• Title/Summary/Keyword: 인터디지털 필터

Search Result 23, Processing Time 0.027 seconds

Simulation of Surface Acoustic Wave Filters Using SPICE (SPICE를 사용한 표면음파 필터의 시뮬레이션)

  • Yu, Sang-Dae
    • Journal of Sensor Science and Technology
    • /
    • v.10 no.2
    • /
    • pp.142-147
    • /
    • 2001
  • Using transmission-line equivalent circuit based on cross-field model for an interdigital acoustic wave transducer, an efficient simulation technique of SAW filters by SPICE is proposed. Propagation of surface acoustic wave is modeled as transmission line so that frequency-dependent circuit elements are not needed in the equivalent circuit of an interdigital transducer. Because the equivalent circuits for frequency-dependent circuit elements are not derived approximately, and a small number of circuit elements are used in the equivalent circuit for filters, simulation time is much reduced. The utility of the proposed technique is demonstrated through simulation for the characteristics of SAW filters such as insertion loss, input admittance, passband ripple, and harmonic frequency response.

  • PDF

The Analysis of Interdigital Bandpass Filter for K-band (K대역용 인터디지털 대역통과 필터분석)

  • 심재우;이영철;김영진
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2000.10a
    • /
    • pp.186-189
    • /
    • 2000
  • In this paper, we have designed a bandpass filter to apply the downconverter of the K-band Mu-hung-hwa satellite. To pass only the 25-30% of the bandwidth at the center frequency of 19.6GHz, we have designed a six-order interdigital bandpass filter using microstrip lines. Simulation result of optimization show that insertion loss is -0.275dB and reflection coefficient is -20.95dB at the passband frequency. measurement is determined center frequency, 19.150Hz, insertion loss, -4.1dB, input reflection coefficient. -l5dB and output reflection coefficient -l6dB.

  • PDF

A Study on the Design of Image Rejection Interdigital-Filter(IRIF) for 5.8GHz Wireless LAN (5.8GHz 무선 LAN용 영상제거 인터디지털 필터 설계에 관한 연구)

  • 유재문;강정진;안정식
    • Journal of the Korean Institute of Telematics and Electronics T
    • /
    • v.35T no.3
    • /
    • pp.31-36
    • /
    • 1998
  • In this paper, Image Rejection Interdigital Filter(IRIF) for 5.8GHz wireless LAN was designed and implemented. When the input signal is -30dBm in the 4~8㎓ frequency band, the insertion loss including all kinds of loss is 6.3dB in the center frequency 5.775GHz. Therefore, it was showed practically insertion loss of about -3.3dB. Especially, image signal rejection is about -l7dB in the image frequency 6.475GHz. and skirt characteristics of the high frequency band is very excellent. Therefore, it was confirmed that the proposed IRIF is suitable for RF image signal rejection in the 5.8GHz wireless LAN system.

  • PDF

Comparison of Band Pass Filter Performance Using Liquid Crystal Polymer Substrate in Millimeter-Wave Band (밀리미터파 대역에서 액정 폴리머(Liquid Crystal Polymer) 기판을 이용한 대역통과필터 비교)

  • Oh, Yeonjeong;Lee, Jaeyoung;Choi, Sehwan
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.28 no.2
    • /
    • pp.39-44
    • /
    • 2021
  • In this paper, two types of BPF(Band Pass Filter) which are hair-pin and interdigital have been designed for millimeter-wave application using two types of material which are LCP(Liquid Crystal Polymer) and PTFE(Polytetrafluoroethylene) and also, their performances such as bandwidth, insertion loss, and in-band flatness are compared. The proposed BPF are designed as third-order filters, and their pass band is from 26.5 GHz to 27.3 GHz. Interdigital BPF using PTFE substrate has most wide -3 dB S21 bandwidth of 7.8 GHz and hair-pin BPF using LCP substrate has most narrow -3 dB S21 bandwidth among the proposed four BPF. For in-band insertion loss, hair-pin BPF using PTFE substrate achieves low insertion loss better than -0.667 dB, and hair-pin BPF using LCP substrate exhibits relatively high insertion loss among the proposed four BPF better than -0.937 dB. However, the maximum difference in insertion loss performance among the proposed four BPF is 0.27 dB, which is too small to negligible. For in-band flatness, interdigital BPF using PTFE substrate shows greatest performance of 0.017 dB, and hair-pin BPF using LCP substrate exhibits the lowest performance of 0.07 dB. There are tiny difference in in-band flatness performance of 0.053 dB. As a results, it is considered that the BPF using LCP substrate can derive the performances similar to that of the BPF using PTFE substrate in Millimeter-wave band.

