• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.791-794
• /
• 2008

최근 홈오토메이션 시스템(Home Automation System) 즉, 가정 자동화 시스템에 대한 관심과 수요가 커지면서 이를 위한 네트워크 구축에 관한 여러 연구 및 개발이 활발히 이루어지고 있다. 홈오토메이션 시스템이란 가정에서 사용되는 여러 가전기기 및 센서장비를 이용하여 집 안의 기기를 제어함으로써 가정을 안전하게 관리하고, 사용자의 편의를 극대화하여 인간의 생활수준을 향상시키는 기술을 말한다. 본 논문에서는 Cypress사의 PSoC 기반으로 가정 내에서 사용할 수 있는 온도, 습도, 가스검출, 불꽃감지와 같은 여러 환경 센서 및 인체감지센서를 이용한 방범 센서 장치 구현방법을 제안하고, PSoC 기반의 WirelessUSB를 이용하여 센서 및 호스트 PC와의 네트워크 시스템을 구축한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.495-501
• /
• 2013

This paper describes a flexible wireless telemetering system using a mesoscale cantilever sensor, which is microfabricated with a patterned thin Ni-Cu foil on a resin substrate. The dynamic validation of the sensor has been conducted in a flow. The wireless telemetry is used to obtain data regarding the oscillating flows. It is shown that the sensor is nearly independent of the environmental temperature and is suitable for application to primary healthcare and diagnostic devices. It can be easily integrated with other modules for measuring physiological parameters, e.g., blood pressure, oxygen saturation, and heart rate, to increase the convenience and reliability of diagnosis. The precision and reliability of the sensor are also dependent on the design of the analog front-end and noise reduction techniques. It is shown that the present system's minimum interval between packet transmissions is ~16 ms.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.131-136
• /
• 2016

In this paper, we propose an Raspberry Pi2-based smart home security monitoring system. Proposed home security monitoring system was configured using a relatively tractable main processor raspberry pi2, ultrasonic sensors, and PIR sensors. In addition, The picamera is compatible with raspberry pi2 was connected to the servo motor. And by driving the attacker's location the video was recording. The Web server stores data of the recorded image and the sensor, and provides a web page to enable the monitoring at all remote locations. When examining efficiency of proposed home security monitoring system it was found that proposed system is easier to be made than existing home security system and is able to minimize the blind spot of the camera by using servo motor and is efficient and convenient and stable as it enables a user to handle an error in person and it uses reliable data.

• Journal of Digital Convergence
• /
• v.11 no.3
• /
• pp.311-316
• /
• 2013

In order to maximize an efficient management of human cell resource under the cryogenic environments, in this paper, a middleware is introduced to support the function for multiple-perceiving RFID tags of intelligent sample case which can share medical information between sensor network devices. Optimized user interface is also designed for that. On based of the designing, special tasks required of a genetic resource working process can be processed on Complex Machine.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.242-244
• /
• 2022

In recent years, the number of single-person households is increasing with the aging of the population and the number of the elderly living alone is increasing rapidly with the aging of the population. Therefore, the lonely death of the elderly living alone has become a social issue. In many cases, the body is discovered several days after death. In particular, lonely death of the elderly living alone is being taken more seriously in society, as there is no one to arrange funerals, organize and dispose of their belongings. Since the body is usually found after a few days, the decomposition of the body is often severe. Therefore, this paper proposes an indoor monitoring system using a temperature and humidity sensor and a human body sensor to prevent and respond to lonely deaths in the elderly living alone.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.873-882
• /
• 2022

In this paper, we studied the voice recognition system kiosk for convenience, thinking that the kiosk widely used in modern society should compensate for the inconvenience of using by the visually impaired. Using ultrasonic sensor and PIR(Passive Infrared), it recognizes the visually impaired within the range of 80cm-40cm, introduces the kiosk through the MP3 module and induces them to come closer. Also, when the visually impaired within 40cm is recognized, the product description and order are guided through the MP3 module. A recording-based data voice recognition system and a kiosk that outputs desired items through servo motors were studied. A kiosk for the convenience of the visually impaired was manufactured through operation and optimization experiments of PIR, ultrasonic, voice recognition, and shock sensor for the manufactured voice recognition kiosk. Finally, it was confirmed that security can be strengthened by using shock sensors and emergency bells to enhance security.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.376.2-376.2
• /
• 2014

