• Fire Science and Engineering
• /
• v.17 no.2
• /
• pp.35-42
• /
• 2003

In this study, we tried to evaluate the ignitibility, flammability, heat release rate, and toxicity of five different types of burning artificial leather sofa covers that are widely used in entertainment service industry buildings. As the results of this study, putting the artificial leathers under fire conditions we found out following results auto-ignition temperature was$ 427~437^{\circ}C$, limiting oxygen index was 19~20%; at heat flux of $25 kW\m^2$, ignition time was 10~16s and peak heat release rate was $147~277 kW\m^2$; and at heat flux of$ 35 kW\m^2$, ignition time was 6~9s and peak heat release rate was $176~296 kW\m^2$. The toxic materials discharged from the burning leathers were 5,550~6,290 ppm of CO, 18,500~23,400 ppm of $CO_2$, 110~140 ppm, of HCl, 13~65 ppm of HCN and 145~220 ppm of NOx.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.3
• /
• pp.294-305
• /
• 2012

The objective of this study is to estimate the chemical compositions and to identify qualitative sources of fall-out particles in study area. Also, this study used a spatial analysis to estimate spatial distributions and average deposition flux. In this study, the chemical compositions of fall-out particle samples collected at Muncheon lake from May 2010 to January 2011 were analyzed by ICP and IC. The monthly trend of deposition fluxes for fall-out particles showed highest in June ($107.61kg/km^2/day$) and lowest in October ($22.22kg/km^2/day$). The average fluxes of Fe, Si, Al, Zn and Ba are 0.44, 0.24, 0.20, 0.17, $0.09kg/km^2/day$, respectively. Also, the average fluxes of $NO_3^-$, $SO_4^{2-}$, $NH_4^+$, $Ca^{2+}$, and $Na^+$ are 6.48, 5.01, 4.96, 1.75, $1.37kg/km^2/day$, respectively. A Factor analysis identified four sources such as 1) nonferrous metal, motor vehicle, and agriculture, 2) soil, 3) field burning, incineration, and 4) road dust and oil burning. The IDW (inverse distance weighting) spatial analysis method was used to estimate spatial distribution and average deposition flux for fall-out particles. A total average deposition fluxes estimated in Muncheon lake were 936.15 kg/month. The spatial distribution trend of deposition flux showed higher at site 1 and 2 than at site 3, 4 because local road is adjacent to the site 1 and 2.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.185-185
• /
• 2016

아크릴계 수지(resin)에 인조 흑연과 탄소나노튜브(carbon nanotube)를 1:1 비율로 혼합한 충전제(filler)와 용제(solvent) 및 기타 첨가제(additives)를 혼합하여 방열도료를 제조하여 수직방향 열전도도를 상온에서 평가하였다. 충전제의 함량을 1, 2, 5 중량 %로 변화시키며 원료들을 준비하여 교반기로 혼합한 뒤 3단 롤 밀(three roll mill)로 분산공정을 진행하여 3 종류의 도료를 제조하였다. 제조한 도료를 가로 11 mm, 세로 11 mm, 두께 0.4 mm의 Al 5052 알루미늄 기판에 스프레이 코팅 방식으로 도포한 후 $150^{\circ}C$에서 30분 동안 열경화 건조 과정을 거쳐 샘플을 제작하였다. 측정 시료의 형상은 대략적으로 Fig. 1과 같다. 열전도도는 식 $k={\alpha}{\cdot}C_p{\cdot}{\rho}$를 사용해서 계산된다. 여기서 k는 열전도도($W/m{\cdot}K$), ${\alpha}$는 열확산계수($mm^2/s$), $C_p$는 비열($J/kg{\cdot}K$), ${\rho}$는 밀도($g/cm^3$)를 나타낸다. 열확산계수는 독일 NETZSCH 사의 Laser Flash Analysis 장비(모델명 LFA 457)를 사용하여 측정하였는데, 기판 뒤쪽에서 레이저를 조사하고 도료층 전면에서 적외선 온도센서를 통해 시간에 따른 온도 상승곡선을 구한 후, 두 물체의 계면에서의 접촉 열저항(contact thermal resistance)을 감안하여 장비에 내장되어 있는 소프트웨어로 열확산계수가 계산된다. 비열은 같은 회사의 DSC(Differential Scanning Calorimetry) 200 F3 장비를 사용해 측정했으며, 밀도는 부피와 질량을 측정한 값을 이용하여 계산하였다. 도료를 도포하지 않은 bare Al plate에 대해서는 쉽게 열확산계수, 비열, 밀도를 측정하여 열전도도를 구할 수 있다. 도료가 코팅된 샘플에 대해서는 도료층을 일부 떼어내 비열을 측정하고, 밀도를 구한 후, 도료층의 열전도도가 2-layer 법으로 장비 내장 소프트웨어로 계산된다, 이때 Al 기판의 열확산계수, 비열, 밀도는 미리 측정한 bare Al plate의 값을 적용하였다. 실험 결과를 Table 1에 정리하였다. 흑연과 탄소나노튜브를 혼합한 충전제를 함유한 아크릴 복합체 박막에서 측정된 열전도도는 보통 고분자 재료의 열전도도 값의 상한 영역에 육박하는 값이며, 충전제 함량이 증가할수록 열전도도가 증가하는 경향을 보이고 있다.