Ultra Wideband Bandpsss Filter Design using the CRLH Transmission Line (CRLH 전송선로를 이용한 초광대역 대역통과 필터의 설계 및 구현)

  • Kim, Gi-Rae
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.10
    • /
    • pp.2233-2238
    • /
    • 2013
  • A novel design method of ultra wideband based on the composite right-/left handed (CRLH) transmission line is presented in this paper. Defected ground structure and microstrip interdigital coupler are used to implement the CRLH transmission line. The proposed CRLH transmission line in this paper have composite characteristics of low pass filter and high pass filter, also it has good advantages of low insertion loss and ultra wide passband characteristics. The structure with different cell number are studied, and the UWB filter using 3-cell CRLH transmission line is fabricated and measured, which shows a good agreement between simulated and measured results. It has center frequency of 5 GHz, fractional bandwidth of 105 %, and insertion loss of 0.7 dB at center frequency.

Design of UWB Bandpass Filter using CRLH Transmission Line (복합 좌우향 전송선로를 이용한 UWB 대역통과 필터의 설계)

  • Kim, Girae
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.50 no.11
    • /
    • pp.36-40
    • /
    • 2013
  • A novel design method of ultra wideband bandpass filter using CRLH transmission line with Dumbell type DGS is presented in this paper. Defected Ground Structure and microstrip interdigital capacitor are used to design the ultra wideband (UWB) filter. CRLH transmission line has composite characteristics of low pass and high pass filter. As control of cutoff frequency of low pass and high pass response on CRLH transmission line, we can get characteristic of UWB filter. We designed and simulated for CRLH transmission lines with one, two, four, and eight cells. A UWB filter using four cells CRLH is designed and fabricated to verify the results. The characteristics of designed filter have center frequency of 5GHz and relative bandwidth of 88%.

Digital Down Converter System improving the computational complexity (복잡도를 개선한 Digital Down Converter 시스템)

  • Moon, Ki-Tak;Hong, Moo-Hyun;Lee, Joung-Seok;Kim, Kyung-Seok
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.10 no.3
    • /
    • pp.11-17
    • /
    • 2010
  • Multi-standard, multi-band, multi-service system to ensure a flexible interface between the SDR (Software Defined Radio) technology for the implementation of the Stability and Low-Power, Low-Calcualrion DDC (Digital Down Conversion) technology is essential. DDC technology consists of a digital channel filter. This is a typical digital filter because of the limited fisheries are vulnerable to overflow and rounding errors are drawbacks. In this paper, we overcome this disadvantage, we propose the structure of the DDC. The way WDF (Wave Digital Filter) Structural rounding error due to the structural resistance to noise. Therefore, This is the useful structure when the filter coefficients's word length is short. In addition, since IIR filters based on FIR filters based on the amount of computation is reduced because fewer than filter's tap. The proposed structure is used in DDC that CIC (Cascaded Integrator Comb) filter, WDF, IFOP (Interpolated Fourth-Order Polynomials) were analyzed with respect to, the results were confirmed by computer simulation.

A Digital Library Prototype for Access to Diverse Collections (다양한 장서 접근을 위한 디지털 도서관의 프로토타입 구축)

  • Choi Won-Tae
    • Journal of the Korean Society for Library and Information Science
    • /
    • v.32 no.2
    • /
    • pp.295-307
    • /
    • 1998
  • This article is an overview of the digital library project, indicating what roles Koreas diverse digital collections may play. Our digital library prototype has simple architecture, consisting of digital repositories, filters, indexing and searching, and clients. Digital repositories include various types of materials and databases. The role of filters is to recognize a format of a document collection and mark the structural components of each of its documents. We are using a database management system (ORACLE and ConText) supporting user-defined functions and access methods that allows us to easily incorporate new object analysis, structuring, and indexing technology into a repository. Clients can be considered browsers or viewers designed for different document data types, such as image, audio, video, SGML, PDF, and KORMARC. The combination of navigational tools supports a variety of approaches to identifying collections and browsing or searching for individual items. The search interface was implemented using HTML forms and the World Wide Web's CGI mechanism.

