• Journal of Broadcast Engineering
• /
• v.27 no.5
• /
• pp.773-793
• /
• 2022

The moving picture experts group (MPEG) immersive video (MIV) coding standard has been established to support six degrees of freedom (6DoF) in virtual reality (VR) by transmitting high-quality multiple immersive videos. The MIV exploits two approaches considering tradeoff between bandwidth and computational complexity: 1) eliminating correlation between multi-view videos or 2) selecting representative videos. This paper presents performance analysis on intermediate synthesized views on source view positions and synthesized pose traces using high-efficiency video coding (HEVC) and versatile video coding (VVC) for above-mentioned two approaches.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.6-9
• /
• 2020

최근 몰입형 가상 현실을 제공하기 위한 360 도 영상 전송 기술이 활발히 연구되고 있다. 그러나 현재 가상현실 기기가 가지는 연산 능력 및 대역폭으로는 고화질의 360 도 영상을 전송 및 재생하기에 한계가 있다. 해당 문제점을 극복하기 위해 본 논문에서는 사용자 시점의 고화질 360 도 영상 제공을 위해 사용자 시점 타일을 추출하는 움직임 제한 타일 셋 기반 타일 추출기를 구현한다. Versatile video coding (VVC) 기반 타일 인코더를 이용해 360 도 영상에 대한 비트스트림을 생성한 후, 사용자 시점에 해당하는 타일들을 선택한다. 이후 선택된 타일들은 제안하는 타일 추출기에 의해 추출되고 전송된다. 또한, 전체 360 도 영상에 대한 저화질 비트스트림을 전송하여 갑작스러운 사용자 시점 변경에 대응한다. 제안된 타일 추출기를 기반으로 360 도 영상 전송을 수행하면, 기존 VVC 기반 시스템 대비 대비 평균 24.81%의 bjontegaard delta rate (BD-rate) 감소가 가능함을 확인하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.1-5
• /
• 2020

최근 MPEG-I 그룹에서는 표준화가 진행중인 몰입형 미디어(Immersive Media)에 대한 압축 성능 탐색이 이루어지고 있다. 몰입형 비디오는 다수의 시점 영상과 깊이 맵을 통한 깊이 맵 기반 이미지 렌더링(DIBR)을 바탕으로 제한적 6DoF 을 제공하고자 하는 기술이다. 현재 MIV(Model for Immersive Video) 기술에서는 바탕 시점(Basic View)과 각 시점의 고유한 영상 정보를 패치 단위로 모아둔 추가 시점(Additional View)으로 처리하는 모델을 채택하고 있다. 그 중에서 추가 시점은 일반적인 영상과는 달리 시간적/공간적 상관성이 떨어지는 분절적인 형태로 이루어져 있어 비디오 인코더에 대해 최적화가 되어 있지 않으며, 처리 방법의 특성에 따라 자기 유사적인 형태를 지니게 된다. 따라서 MIV 에서 스크린 콘텐츠 코딩 성능과 함께 화면 내 블록 카피(IBC: intra block copy) 기술에 대한 성능을 분석 결과를 제시한다. IBC 미적용 대비 최대 7.56%의 Y-PSNR BD-rate 감소가 가능함을 확인하였으며, 영상의 특성에 따라 IBC 의 선택 비율을 확인하여 추가 시점의 효율적인 압축 형태를 고찰한다.

• The Journal of Internal Korean Medicine
• /
• v.44 no.5
• /
• pp.855-866
• /
• 2023

The purpose of this study is to report clinical improvement in patients who have received Korean medicine treatment for post-COVID-19 conditions. After COVID-19 infection, two people complaining of symptoms, such as fatigue and indigestion, were treated with Korean medicine, such as acupuncture and herbal medicine. The C19-YRS questionnaire and heart rate variability (HRV) were used to assess the treatment outcomes. After treatment, the patients reported improvements in their symptoms on the YRS questionnaire, with some improvement in the HRV test results. According to the results of this study, Korean medicine can be used to treat post-COVID-19 conditions in clinical practice.

• The Korean Journal of Cytopathology
• /
• v.1 no.1
• /
• pp.43-50
• /
• 1990

The authors report 16 cases of mediastinal fine-needle aspiration cytology from Jan. 1985 to Mar. 1988 at the Seoul National University Hospital. Among them, diagnostic material were obtained in fifteen cases, establishing the diagnosis of 7 thymomas, 2 germinomas, 2 neurogenic tumosr, 1 lymphoma, and 3 meastatic carcinomas. The 9 cytologic diagnoses could be confirmed by histologic examination in 8 patients and by another cytologic method in one patient, allowing concordance rate of 77%.

• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.24-30
• /
• 2013

Red ginseng is a widely used dietary supplement and medicinal herb, and there are so many forms of ginseng products including tea, extract, capsule and jelly. The purpose of the present study was to propose some amendments on ginsenoside content of red ginseng products in Korea. For this purpose, we analyzed red ginseng products for simultaneous determination of 26 ginsenosides by ultra performance liquid chromatography with diode array detector. Some developmental aspects of Korea's ginsenoside content standard regulations for red ginseng products are needed to be examined as follows : Firstly, we proposed that four ginsenosides ($Rb_1$, $Rg_1$, Rf and $Rg_3$) would be detected in red ginseng products. Secondly, in case of red ginseng extracts, the sum of $Rb_1$, $Rg_1$ and $Rg_3$ would be 4.0 mg/g. The two proposals are helpful to comprehensive evaluation of quality of red ginseng products. In conclusion, the scientific studies on amendment scheme of ginsenoside content standard regulation of red ginseng product are very important to fortify quality control.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.12
• /
• pp.858-862
• /
• 2013

The front electrode should be used to make solar cell panel so as to collect electron. The front electrode is used by paste type, printed on the Si-solar cell wafer and sintered at about $800^{\circ}C$. The paste is composed Ag powder and glass frit which make the ohmic contact between Ag electrode and n-type semiconductor layer. From the previous study, the Ag electrodes which used two commercial glass frit of Bi-system were so different on the interface resistance. The main composition of them was Bi-Zn-B-Si-O and few additives added in one of them. In this study, glass frit was made with the ratio of $Bi_2O_3$ and ZnO on the main composition, and then paste using glass frit was prepared respectively. And, also, the paste using the glass frit added oxide additives were prepared. The change of interface resistance was not large with the ratio of $Bi_2O_3$ and ZnO. In the case of G6 glass frit, 78 wt% $Bi_2O_3$ addition, the interface resistance was $190{\Omega}$ and most low. In the glass frit added oxide, the case of Ca increased over 10 times than it of G6 glass frit on the interface resistance. It was thaught that after sintering, Ca added glass frit was not flowed to the interface between Ag electrode and wafer but was in the Ag electrode.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.12
• /
• pp.909-914
• /
• 2013

CIGS is one of thin film solar cell and has been studied so much, because of the possibility of low price and high efficiency. Until now, co-evaporation and sputtering were typical method to prepare CIGS absorption layer, and a few company commercialized solar cell by these method. However, non-vacuum process which has been studied for long time has not been progressed, though the merit of low price. Especially, aerosol deposition method has not been reported, because it is difficult to prepare a large quantity of various CIGS powder. In this study, CIGS powder was synthesized by mechanochemical method and CIGS absorption layer was deposited by aerosol deposition method. The thickness of the CIGS layer was controlled by the number of deposition and the surface roughness of it was affected by the amount of flow gas. And, also, I-V curve of it appeared metallic property in the case of 'as deposition'. After heat treatment in Se-rich atmosphere, the electrical property of it changed to a semiconductor. CdS and transparent conduction layer were formed by a typical method on it for solar cell. The efficiency of cell was appeared 0.19%. Though the efficiency was low because of the disharmony in the after-process, it was conformed that CIGS solar cell could be prepared by aerosol deposition.

• The Research Journal of the Costume Culture
• /
• v.24 no.3
• /
• pp.385-398
• /
• 2016

In a world where opportunities and chances are common, the phenomenon referred to as "generation maybe" describes people in their 20s and early 30s who are usually being indecisive. With the increase in breadth of information and choices, the number of people who are hesitant in deciding whether to purchase increases at a fast pace, as does the number of products and services targeting this group. In order to enhance our understanding of the phenomenon of consumer hesitation, this study explores contextual factors and consumer characteristics that affect consumer hesitation in the purchase decision-making process. Specifically, this study examines whether seven contextual factors, self-determination tendencies, and five decision-making styles influence consumer hesitation in the product decision making process. An online survey was administered to test our research questions. A total of 309 Korean consumers (female=48.9%) aged from 20 to 35 were surveyed. A regression analysis revealed that four contextual factors (product involvement, need for information on alternatives, relative price, and uncertain need), two sub-dimensions of self-determination (perceived competence and relatedness), and two decision-making styles (price seeking and advice seeking) have noticeable influences on consumer hesitation. We also found that the degree of consumer hesitation positively influences consumer post-purchase satisfaction. The study concludes with discussions and practical implications.

• Journal of Korean Society on Water Environment
• /
• v.34 no.1
• /
• pp.84-95
• /
• 2018

The community structure of benthic macroinvertebrates in the fine sediments of freshwater was analyzed according to various sampling tools and methods. The sediment core with the inner diameter of 7.5 cm was more effective in cost and labor in comparison to that of ${\Phi}5cm$ or ${\Phi}10cm$. The number of species increased with the increase in sample size (replicates). When it was collected five times with the ${\Phi}7.5cm$ sediment core, Shannon-Weaver's diversity and McNaughton's dominance of the sample reached about the 80 % level of the community estimates. Most species appeared in the sediment layer of 0-4 cm, and there were no newly recruited species below the depth of 4 cm. Individual abundance of benthic macroinvertebrates decreased exponentially along with the increase in sediment depth. Compared with the individual abundance of the 0-15 cm sediment layer, the abundance was 60 % in the 0-2 cm layer, 25 % in the 2-4 cm layer, 10 % in the 4-6 cm layer and 95 % in the 0-6 cm layer. Compared with organisms collected with the sieve of 0.2 mm pore, the number of species and the individual abundance sifted through the sieve with pore of 1 mm were 36 % and 88 %, and those with pore of 0.5 mm were 5 % and 55 %, respectively.