• Journal of Chest Surgery
• /
• v.30 no.2
• /
• pp.213-218
• /
• 1997

Pseudoaneurysm of the thoracic aorta is potentially fatal. However, reports of such cases are rare even in large series. We report four cases of thoracic aortic pseudoaneurysm who underwent surgical repair, The causes were considered as infection in two cases (VSD repair, descending thoracic aortic aneurysm resection) and blunt chest trauma by traffic accident in two patients. The pseudoaneurysms developed on ascending aorta suspected as sites of arterial and cardiolplegic needle insertion in one patient. The others were located at descending thoracic aorta immediatly below the left subclavian artery. One patient died of sepsis associated with bile peritonitis and others were followed up from 10 to 18 months with specific morbidity. This study suggest that the incidence of pseudoaneurysm of the thoracic aorta followed by open heart or aorctic surgery can be repaired succesfuly and careful inspection of associated injury is very important in cases of traumatic thoracic pseudoaneurysm.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.829-831
• /
• 2009

폐기물, 석탄 등 다양한 시료의 가스화 반응을 통해서 발생되는 합성가스는 CO, $H_2$, $CO_2$가 주성분으로 가스엔진, 가스터빈 등의 연료로 사용하여 발전하거나 합성반응을 통해 다양한 화학원료로의 전환이 가능하다. 또한 폐기물, 석탄 등의 다양한 원료의 가스화 반응에 의해 발생한 합성가스로부터 F-T(Fischer-Tropsch) 합성을 통한 인조합성석유, Non F-T 합성을 통한 메탄올, DME(Dimethyl Ether) 등을 제조할 수 있으며, 메탄화 반응을 통해 대체천연가스(SNG, Substitute Natural Gas)로 제조하여 활용하는 방안도 가능하다. 또한 현재 상업용 규모의 수소 제조 방법 중에서 가장 경제적인 방법으로 천연가스를 개질하여 CO, $H_2$가 주성분인 합성가스를 만든 다음 수성가스 전환, PSA(Pressure Swing Adsorption)통해 $CO_2$와 $H_2$를 분리하여 생산하고 있으나, 천연가스 가격의 상승 및 다양한 시료로부터 향후 경제성 확보가 가능한 수소 제조 방법에 대한 연구가 진행되고 있으며, 석탄 가스화 및 폐기물 가스화를 통해 얻어진 합성가스로부터의 수소 제조 공정이 개발 및 상업화 추진되고 있다. 본 연구에서는 폐기물 가스화를 통해 발생한 합성가스에 대하여 수성가스 전환 반응을 통한 수소 생산 특성 및 수성가스 전환 반응의 공간속도 변화 및 스팀주입량 변화에 따른 반응 특성을 고찰하였다.

• Journal of Chest Surgery
• /
• v.42 no.1
• /
• pp.100-103
• /
• 2009

Traumatic rupture of the thoracic aorta is the second most common cause of death from motor vehicle accidents after head injury. About 85% of these patients do not survive to reach the hospital. The most common mechanism for this is deceleration injury, as occurs in a high speed motor vehicle accident. The aortic isthmus is the site of disruption for about 95% of all blunt thoracic aortic injuries. Another mechanism is crush injury which causes compression of the aorta between the displaced sternal body or manubrium and the thoracic vertebral column. These forces tear the inner layer of the aortic wall at an unusual location. We report here on a case of aortic arch dissection where the injury clearly occurred due to a crush injury and not because of deceleration. The surgical repair was delayed for 10 days after administering intensive medical therapy. The ascending aorta and aortic arch were replaced with an artificial graft with the patient under circulatory arrest and cerebral protection.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.275-278
• /
• 2009

