• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.50-56
• /
• 2019

This study aims to make artificial stone by recycling blast furnace slag powder, red mud and recycled aggregate, which are known as industrial waste. Recycled aggregate is a typical construction waste, and various recycled products such as concrete block are being sold. In this study, we tried to make artificial stone mixed with waste such as recycled aggregate, and experimented with the use of artificial stone and further study. As the red mud replacement ratio increased, the absorption ratio, fluidity and air content of the matrix were measured to be decreased, and the strength and density were found to increase. The fluidity and absorption ratio decreased with increasing the replacement ratio of recycled aggregate, and the air quantity, rate of aggregate on the surface, density and intensity increased to a certain level. Therefore, this study intends to make artificial stone using recycled resources and conducted basic experiments for further study.

• Journal of Chest Surgery
• /
• v.35 no.5
• /
• pp.369-374
• /
• 2002

Background: Proper construction of vascular access and adequate maintenance are essential for the prognosis of the hemodialysis patients. Though arteriovenous fistula using autogenous vessel is the first of choice, the incidence of arteriovenous fistula using artificial graft is gradually increasing. The aim of this study was to analyse the patency rates between autogenous and artificial fistula, among artificial graft types, according to the accompanied disease. Material and Method: A retrospective study was conducted on 186 patients who underwent 292 arteriovenous fistula operations for hemodialysis at Korea University Guro Hospital between 1996 and 2000. Mean age of the patients was 54.37 $\pm$ 12.79years, and the male: female ratio 99:87. Result: Among 292 operations, there were 156 autogenous fistula and 116 graft fistula. The other 20 operations were thrombectomy, takedown of graft, revision, and balloon dilatation. Patency rates of autogenous fistula were 92.78 $\pm$ 2.35% at 1 year and 39.03$\pm$9.08% at 5 years, and those of graft fistula were 96.09 $\pm$ 2.22% at 1 year and 16.45 $\pm$ 10.15% at 5 scars. However, there was no statistical significance between the two operations. The patients who had hypertension, diabetes or both had no statistical significance in the patency rate compared to that of patients without underlying disease. In addition, the type of graft used did not affect the patency rate. Second operation was needed in 62 patients and third operation in 31 patients, but their patency rate again had no statistical significance compared to that of the first operation. Conclusion: The patency of the artificial graft fistula was comparable to the autogenous fistula, but the patency according to types of graft need to be studied further. Furthermore, the underlying diseases did not affect the fistula patency.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.2
• /
• pp.307-314
• /
• 1993

섬유소비는 인구증가 및 경제발전 정도와 밀접한 상관관계를 가지고 있으며, 여러 산업과도 연관되어 있다. 천연섬유와 인조섬유와의 시장 점유 경쟁은 인조섬유가 처음 일반에게 소개된 20세기 초부터 시작되었고, 그후 인조섬유의 품질향상과 신섬유의 개발로 더욱 가열되었다. 섬유의 시장점유율은 가격, 품질 등 여러 요인으로부터 영향을 받으며, 지역적 특성에 따라서도 많은 차이를 보이고 있다. 본 연구는 한국에서의 주요 섬유의 시장점유율을 분석하고, 또한 이를 다른 지역과 비교하는 것을 주요 목적으로 하였다. 시장점유율은 한국과 미국, 기타 선진국, 개발도상국에서의 면, 양모, 재생 cellulose 섬유, 합성 섬유의 1979년부터 1986년까지의 연간 내수용 소비량을 기초로 하여 산출되었다. Minimum Absolute Deviations method를 사용하여 Markov process에 의거한 이전확률(transition probability)을 구하였다. 한국의 섬유시장은 주요섬유의 시장점유율의 크기와 변화 그리고 이전화률면에서 미국의 섬유시장과 유사하였으며, 개발도상국과는 차이를 보였다. 또한, 같은 선진경제임에도 불구하고 미국의 섬유시장은 기타 선진국과는 차이점을 보임으로써 지역에 따른 섬유 선호성과 다른 요인들이 섬유 소비에 영향을 미친다는 것을 시사하였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.3 no.1
• /
• pp.77-81
• /
• 1974

1. Studies were made on enriching protein and protein score of rice with soybean, millet and sweet potato. 2. Imitation rice made from upper 3 or 2 was added to rice by $20{\sim}30%$, then the protein content of the resulting mixed foods was more than 10%, lipid more than 2.5%, protein score more than 85. 3. Cooked with rice, the imitation rice was acceptable in the point of color, flauor and taste.

