• Journal of Aerospace System Engineering
• /
• v.7 no.3
• /
• pp.45-50
• /
• 2013

This is a research report about the method of how to maintain qualification of certification flight test crews. KCA(Korea Certification Agency) have completed the KC-100 airplane certification flight tests which is the first time experienced flight tests operation. After the certification flight test, it has been found that annual flying time requirement of 100 hours to the certification flight test pilot is too strict, and other several requirements to maintain the qualification of the certification test crew such as aircraft certification introduction training, initial flight test pilot and flight test engineer certification training, crew resource management training, aviation physiology training, and survival training was difficult to implement in Korean civil aviation environments. In this study, it was suggested that 30 hours of flying time for maintaining certification flight test pilot qualification could be applied to contribute for safe operation of certification flight test and the other training requirements of the certification flight test crew could be fulfilled using self made training courses, existing FAA training courses and Korean Air Force training resources. Therefore, it is recommended that the regulation of maintaining the certification flight test crew qualification should be refined to implement the requirement practically.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.1
• /
• pp.35-39
• /
• 2017

The engine is the most significant and essential part of the aircraft. As a result, systematical handling in the aircraft development stage is required from engine design to implementation to the full-scale airframe. This survey demonstrates the procedures demanded by the KAS 23 Civil Aircraft to acquire the engine Type Certification and the flight test procedures for ensuring the operational stability. Surveys were conducted on domestic and international aircraft engine certifications, technical regulations and documentations related to the Means of Compliance for flight test development stage. In addition, organized reference items that should be considered for the certification of engine flight test procedures were reviewed based on the KC-100.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.269-270
• /
• 2011

본 논문에서는 점차 증대되는 신재생 에너지 비율에 따라 계통 연계형 태양광 발전 시스템에 엄격하게 요구되고 있는 규정들에 대해 독일 연방 에너지 수자원 관리 협회(BDEW: Bundesverbands der Energie und Wasserwirtschaft)의 규정을 근간으로 그에 따른 인증 시험 항목에 대해 기술하기로 한다. 또한 실제 (주)카코 뉴 에너지의 BDEW 인증 시험 자료의 일부분을 바탕으로 시험의 중요성 및 필요성에 대해 그 타당성을 입증한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.397-404
• /
• 2023

This paper designs a wind turbine test site based on international regulations for the certification of wind turbine prototypes. The maximum height of the meteorological mast installed at the test site is 140m, and power facilities capable of testing up to three wind turbines of 5MW or more are installed. The weather resources measured at the mast can be recorded and analyzed using a monitoring system. Wind turbine manufacturers can use this test site during the certification period, and the installed wind turbines can be used for continuous power generation projects. Therefore, this test site can provide fundamental data for measuring the long-term performance and durability of wind turbines, which can be used to improve models or develop new wind turbines.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.173-180
• /
• 2014

In this paper, the instrument flight certification process and flight test results of Korean Utility Helicopter (KUH) are presented. For the instrument flight certification, the suitability of installed equipments and instruments have been reviewed and verified by ground and flight tests. Next, static and dynamic stability test are conducted in accordance with FAR-29 Appendix B. The static stability is determined by the change of speed and attitude according to control inputs. The dynamic stability is evaluated by how quickly the response of the helicopter due to long and short period control inputs are decreased. The pilot workload evaluation are also carried out by simulated IMC flight tests. This paper presents the workload assessment results when some failures are occurred at cockpit instruments, engine or flight control systems as well as the normal situation. After the simulated IMC flight test is completed, actual instrument flight test are conducted in a real IMC environment according to the air traffic controls.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.487-499
• /
• 2021

Purpose:The purpose of the paper is to review the problems of performance enhancement of safety certification standards and to suggest directions for improvement in order to rationalize safety certification standards for future industrial development and environmental changes. Method: The problems and limitations of the safety certification system are summarized through literature review and interview with manager, and the status of safety certification standards is classified into design standards, performance standards, and detailed standards, and the status analysis is performed. In addition, by synthesizing the results of the investigation and analysis, improvements are suggested to improve the performance of the safety certification standards. Result: Through the survey, the problems and limitations of safety certification could be grouped into six categories: government-led certification system operation, standardized certification standards, long time required to improve certification, poor certification standards preparation system, and lack of reflection of industry opinions. And, as a result of analyzing the certification standards by dividing them into performance and design standards, in the case of machinery, equipment, and protection devices, the design standards were high at 69.7% and 64.9%, whereas in the case of protective equipment, the performance standards were high at 61.1%. In order to improve the performance of safety certification standards centered on design standards, it is necessary to determine the possibility of performance enhancement of the certification standards and determine the feasibility of the inspection test method. In order to improve performance, it was reviewed that it was necessary to establish a systemic foundation and infrastructure, such as strengthening the Product Liability Act, systematizing market monitoring, etc., distributing certification test tasks, and participating in the preparation of certification standards by the private sector. Conclusion: Through this study, the problems and limitations of Korea's safety certification system were summarized and the necessity for performance improvement was reviewed. Performance improvement of safety certification standards is a matter that requires preparatory work, such as legislative revision and infrastructure construction, and requires mid-to-long-term promotion. In addition, rather than improving the overall safety certification standards, the performance requirements for each item subject to certification should be reviewed and promoted, and details should be specified through additional research.

• Proceedings of the SAREK Conference
• /
• 2006.11a
• /
• pp.69-69
• /
• 2006

• Ecology and Resilient Infrastructure
• /
• v.3 no.2
• /
• pp.92-99
• /
• 2016

This study developed a verification and certification method of technologies of green infrastructure (GI) and low impact development (LID) that gained interest recently. The outdoor testbed used in this study consisted of a building type, a road type, a parking lot type, a rain garden type and a bioretention type. Indoor test facilities were ready for testing using hydrology efficient analysis, pavement and soil analysis and water environment analysis. The development of outdoor and indoor test facilities were used to certify the efficiency of GI & LID technologies, and this was expected to contribute to the activation of the related projects by providing reliable data for the application of GI & LID techniques.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.815-825
• /
• 2023

Purpose: This paper aims to explore approaches for obtaining KOLAS certification for masks developed as protective equipment for use during evacuation processes in the event of a radiation disaster involving residents within a radiation emergency planning zone. Method: Various reports, papers, and data from the KOLAS accreditation bodies' websites were examined for this study. Result: Although domestic radiation disaster preparedness measures have been established to enhance resident protection, the distribution of protective equipment is limited to thyroid protection drugs. Supplementary support items like masks are necessary to prepare for radiation disasters. Currently, there is no KOLAS-accredited certification body for radiation protection masks. Conclusion: For masks that have established performance certification criteria, a dual process is required for KOLAS certification. This involves obtaining an official test report as an industrial respirator mask, receiving certification, and then obtaining a general test report based on internal standards.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.185-193
• /
• 2021

The system needs to be modified to improve the performance of the aircraft in operation or to satisfy the requirements of related laws. Appropriate standards are required for the technical skills for remodeling the aircraft system, design verification for airworthiness of the aircraft, and supplemental type certification (STC) certification procedures for type certification. This study analyzes the current status and demand of domestic aircraft remodeling, examines the current supplementary type certification procedure, and diagnoses the problem. In addition, as a result of researching measures to improve remodeling technology and certification capabilities to extend the life of the aircraft, improvements in the education system were derived to improve the domestic additional type certification process, such as approval of remodeling agencies and appointment of qualifications for each professional technician.