Leiomyosarcoma of the inferior vena cava (IVC) is a rare malignant tumor. Yet tumors of a smooth muscle origin are the most common primary neoplasms of the major veins, and the inferior vena cava is the most common site of origin. We report here on a 65-year-old female patient who had been suffering from dyspnea and abdominal discomfort for 3 weeks before admission. The abdominal computed tomography (CT) scan and IVC cavogram showed an IVC mass extending from the right atrium to above the level of the right renal vein, obstructing the IVC, and the radiological findings were suggestive of an IVC leiomyosarcoma. We resected the tumor and reconstructed the IVC with a patch PTFE graft. The follow-up abdominal CT revealed no recurrence and obstruction of the IVC for 6 months after the operation.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.72-72
• /
• 2012

본 연구에서는 친환경 리싸이클 섬유산업의 활성화를 위해 대학생들의 리싸이클 폴리에스터 섬유에 대한 인식도를 분석해 보고자 하였다. 측정 문항은 섬유전문가 3인의 검토를 거쳐 타당성을 확보하였으며, 조사는 질문지법으로 2011년 9월 1일부터 9월 10일까지 대전 거주 대학생을 대상으로 진행하였으며, 회수된 설문지 196부를 자료 분석에 이용하였고, SPSS 19 통계 패키지를 이용하여 자료를 통계분석하였다. 연구 결과는 다음과 같다. 1. 친환경적 의생활 실태 조사를 실시한 결과, 리싸이클 PET섬유에 대해 들어본 적이 있는 사람은 조사대상자의 27.6%로 나타났고, 그 정보원으로는 인터넷을 가장 많이 이용하는 것으로 나타났다. 2. 섬유소재별 친환경성에 대한 인식도를 조사한 결과, 대학생들은 리싸이클 PET섬유가 천연섬유보다 덜 친환경적이나, 인조섬유보다는 더 친환경적이라고 인식하는 것으로 나타났다. 3. 리싸이클 PET섬유에 대한 인식도를 요인분석한 결과, <친환경성 요인>, <촉감 요인>, <내구성 요인>, <기능성 요인>, <공정 요인>, <글로벌 경쟁력 요인>및 <부가가치성 요인> 등 7개의 요인이 도출되었는데 이는 대학생들은 리싸이클 PET섬유에 대해 친환경성, 촉감, 내구성, 기능성, 공정, 글로벌경쟁력, 부가가치성순으로 중요하게 인식하는 것으로 해석된다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.117-117
• /
• 2012

Dyeing and fastness properties of 800nm sea-Island type PET nanofilament fabrics have been investigated. The dye uptake of nanofilament commended at lower temperatures and showed faster rate of dye uptake. The build up and wet fastness propertied of disperse dye on nanofilament were relatively poor since the more dye was needed to achieve a given depth of shade due to the large surface area.

• The Journal of the Korea Contents Association
• /
• v.17 no.3
• /
• pp.666-674
• /
• 2017

Today, the term of fusion, such as technology convergence and industrial convergence, is emerging as one of the most important trends in our society. The purpose of this study is to analyze the convergence coefficient of each industry using patent data and to analyze the convergence phenomenon in industry based on convergence coefficient. To do this, 2011-2015 Korean patent data were utilized. The research findings revealed that the ICC by industry was the highest in order of man-made fibres, paints/varnishes, petroleum products/nuclear fuel and other chemicals. Also, according to the inter-industry convergence matrix, the number of convergence patents was the greatest in order of office machinery and computers, special purpose machinery industries and Measuring instruments. Added same analysis was conducted through Industry with high number of patents. As a result, the convergence has been actively carried out in the fields of optical instruments, Basic chemical, Fabricated metal products, Measuring instruments and special purpose machine manufacturing industries.

