• 한국추진공학회지
• /
• 제24권6호
• /
• pp.1-9
• /
• 2020

케로신/액체산소를 추진제로 하는 직사각형 2열 오리피스를 갖는 1.5톤급 액체-액체 핀틀 분사기를 설계 및 제작하여 액체로켓엔진의 실운용 조건인 초임계 상태에서 핀틀 분사기의 연소성능 및 연소 안정성 검증 연소시험을 수행하였다. 연소시험결과 연소실 내부의 고혼합비 재순환 영역에서 생성되는 고온의 연소가스에 핀틀 팁이 손상되었다. 핀틀 팁으로 전달되는 열유속 또는 하중에 대한 냉각 성능을 증가시키기 위해 핀틀 분사기 내부에 인서트 노즐을 설치하였다. 연소시험 결과 인서트 노즐의 설치, AR 및 BF가 핀틀 팁 냉각 성능에 큰 영향을 주는 인자로 확인되었다.

• 한국기계가공학회지
• /
• 제20권6호
• /
• pp.10-16
• /
• 2021

Drilling is a crucial process that takes up a significant amount of weight during machining operations. In addition, drill tip-type tools and related operations have been developed for manufacturing industries to achieve economic efficiency. In this study, SM45C carbon steel, widely used for machine structures, was utilized as the working material after quenching and tempering. Insert-tip types of carbide tools, such as TiN and TiAlN, were used as tool materials. Drilling conditions such as the spindle revolution, feed rate, step of cut, and tool diameter were used to measure roughness, roundness, and straightness using the orthogonal array table statistical method. The surface roughness, roundness, and straightness characteristics based on the conditions were analyzed using ANOVA. The results showed that the spindle speed and feed rate were the main factors influencing carbide insert-tip drilling under the same conditions as the experimental conditions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.388-392
• /
• 2003

As the machine tool industry progresses, the performance of cutting tools also needs to be of good quality and specialized. If the existing metal cutting tool tip is coated properly, its life would be longer and the machining of a difficult-to-cut material also could be possible. For the development of the high quality cutting tool, the applicabilities of TiAIN coating deposited by PVD on the cutting insert were experimentally investigated. The various measurements, such as, SEM micrograph, XRD pattern, AFM surface morphology, and hardness were performed to cross-check the possibility and availability of TiAIN coated tool in the field. The effects of it is successful and we hope to see good results in many fields.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2430-2435
• /
• 2015

상품을 제조할 때 유연성을 높이기 위해서는 칩의 형상분석이 중요한 문제 중의 하나이다. 본 연구에서는 선삭 작업에서 가공 여유각 변경에 따른 피삭재의 가공특성이 어떻게 변화되는지 분석하고 자 하였다. 피삭재는 3가지로 SM45C(기계구조용탄소강), SCM415(크롬몰리브덴강), STS303(스테인리스강)을 선택하여 정해진 가공조건인 회전속도, 이송속도와 가공 깊이에 따라 분석하였다. 특히, 선삭가공에서의 칩의 형상과 인서트 팁의 마모현상을 분석하였다. 결과적으로 칩의 형상은 피삭재의 재질과 가공깊이, 이송속도에 따라 변화됨을 알 수 있었다. 가공이송속도가 0.10mm/rev일 때와 가공깊이 0.3mm일 때가 유동형 칩으로 재질이나 가공특색을 분류하지 않고 가장 좋은 형상을 보였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.399-406
• /
• 2001

This study describes the geometric characteristic and the 5-axis machining method of end mill body with insert tip. The geometry of end mill body is consisted of the flute part and the insert tip part. Thus, this study defines the flute part as ruled surface with constant helix angle and the insert tip part as rectangular plane on general direction. The geometric algorithm and the 5-axis NC part program were calculated by our programmed software and a sampled end mill body was machined on 5-axis machining center equipped with two index tables. The machined end mill body with insert tip was very agreeable to the designed end mill body with insert tip. Thus, the method proposed in this study may be very useful for the machining of end mill body with insert tip.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.1-9
• /
• 2002

This study describes the geometric characteristics and the 5-axis machining method in order to make end mill cutter coming with insert tips. End mill geometry is consisted of flute part and insert tip part. Flute part modeled by using ruled surfaces with constant helix angle, and insert tip part modeled by rectangular planes containing tapped hole of specified direction in its center. In this study, the modeled insert tip part considered both of a radial rake angle and a axial rake angle, because they were important cutting conditions. In order to machining the virtual end mill defined from geometric characteristics, we programmed a special software to machining the end mill considered in this study. This software can generate NC-codes about following processes, end milling or ball end milling of flute part end milling of rectangular plane, centering of hole, drilling of hole, and tapping of hole. Ant sampled end mills were modeled and machined on 5-axis CNC machining center with two index tables. Since machined end mills were very agreeable to designed end mills, we saw that the method proposed in this study can be very useful for manufacturing of end mill body with insert tip.