• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.331-339
• /
• 2001

인산석고(phosphogypsum)는 비료생산과정에서 발생되는 산업부산물로, 주요구성성분은 이수석고(CaSO$_4$.2$H_2O$)의 성분이 대부분이고 여기에 인(P$_2$O$_2$), 철(F)와 유기물질 등으로 이루어져 있다. 전 세계적으로 인산석고 발생량은 현재 1억8천만톤이고 향후 약 3억8천만톤 발생될 것으로 추정되며, 국내에는 약 157만톤이 발생되고 있다. 본 연구는 성토재료로 인산석고를 활용할 경우 이에 대한 물리적 환경적 특성을 분석하였다. 이를 위하여 인산석고와 화강토 혼합비율에 따른 입도분석, 비중시험, 다짐시험, CBR시험, pH시험 및 용출시험 등 일련의 실험을 실시하였다. 실험결과, 인산석고 혼합재료를 성토재료로 활용할 경우 환경적으로 유해한 영향이 적으며, 산업부산물의 자원화 차원에서 대체 성토재료로 활용이 가능한 것으로 나타났다.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.4
• /
• pp.53-59
• /
• 2003

Phosphogypsum is a by-product resulting from the phosphoric acid process for manufacturing fertilizers. It consists mainly of $CaSO_4{\cdot}2H_2O$ and contains some impurities such as $P_2O_5$, $F^-$, and organic substances. Recycling research of phosphogypsum is very limited to a field of study, especially, civil engineering. This study describes an application of phosphogypsum as dredged materials. For this purpose, experiments are performed to evaluate the physicochemical properties and environmental characteristics of dredged clay with phosphogypsum ; sedimentation test, pH, and leaching test. The result of this study are as follows : the settling velocity is increased due to the activity of phosphogypsum. And leaching and radioactive test results are far below than those of regulatory requirement of Waste Management Act in Korea. Therefore phosphogypsum can be used as dredged materials in reclamation.

• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.128-129
• /
• 2011

• Journal of the Korea Concrete Institute
• /
• v.21 no.6
• /
• pp.729-735
• /
• 2009

In this study, it is experimentally verified a feasibility of the wasted phosphogypsum ($CaSO_4/H_2O$) that is a byproduct from the phosphoric acid process of manufacturing fertilizers can be applied as an admixture in slag cement. For the test, phosphogypsum is modified as dihydrate, hemihydrate, type III anhydrite, and type II anhydrite, and then chemical characteristics and mechanical properties of various slag cements containing above mentioned gypsum materials were analyzed. The test results show that the gypsum made at high temperature has better quality with decrease of water-soluble phosphoric acid ($S-P_2O_5$) which has an effect on the quality of cement. And type II anhydrite shows superior quality in terms of drying shrinkage and the compressive strength of cement paste with hemihydrate at 56 days is higher than other gypsum material.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.822-829
• /
• 1997

When $Al_2(SO_4)_3$ as an accelerator was added to $\beta$-hemihydrate gypsum, the setting time, mobility and compressive strength properties of $\beta$-hemihydrate gypsum were examined with the adding of two types grounded gypsum crushed by ball mill. By 15wt% adding of 7% $Al_2(SO_4)_3$ dilute solution, the setting time of $\beta$-hemihydrate gypsum was sharply accelerated than that of non-added $\beta$-hemihydrate gypsum. When ground phospho gypsum(PG) and chemical gypsum(CG) were added to $\beta$-hemihydrate gypsum, the initial and final setting time of $\beta$-hemihydrate gypsum were accelerated markedly with the increasing of grinding time and added amount of ground phospho gypsum. Especially, this trend largely presented when ground phospho gypsum was added to $\beta$-hemihydrate gypsum. The compressive strength of $\beta$-hemihydrate gypsum added by ground phospho and chemical gypsum was largely increased at initial curing time such as 1, 3 days. Particularly, the compressive strength of $\beta$-hemihydrate gypsum added by ground phospho gypsum was increased by 15~20% than that of ground chemical gypsum.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.1
• /
• pp.133-140
• /
• 2002