• 한국해양학회지
• /
• v.22 no.4
• /
• pp.257-270
• /
• 1987

Fouling communities developing in Jinhae Harbor and Masan Bay were studied by slide and panel immersion test during the period from Dec., 1982 to Nov., 1983. The total viable count of bacteria was estimated more than 1.7${\times}$ 10$\^$4/CFU/$\textrm{cm}^2$ after 15 days of immersion and 46 taxa of benthic diatoms were classified in micro-community. Progressional change of fouling communities was clearly shown and dominant diatom species are Licmophora flavellata, Navicula grevillei, and Nitzschia closterium Major macrofouling organisms are Mytilus edulis, Balanus amphitrite amphitrite, Hydroides ezoensis, and Celleporina sp. Wet weight production of macrofouling organisms exceeds 500g/100cm$\^$2/ after 5months of immersion. Regional defferences in community development are clearly shown in two study areas, and mainly due to the disparities of physicochemical stability and nutritional status of ambient water. Seasonality of larvae and the growth rate are the important factors in fouling community development. Overall process of community development is as follow : bacteria and diatoms-multicellular algae-barnacle, mussels and polychaete-sponge, anemone and ascidian.

• Journal of Chest Surgery
• /
• v.9 no.2
• /
• pp.245-250
• /
• 1976

A 33 year-old man was admitted with chief complaints of severe sharp pain on left upper interscapular region and motor weakness of left arm for 9 days. He had a history of blunt trauma over left shoulder about 3 years ago. Physical examination showed a ping pong ball sized mass which was located at the left supraclavicular area and was firm, fixed, and nonpulsatile. No bruit or murmur was obtained over the mass. Ipsilaterally, radial, ulnar, and brachial pulse were very weak and ptosis and anhidrosis were noticed. Neurologic examination revealed moderate or severe weakness of flexion and extension of left elbow, wrist and fingers, and anesthesia of the skin in left C8-T1 dermatome and hypalgesia in left C6-C7 dermatome. Retrograde aortography demonstrated complete obstruction of left subclavian artery. An exploratory operation was performed through the left 4th intercostal space. It was found that the mass was a left subclavian aneurysm of traumatic false type. Proximal and distal ligation of the aneurysm were applied and the sac was partially removed. The continuity of the subclavain artery was established by the use of a 6mm. Dacron graft from the root of the subclavian to the axillary artery. Postoperatively the patient was improved from the circulatory and neurologic disturbances.

• Journal of Chest Surgery
• /
• v.37 no.9
• /
• pp.796-799
• /
• 2004

A 52 day-old male infant who had Taussig-Bing anomaly with coarctation of the aorta underwent initial palliative Damus-Kaye-Stansel (DKS) procedure including arch reconstruction because of suspected intramural coronary artery, size discrepancy of great arteries, potential subaortic stenosis, refractory pneumonia, and severe congestive heart failure. Total repair was done 44 months later, which was composed of VSD patch closure, DKS take-down, and arterial switch procedure, We report a successful case of DKS take-down and arterial switch operation for the reuse of native aortic and pulmonary valves rather than Rastelli-type procedure in a patient with Taussig-Bing anomaly having palliative DKS procedure.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.719-731
• /
• 2003