• Journal of the Korean Institute of Gas
• /
• v.24 no.3
• /
• pp.40-46
• /
• 2020

Tertbutylperoxymaleate is the one of the organic peroxides used as a raw material of initiator formulations of artificial marble manufacturing. In this study, the thermal decomposition characteristic of TBPM was evaluated using the differential scanning calorimeter in the air and nitrogen circumstance. Regardless of the reaction atmosphere, TBPM showed the exothermic peak due to the drastic decomposition reaction below 130 ℃. The activation energy estimated by dynamic methods had a range of 203~217 kJ/mol and that estimated by model-free analysis method had a range of 118~232 kJ/mol with a thermal conversion. And the ADT₂₄, the temperature that lead to the maximum heating rate within 24 hours, was evaluated as (80~95) ℃ using the estimated activation energy.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.2
• /
• pp.119-131
• /
• 2001

A total of 328 ambient PM-10 samples was collected by a PM-10 high volume air sampler during the periods of February 1997 to February 1999 from Kyung Hee University at Suwon Campus. The samples were analyzed for their bulk chemical compositions(Cu, Fe, Pb, Zn, Al, $Na^{+}$, $NH_{4}^{+}$, $K^{+}$, $Ca^{2+]$, $Mg^{2+}$, $Cl^{-}$, $NO_{3}^{-}$, and $SO_{4}^{2-}$ by both an atomic absorption spectrophotometer and an ion chromatograph. The purpose of this study was t develop a receptor methodology for quantitative assessment of PM-10 sources. The data obtained from this study were ex-tensively examined using the target transformation factor analysis(TTFA) and the chemical mass balance (CMB). When TTFA was initially applied seasonal basis. five sources(such as automobile-related, sulfate-related, incine-ration, soil and combustion-related) were identified both during winter and fall. Since the total number and the type of sources were resolved by TTFA for the four seasons, CMB was employed to cross-check the results of TTEA. The total of six source categories identified by TTEA was intensively investigated on the basis of source profiles acquired from various source libraries established both in Korea and abroad. The results of this study showed the applicability of two popular receptor models as a new methdology for quantitative assessment PM-10 sources in Korea. Seasonally segmented data sets with the combined application of TTFA and CMB yielded a physically reasonable source apportionment result and provided a mean to increase the number of potential sources. Furthermore, this study suggested the possibility of the CMB application to ambi-ent data from Korea after identifying potential sources through traditional factor analysis.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.1
• /
• pp.11-23
• /
• 1998

The purpose of this study was to survey chemical distribution of inorganic elements and ions in the submicron particles, to characterize qualitatively emitting sources by factor analysis, and finally to reveal existing patterns in terms of chemical compounds by a stepwise multiple regression analysis. Total of 141 samples were collected by a cascade impactor from 1989 to1996. Fifteen chemical species (Al, Ba, Cd, K, Pb, Cu, Fe, Ni, $Cl^-, NO_3^-, SO_4^{2-}, K^+, Mg^{2+}, Ca^{2+}, and Na^+$) were characterized by AAS and IC. The study showed that average seasonal levels of submicron particulate matters $(d_p<0.43 \mum)$ were 18.7 $\mug/m^3$ in spring, 15.5 $\mug/m^3$ in summer, 15.7 $\mug/m^3$ in fall, and 24.5 $\mug/m^3$ in winter, respectively. All of the anion concentrations in the particle were highest in the winter season. By applying a factor analysis, 5 source patterns were qualitatively obtained, such as sulfate related source, nitrate related source, oil burning source, calcium related source, and coal combustion source. Finally, when applying a stepwise multiple regression analysis, the results clearly showed that $Na^+ and Ca^{2+}, K^+ and Ca^{2+}, NO_3^-$ and relative humidity, $Cl^-$ and ambient temperature, $Ca^{2+} and Cl^-, Mg^{2+} and SO_4^{2-}, Na^+ and NO_3^-, and Ca^{2+} and NO_3^-$, respectively, are negatively contributed to each other. As a result of those statistical analysis, we could suggest that some chemical compounds in the submicron particles such as$NaNO_3, MgSO_4, Ca(NO_3)_2, and CaCl_2$ may not exist on the filter as final composing products; however, other compounds may possibly exist in the form of $Mg(NO_3)_2, CaSO_4, Na_2SO_4, K_2SO_4, MgCl_2, NaCl, and KCl$. Thus, it must be necessary to identify differences between the results of above statistical analysis and of the real world by laboratory experiments.