveform to flowchart and then replaced with VHDL code according to converted flowchart. Also, we assure that asynchronous electronic circuits for IP interface are generated by applying extracted VHDL source code from suggested algorithm to conventional domestic/abroad CAD Tool, and then we proved that coincidence simulation result and suggested timing diagram.g diagram.

• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.497-500
• /
• 2018

데이터 센터를 기반으로 서비스를 수행하는 기업들은 비용절감을 위해 서버 가상화 기술을 이용한다. 서버 가상화를 이용하는 기업들은 대부분 하이퍼바이저 기반의 서버 가상화 기술을 사용하며, 이 경우 하드웨어 가상화를 통해 커널 단에서 많은 I/O와 리소스를 처리해야 한다. 따라서 하이퍼바이저 기반의 서비스는 느리다는 단점이 있으며 이를 해결하기 위해 컨테이너 기반의 가상화 기술을 이용할 수 있다. 하지만 컨테이너 기반의 네트워크 또한 문제점이 존재한다. 컨테이너 기반의 네트워크는 유연한 네트워크를 구성하기 어렵고, 기존의 컨테이너 네트워크 인터페이스를 활용할 경우 데이터 전송 성능이 저하된다. 본 논문에서는 컨테이너 오케스트레이션 툴인 Kubernetes와 SDN (Software-Defined Network) 기반의 가상전용 네트워크 연계 환경을 구축하고 이에 적합한 컨테이너 네트워크를 연구하여 이의 문제점을 해결한다. 즉, 가상전용 네트워크와 Kubernetes의 연계를 통해 고성능의 유연한 네트워크를 구성할 수 있는 프레임워크를 개발하여 기존 컨테이너 기반 네트워크와 비교하고 성능을 검증했다.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.101-112
• /
• 2010

The recent trend of the hacking deals with all the IT infrastructure related to the profit of the companies. Presently, they attack the service itself, the source of the profit, while they tried to access to the service infrastructure through the non-service port in the past. Although they affect the service directly, it is difficult to block them with the old security solution or the old system and they threaten more and more companies with the demand of money menacing the protection of customers and the sustainable management. This paper aims to design and implement multi-platform network packet scanner targeting the exception handling network intrusion detection system which determines normal, abnormal by traffic. Linux and unix have the various network intrusion detection and packet management tools like ngrep, snort, TCPdump, but most of them are based on CUI (Character based User Interface) giving users discomfort who are not used to it. The proposed system is implemented based on GUI(Graphical User Interface) to support the intuitive and easy-to-use interface to users, and using Qt(c++) language that supports multi-platform to run on any operating system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.679-684
• /
• 2017

Friction Stir Welding is a metal welding technique, in which friction heat between a welding tool and a welding material is used to weld parts at temperatures below the melting point of a material. In this study, the temperature and velocity changes in a magnesium alloy (AZ31) during the welding process were analyzed by computational flow dynamics technique while welding the material using a friction stir welding technique. For the analysis, the modeling and analysis were carried out using Fluent as a fluid analysis tool. First, the welding material was assumed to be a temperature-dependent Newtonian fluid with high viscosity, and the rotation region and the stationary region were simulated separately to consider the rotational flow generated by the rotation of the welding tool having a helical groove. The interface between the welding tool and welding material was given the friction and slip boundary conditions and the heat transfer effect to the welding tool was considered. Overall, the velocity and temperature characteristics of the welded material according to time can be understood from the results of transient analysis through the above flow analysis modeling.

• Journal of KIISE:Software and Applications
• /
• v.30 no.11
• /
• pp.1080-1091
• /
• 2003

Recently, the distance education has been rapidly proliferated with the rapid growth of the Internet and high speed networks. There has been relatively much research with regard to online lecture (teaching and studying) tools for the distance education, compared to the virtual laboratory tools (for self-study and experiments). In this paper, we design and implement a web-based simulation tool, named as SimDraw, for the virtual laboratory in the distance education. To apply the web-based simulation technology into the distance education, some requirements should be met; firstly, the user interface of the simulation should be very easy for students. Secondly, the simulation should be very portable to be run on various computer systems of remote students. Finally, the simulation program on remote computers should be very thin so that students can easily install the program onto their computers. To meet these requirements, SimDraw adopts the client/server architecture; the client program contains only model development and animation functions so that no installation of a client program onto student's system is required, and it can be implemented by a Java applet in Web browsers. The server program supports client programs by offering the functions such as remote compiling, model storing, library management, and user management. For the evaluation of SimDraw, we show the simulation process using the example experimentation of the RIP(Routing Information Protocol) Internet routing protocol.

• Convergence Security Journal
• /
• v.4 no.3
• /
• pp.27-35
• /
• 2004

A current trend in telecommunication is the convergence of wireless communication and computer network technologies, and the emergence of wireless application protocol(WAP) devices is an example. Computer system managers are often requested to solve urgent system problems. Many times, they cannot access a computer to perform remote system management tasks. Aiming at solving this problem, this paper presents a novel tool for system management that uses a WAP interface, and focuses on the description of the architecture and the associated application modules.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.162-164
• /
• 2019

본 논문에서는 물체인식 딥러닝 모델 생성에 필요한 라벨링(Labeling)과정에서 사용자가 다양한 기능을 활용하여 효과적인 학습 데이터를 구성할 수 있는 GUI 프로그램을 구현했다. 프로그램의 인터페이스는 파이썬 기반의 GUI 모듈인 Tkinter 를 활용하여, 실시간으로 이미지 데이터를 수집할 수 있는 크롤링(Crawling)기능과 미리 학습된 Retinanet 을 통해 이미지 데이터를 인식함으로써 자동으로 주석(Annotation) 과정을 수행할 수 있는 기능을 구성했다. 또한, 수집한 이미지 데이터를 다양한 효과와 노이즈, 변형 등으로 Augmentation 기능을 추가함으로써, 사용자가 모델을 학습하기 위한 데이터 전처리 단계를 하나의 GUI 프로그램에서 수행할 수 있도록 했다. 또한 사용자가 직접 학습한 모델을 추정 모델(Inference Model)로 변환하여 프로그램에 입력할 수 있도록 설계한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.265-270
• /
• 2010

소셜 미디어(Social Media)란 사람들이 의견, 생각, 경험, 관점 등을 서로 공유하기 위해 사용하는 온라인 툴과 플랫폼을 뜻한다. 여행에서 가장 중요한 정보는 위치와 경로 정보이다. 하지만 우리가 다른 사람들의 여행정보를 검색하여 보면 위치와 경로 정보를 보여주는 방법으로는 지도를 캡처하여 그 위에 직접 경로를 그린 뒤 그림파일로 저장하여 올려서 사진처럼 보여주는 경우가 대부분이며 지도를 제공하는 여행 블로그 사이트에서는 출발 정보와 목적지 정보를 입력하면 지도 위에 목적지와 그 사이를 선으로 연결하여 같이 보여주는 정도의 서비스를 제공한다. 또한 지도 위의 정보와 실질적인 여행 정보, 즉 사진이나 여행자의 메모나 생각 같은 글이 연결되어 보여주지 못한다. 이에 본 연구에서는 사용자가 자신의 여행기를 정리하고 표현하는데 있어서 지도 위에서 자유롭게 사용자의 의도대로 표현할 수 있는 인터페이스를 생성하는 것을 목표로 한다.