Phosphogypsum is a by-product from the phosphoric acid process for manufacturing fertilizers. It consists mainly of $(CaSO_4.2H_2O)$ and contains some impurities such as$(P_2O_5)$, 불소$(F_-)$, and organic substances. The annual world production of this material is up to 150 million tons and is up to 1.57 million tons in Korea. Therefore studies describe application of phosphogypsum to daily and middle cover materials in landfill. For this Purpose, experiments were performed to evaluate the engineering properties of the material by sieve analysis, specific gravity, consistency of soil, compaction, CBR, permeability, mi environmental characteristics of leaching test, reactor test. The results of this study are as follows : The mixing and layer conditions of CBR value are 6.2~6.3%, coefficient of permeability is $\alpha$$\times10_{-5}~10_{-6}cm/sec$. And leaching test results are far below than those of regulatory requirement of Waste Management Act, Soil Environment Preservation Act in Korea and RCRA in USA. Therefore phosphogypsum can be used as daily and intermediate cover materials in landfill.

• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.58-68
• /
• 2006

This study is carried out for the purpose of investigating the property of phosphogypsum, and suggesting the proper recycling system for it. The chemical composition, mineralogical composition, particle size distribution and shape of phosphogypsum were investigated. The size distribution and constitution of impurities, distribution of heavy metals are also investigated. In conclusion, the grade and yield of recoverable phosphogypsum were discussed.

• Journal of Radiation Protection and Research
• /
• v.36 no.4
• /
• pp.223-229
• /
• 2011

Ba is the most useful element to get the $Ba(Ra)SO_4$ precipitate. However, when the high concentrations of ions such as sulfate, calcium are existed in the leachate of phosphogypsum stack, it is difficult to get the $Ba(Ra)SO_4$ precipitate. Since this reason, the developed method for the Ba coprecipitate using EDTA was performed to determine the $^{226}Ra$ concentration in the high sulfate sample. The average concentration of $^{226}Ra$ in a leachate of phosphogypsum using this method was 0.102 $Bq{\cdot}kg^{-1}$ and the minimal detectable activity is 3.4 $mBq{\cdot}kg^{-1}$. The $mBq{\cdot}kg^{-1}$ method was 0.102 $Bq{\cdot}kg^{-1}$ and the minimal detectable activity is 3.4 $mBq{\cdot}kg^{-1}$. The $^{226}Ra$ stock solution and the CRM (Certified Reference Material) were analyzed to verify this method. In analyzed $^{226}Ra$ stock solution, bias with added concentration was approximately 1% and the correlation curve between $^{226}Ra$ concentration in simulated standard sample and measured $^{226}Ra$ concentration showed good agreement with a correlation coefficient ($R^2$) of 0.99. In analyzed CRM, maximum bias with reference value was 5.8% (k=1) and the analytical results were in good agreement with the reference value.

• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.46-57
• /
• 2006

This study was carried out for the purpose of recovering the refined gypsum from waste phosphogypsum. The refined gypsum was recovered as a under product of 325 mesh wet screening followed by dehydration and hydration stage. The influence of dehydration temperature and time, dehydration rate, aging time, slurry density of hydration and sonication time on the yield and grade of gypsum were investigated. The refined gypsum of $94{\sim}96%$ grade is recovered in 95% yield by wet screening after selective dehydration and hydration process, from the phosphogypsum. For the better separation efficiency of gypsum, it is recommended to treat the phosphogypsum at the conditions of as follows; 6hr's dehydration at $140^{\circ}C$, hydration slury density of $3{\sim}10%$, hydration temperature of $20{\sim}30^{\circ}C$, hydration time of 2hr. In additions, addition of sodium citrate 0.005M and sonication of $5{\sim}10min.$ are effective for increase the recovery of gypsum. On the other hand, aging the dehydrated gypsum 16 hours or longer make decrease the recovery of gypsum remarkably.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.3
• /
• pp.144-151
• /
• 2010

In this study, it is investigated the mechanical chemical properties of cement matrix using phosphogypsum and kaolin as a admixture for the substitutive materials to silica fume which is so expensive. For the test, phosphogypsum is modified as dihydrate, hemihydrate, type III anhydrite, and type II anhydrite, respectively and furnaced kaolin at $900^{\circ}C$ was also manufactured into meta kaolin by air cooling and water cooling method. The chemical characteristic and mechanical properties of various type of blended cements contained above mentioned gypsum and meta kaolin materials analyzed and compared with those characteristics of cement matrix with silica fume. From the test, the cement mixed meta kaolin made in water cooling has more excellent quality than other material.