In order to maintain and manage ambient air quality, it is necessary to identify sources and to apportion its sources for ambient particulate matters. The receptor methods were one of the statistical methods to achieve reasonable air pollution strategies. Also, receptor methods, a field of chemometrics, is based on manifold applied statistics and is a statistical methodology that analyzes the physicochemical properties of gaseous and particulate pollutant on various atmospheric receptors, identifies the sources of air pollutants, and quantifies the apportionment of the sources to the receptors. The objective of this study was 1) after obtaining results from the PMF modeling, the existing sources of air at the study area were qualitatively identified and the contributions of each source were quantitatively estimated as well. 2) finally efficient air pollution management and control strategies of each source were suggested. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols, the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided quantitative source contributions (scaled G matrix) and source profiles (scaled F matrix). The results of the PMF modeling showed that the sources were apportioned by secondary aerosol related source 28.8 ％, soil related source 16.8％, waste incineration source 11.5%, field burning source 11.0%, fossil fuel combustion source 10%, industry related source 8.3％, motor vehicle source 7.9%, oil/coal combustion source 4.4％, non-ferrous metal source 0.3％. and aged sea- salt source 0.2％, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.701-717
• /
• 2003

The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.52-52
• /
• 2011

나노필라멘트는 단면직경이 수백 나노미터에서 수십 나노미터 수준인 초극세 장섬유를 말하며, 해도형 복합방사로 얻어진 섬유를 알칼리 감량을 통해 해성분을 용출하여 도성분에 해당하는 나노필라멘트를 얻는다. 이러한 나노필라멘트사는 초극세와 마찬가지로 단위중량당 표면적이 크고, 작은 굴곡반경 및 낮은 굴곡 반발성으로 인하여 일반 합성섬유에 비하여 고가성 및 새로운 기능성을 부여하는 제품에 응용 될 수 있다. 특히 나노필라멘트를 이용한 편물제품으로 경편물은 wiping cloth 등 산업용도에 적용되며, 환편물은 인조피혁 등 의류용으로 사용된다. 나노필라멘트 편물은 원사섬도, 편물의 조직, 밀도 및 중량 등에 따라 분할율과 용출 특성이 상이하므로 후가공 공정에 있어서 감량공정은 매우 중요하다. 또한 나노필라멘트와 같은 세사의 경우 일반사보다 비표면적이 증가하여 동일한 염색조건에서 옅은 색상을 나타낸다. 이로 인해 같은 색상을 위하여 보다 많은 염료를 투입해야 하며, 결과적으로 견뢰도 문제가 발생할 우려가 있다. 이 연구에서는 해도형 나노필라멘트 PET 원사와 일반 PET사를 복합한 2종의 편물을 이용하여 알칼리감량특성 및 3가지 분산염료에 대한 염색성과 견뢰도를 조사하였다. 알칼리 처리조건에 따른 감량률을 측정함으로써 각 편물의 이론 감량률에 도달하는 지점을 확인하고, SEM사진 분석을 통하여 해도사의 감량정도 및 분할특성을 확인하였다. 나노필라멘트 편성물은 염료농도가 증가함에 따라 지속적으로 K/S 값이 증가하였으나, 전체적으로 낮은 K/S값을 얻었다. 또한 염색온도가 110에서 $100^{\circ}C$로 증가함에 따라 K/S값이 감소하였는데, 이는 고온에서 분산염료가 나노필라멘트로부터 일반 PET사로 이염이 더 많이 발생하였기 때문이라고 생각된다. 세탁견뢰도의 경우 양호 또는 우수하였으나, 일광견뢰도의 경우 1등급으로 매우 낮아 이를 개선하기 위한 노력이 향후 진행되어야 할 것이다.

• Journal of Chest Surgery
• /
• v.38 no.3 s.248
• /
• pp.241-244
• /
• 2005

A 57-year-old man with numbness and paresthesia of left arm is presented. There was no pulse in the left arm was absent and his chest radiograph suggested right-sided aortic arch. The aortogram showed right-sided aortic arch with Kommerell's diverticulum. The proximal portion of left subclavian artery was totally occluded and blood was being supplied through vertebral arteries to distal subclavian artery. He underwent bypass grafting between both subclavian arteries by an expanded polytetrafluoroethylene graft. Because the size of Kommerell's diverticulum was small, it need to be observed closely.