  • PDF

An Affective 3D Facial Makeup Simulation Using a Multi-sensory Interaction (다중 감각 인터랙션을 이용한 감성적 3차원 얼굴 메이크업 시뮬레이션)

  • Kim, Jeong-Sik;Kim, Hyeon-Joong;Choi, Soo-Mi
    • 한국HCI학회:학술대회논문집
    • /
    • 2007.02a
    • /
    • pp.500-506
    • /
    • 2007
  • 얼굴에 대한 시각적 인지는 오랫동안 인간에게 중요한 문제로 인식되어 왔다. 수 세기 동안 이루어져 왔던 미용 화장과 성형, 치아 교정 등의 다양한 연구는 사람의 얼굴을 감성적 측면에서 어떻게 하면 아름답게 만들 수 있는 가에 초점을 두었다. 본 논문에서는 휴먼 입출력 인터페이스로서 햅틱 장치와 스테레오 디스플레이를 혼합한 다중 감각 인터랙션 기반의 감성적인 3차원 얼굴 메이크업 시뮬레이션 프레임워크를 개발한다. 본 연구는 3차원 스캐너 장비로부터 사용자의 얼굴 모델을 추출하고, 그 데이터를 이용하여 자연스럽고 직관적인 얼굴 메이크업 시뮬레이션을 수행하는 것을 목표로 하고 있다. 이를 위하여 본 연구에서는 surface elements 표현 기반의 3차원 얼굴 필터링 방법과 얼굴 메이크업을 지원하는 페인팅 방법을 개발한다. 우선 사용자의 얼굴 모델을 3차원 스캐너로 획득한 후, 전처리 얼굴 필터링을 수행하여 조명, 그리고 사용자 얼굴 피부 상태에 기인하는 에러 및 속성들을 보정하고 피부 톤을 사용자가 선호하는 색으로 변경한다. 최종적으로 사용자는 햅틱 및 스테레오 디스플레이 장치를 이용하여 두 개의 레이어로 구성된 페인팅 표면 모델에 메이크업을 수행한다. 본 연구에서 적용한 surface elements 표현 기반의 그래픽 렌더링은 일반적인 메쉬 기반 페인팅의 문제점인 텍스쳐 왜곡 현상을 완화하고, 3차원 스캐너 장치에 기인하는 표면 에러를 보정한다. 그리고 전처리 얼굴 필터링과 메이크업 페인팅 방법은 사용자 중심의 감성적인 3차원 얼굴을 재구성하도록 한다. 결과적으로 본 연구에서 개발한 이러한 기술들이 다중 감각 인터페이스 기반의 메이크업 시뮬레이터의 기본 프레임워크가 되어, 차후 메이크업이나 코디네이션 분야 등의 디지털 콘텐츠 산업에서 활용될 수 있음을 확인하였다.

  • PDF

Digital Watermarking using the Channel Coding Technique (채널 코딩 기법을 이용한 디지털 워터마킹)

  • Bae, Chang-Seok;Choi, Jae-Hoon;Seo, Dong-Wan;Choe, Yoon-Sik
    • The Transactions of the Korea Information Processing Society
    • /
    • v.7 no.10
    • /
    • pp.3290-3299
    • /
    • 2000
  • Digital watermarking has similar concepts with channel coding thechnique for transferring data with minimizing error in noise environment, since it should be robust to various kinds of data manipulation for protecting copyrights of multimedia data. This paper proposes a digital watermarking technique which is robust to various kinds of data manipulation. Intellectual property rights information is encoded using a convolutional code, and block-interleaving technique is applied to prevent successive loss of encoded data. Encoded intelloctual property rithts informationis embedded using spread spectrum technique which is robust to cata manipulation. In order to reconstruct intellectual property rights information, watermark signalis detected by covariance between watermarked image and pseudo rando noise sequence which is used to einbed watermark. Embedded intellectual property rights information is obtaned by de-interleaving and cecoding previously detected wtermark signal. Experimental results show that block interleaving watermarking technique can detect embedded intellectial property right informationmore correctly against to attacks like Gaussian noise additon, filtering, and JPEG compression than general spread spectrum technique in the same PSNR.

  • PDF