• 발명특허
• /
• v.8 no.5 s.87
• /
• pp.28-30
• /
• 1983

• Asian Journal of Turfgrass Science
• /
• v.20 no.2
• /
• pp.203-211
• /
• 2006

This study was initiated to investigate the difference of playing ability among soccer fields established with natural turfgrass, artificial turf and bare ground. The soccer fields with natural turfgrasses were established with cool-season grass(Kentucky bluegrass 80%+Perennial ryegrass 20%) and zoysiagrass. The artificial turf field was constructed with Konigreen $DV5000^{TM}$. Bare ground was sandy soil. Data such as ball rolling distance and vertical ball rebound were collected at the Sports Science Town of Konkuk University from 2005 to 2006. A ball in the study was Hummel Air Vision #1, certified by KFA(Korea Football Association) in ball pressure of 1.01b. Ball rolling distance was the longest on bare ground(13.6m), followed by artificial grass(11.4m), cool-season grass(7.8m) and zoysiagrass(4.7m). It decreased with lower frequency in use, stronger rigidity and higher density of turfgrass. Vertical ball rebound was the highest on bare ground(1.0m), followed by artificial grass(0.9m), cool-season grass(0.6m) and zoysiagrass(0.4m). It was lower under conditions of low use frequency, strong rigidity, and high density. Both ball rolling distance and vertical ball rebound were not greatly affected by cool-season grass maintained with high intensity of culture by years after establishment. However, zoysiagrass field under low intensity of culture showed longer in ball rolling distance and higher in vertical ball rebound with time after establishment.

• Clean Technology
• /
• v.25 no.2
• /
• pp.114-122
• /
• 2019

The synthesis of bio polyol from renewable resources has attracted attention in recent years. In particular, it is important to take advantage of bio polyols in the synthesis of polymers. In this study, a series of dimethylformamide (DMF) based polyurethanes were synthesized using polycarbonate polyol/bio polyol (PO3G: polytrimethylene ether glycol prepared from 1, 3-propanediol produced by fermentation from corn sugar), methylene diphenyl diisocyanate (MDI) and 1,4-butandiol (BD). The properties of prepared polyurethane films and the cell structure of wet type artificial leather were investigated. As the bio polyol content increased, the tensile strength of polyurethane films decreased, however, the elongation at break increased significantly. As a result of thermal characteristics analysis, the glass transition temperature of polyurethanes increased when increasing the content of polycarbonate polyol. As a result of comparing the cell characteristics of wet type artificial leathers prepared in this study, it was found that the number and uniformity of cells formed in the artificial leather samples increased when increasing the content of polycarbonate polyol in polycarbonate polyol/bio polyol. From these results, it was found that DMF-based polyurethane containing an appropriate amount of bio polyol could be used for wet type artificial leather. The bio textile analysis system according to ASTM standard was used to measure the bio carbon content of polyurethane. The content of bio carbon increased proportionally with the increase of bio polyol content used in polyurethane synthesis.

• Journal of the Korean Society of Radiology
• /
• v.84 no.1
• /
• pp.197-211
• /
• 2023

Purpose To evaluate the circuit patency after nitinol bare-metal stent (BMS) placement according to the type of access and location of the stent in dysfunctional hemodialysis access. Materials and Methods Between January 2017 and December 2019, 159 patients (mean age, 64.1 ± 13.2 years) underwent nitinol BMS placement for dysfunctional access. The location of stents was as follows: 18 brachiocephalic vein, 51 cephalic arch, 40 upper arm vein, 10 juxta-anastomotic vein, 7 arteriovenous (AV) anastomosis, and 33 graft-vein (GV) anastomosis. Circuit patency was evaluated by the Kaplan-Meier method, and cox regression model. Results A total of 159 stents were successfully deployed in 103 AV fistula (AVF) and 56 AV graft (AVG). AVG showed lower primary and secondary patency at 12-months compared with AVF (primary patency; 25.0% vs. 44.7%; p = 0.005, secondary patency; 76.8% vs. 92.2%; p = 0.014). Cox regression model demonstrated poorer primary patency at 12 months after stenting in the cephalic arch and GV anastomosis compared with the other sites. Conclusion AVF showed better primary and secondary circuit patency at 12 months following the placement of BMS compared with AVG. Stents in the cephalic arch and GV anastomosis were associated with poorer primary patency at 12 months compared to those in other locations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.15-16
• /
• 2015

Natural stone causes environmental pollution when it is collected and processed. Also, it is hard to make consistent products. Therefore, this study focuses on the artificial stone with waste porcelain to replace natural stone. The flexural strength and compressive strength are lower according to the replacement ratio of blast furnace slag in the result of experiment.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.150.1-150.1
• /
• 2005