마이크로볼로미터 적외선 센서는 인체감지, 전자부품의 품질검사, 에너지 절감, 산업시설감시 및 군사용으로 다양하게 적용되고 있다. 기존에 이러한 적외선 센서의 감지재료로 VOx 또는 비정질 Si이 가장 많이 사용되고 있으며, VOx는 감도가 높고, 세계적으로 가장 많이 사용되고 있는 물질이다. 본 연구에서는 기존의 VOx 박막 증착법을 개선하여 Zn 산화물 박막을 혼용한 적외선 감지재료를 이용한 마이크로볼로미터 제작 및 특성에 대해 보고한다. RF sputtering 방법으로 약 140 nm의 VOx/ZnO/VOx 샌드위치 박막을 증착하고, 산소분위기에서 열처리함으로써 온도저항계수(TCR)가 약 -3.0 %/K의 값을 갖는 특성을 구현하였다. 갓 증착된 V-Zn 박막에서는 XRD 스펙트럼에서는 V2O5 관련 피크가 주로 관측되었으며, 산소열처리에 의해 VO2 피크가 새롭게 관측되었다. 볼로미터 감지소자는 유효면적 $50{\times}50{\mu}m^2$ 으로 bulk micromaching 공정을 통해 제작하였다. Si 기판위에 SiNx 박막을 PECVD 장치를 이용하여 증착하였으며, 적외선 감지층으로 V-Zn 산화물을 RF sputtering 방법으로 증착하여 열처리 후 SiNx passivation 박막으로 보호하였다. 열적고립을 위해 패터닝 후 Si 기판을 KOH 용액을 이용하여 약 $20{\mu}m$ 식각하여 소자를 구현하였다. 제작된 소자의 특성을 평가한 결과 반응도는 1.57e+4 V/W, 탐지도는 $8.79e+7cmHz^{1/2}/W$를 얻을 수 있었다. 소자의 동작 특성을 평가하기 위해 진공 압력을 1e-3 torr 이하에서 thermoelectric cooler를 장착한 metal package를 제작하여 동작온도에 따른 특성을 평가하였다. 동작온도를 $10^{\circ}C{\sim}40^{\circ}C$로 하여 측정한 결과 동작온도가 증가할수록 신호전압은 감소함을 알 수 있었다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.501-502
• /
• 2021

기존의 홈 시스템은 비용이 비싸며 공간적인 문제가 발생하고, 기능적으로 한계가 있다. '아두이노를 활용한 스마트홈 시스템'은 아두이노를 활용하기 때문에 비용적, 공간적 문제를 해결하고 여러 가지 가전제품을 환경에 맞춰 자동으로 작동하는 스마트 기능을 넣었다. 온, 습도 센서를 이용해 내부 온도가 설정 값보다 높으면 에어컨이 켜지고, 습도가 낮으면 자동으로 가습기가 작동한다. 또한, 창문에 부착된 UV센서를 통해 자외선 수치가 높아질 경우 자동으로 블라인드가 내려간다. 침실에 누워 잠들기 전, 불을 꺼야 하는 상황이 있다. 이런 경우, 직접 불을 끄러 가지 않고 침대 머리맡에 설치된 초음파 센서에 손을 가져다 대어 일정 거리 값 이하로 되면 자동으로 침실 불이 꺼진다. 그리고 거실에 설치 된 인체감지센서를 통해 불이 꺼진 어두운 거실에 움직임이 감지되면 자동으로 거실 불이 켜지게 된다. 이러한 자동 제어 기능을 블루투스와 연동된 스마트폰을 통하여 사용자 편의에 따라 수동적 제어가 가능하고, 거실에 설치된 ESP-32CAM을 통해 밖에서도 거실 내부를 실시간 확인할 수 있다. 이런 아두이노 스마트홈 시스템으로 사용자들에게 편리함과 안정성을 제공한다.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.103-110
• /
• 1998

Pyroelectric infrared detectors based on La-modified $PbTiO_{3}$ (PLT) thin films have been fabricated by RF magnetron sputtering and rnicrornachining technology. The detectors form $Pb_{l-x}La_{x}Ti_{1-x/4}O_{3}$ (x=0.05) thin film ferroelectric capacitors epitaxially grown by RF magnetron sputtering on Pt/MgO (100) substrate. The sputtered PLT thin film exhibits highly c-axis oriented crystal structure that no poling treatment for sensing applications is required. This is an essential factor to increase the yield for realization of an infrared image sensor. Micromachining technology is used to lower the thermal mass of the detector by giving maximum sensor efficiency. Polymide is coated on top of the sensing elements to support the fragile structure and the backside of the MgO substrate is selectively etched to reduce the heat loss. The sensing element exhibited a very high detectivity D* of $8.5{\times}10^{8}cm{\cdot}\sqrt{Hz}/W$ at room temperature and it is about 100 times higher than the case of micromachining technology is not used. A sensing system that detects the position as well as the existence of a human body is realized using the array sensor.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.2
• /
• pp.76-83
• /
• 2022

With the recent development of IT technology, research and interest in various biosignal measuring devices is increasing. As an aging society is in full swing, research on the elderly population using IT-related technologies is continuously developing. This study is about the development of life pattern detection and fall detection algorithm, which is one of the medical service areas for the elderly, who are rapidly developing as they enter a super-aged society. This study consisted of a system using a 3-axis accelerometer and an electrocardiogram sensor, collected data, and then analyzed the data. It was confirmed that behavioral patterns could be classified from the actual research results. In order to evaluate the usefulness of the human activity monitoring system implemented in this study, experiments were performed under various conditions, such as changes in posture and walking speed, and signal magnitude range and signal vector magnitude parameters reflecting the acceleration of gravity of the human body and the degree of human activity. was extracted. And the possibility of discrimination according to the condition of the subject was examined by these parameter values.