• FLOWER RESEARCH JOURNAL
• /
• v.16 no.2
• /
• pp.112-117
• /
• 2008

Plug seedlings of vinca (Catharanthus roseus L. 'Pacifica Punch') and salvia (Salvia splendens F. Sellow ex Roem & Schult 'Maestro') were transplanted into square plastic pots (145 mL volume) filled with a soilless growing medium. To determine the effect of application rate on the growing medium EC and growth of plants, 0, 0.5, 1.0, 1.5, 2.0 and 4.0 g per pot of a controlled release fertilizer (14-14-14 Osmocote, 14N-6.2P-11.6K) were mixed with the growing medium. Plants were subirrigated daily with tap water. In both vinca and salvia, growing medium EC increased as application rate was elevated. Growing medium EC was relatively constant over a whole crop period when the application rate was less than 1.5 g per pot, while it decreased throughout the experiment at higher application rates such as 2.0 to 4.0g per pot in both species. The greatest leaf area, plant height, and shoot dry weight of vinca were obtained when plants were fertilized with 2.0 to 4.0 g per pot of the fertilizer, resulting in a growing medium EC of $1.0{\sim}1.7dS{\cdot}m^{-1}$ throughout the experiment. Leaf area, shoot dry weight, and chlorophyll content of salvia increased with elevated application rates. Leaf area, shoot dry weight, and chlorophyll content of salvia were the greatest when plants were fertilized with 4.0 g per pot, resulting in growing medium EC of $1.0{\sim}4.0dS{\cdot}m^{-1}$ throughout the experiment. Plant height of salvia was the greatest when plants were fertilized with 2.0 to 4.0g per pot. Concentrations of nitrogen (N), phosphorus (P), potassium (K), magnesium (Mg), and sulfur (S) in the shoots of vinca increased, while concentration of calcium (Ca) decreased with elevated application rates. Concentrations of boron (B) and manganese (Mn) in the shoots of vinca increased as the application rate decreased.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.3
• /
• pp.201-209
• /
• 2021

There is a growing interest in rice cultivation on farms with irrigation facilities in desert climates. We investigated the growth characteristics and yields of two rice cultivars (FL478 and Asemi) irrigated at field capacities (FCs) of 80%, 100%, and 120% in a lysimeter with coarse sandy soils. The results showed that at the heading stage, the FC 100% treatment had the highest plant height and number of tillers between the two cultivars. At the harvest period, the culm and panicle lengths of both cultivars at FC 100% were similar to those of the control. In contrast, the number of panicles, grain number per panicle, and percentage of ripened grains were the highest in the control. Moreover, FL478 and Asemi had the highest grain yields of 1.40 and 2.20 kg·pot^-1 in the control, respectively. For both cultivars, the grain yields of the FC 100% and FC 120% treatments were approximately 70% of the control. In comparison, FL478 and Asemi had the highest water productivity of 0.45 and 0.63 kg·m^3-1 for the FC 80% treatment, followed by the FC 100% treatment (0.42 and 0.59 kg·m^3-1, respectively), which was nearly 14.3% and 20.3% higher than that of the control. Therefore, we found that irrigation at FC 100% is anticipated to be effective in managing surface drip irrigation for rice cultivation in desert climates in arid environments, while maintaining rice yields.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.611-615
• /
• 2011

'Manjong' is a new japonica rice cultivar developed in 2009 derived from a cross between 'Yeongdeog34' and 'Nampyeongbyeo' at the Department of Functional Crop, NICS, RDA. This cultivar is suitable for the double cropping system after the cash crop cultivation. Heading date of 'Manjong' is later than 'Keumobyeo' under the late transplanting cultivation on July 10. It has high grain fertility under cold conditions and low premature heading. One of the distinguishing characteristics of this variety is its resistance to major diseases like leaf blast and rice stripe virus disease. However, it shows susceptibility to major insect pests and bacterial blight disease. Milled rice kernels are translucent with non-glutinous endosperm and have 7.2% protein and 18.7% amylose contents. Ripening ratio and head rice ratio is very higher than those of 'Keumobyeo'. The palatability of cooked rice is also better than 'Keumobyeo'. The milled rice yield of 'Manjong' in local adaptability tests after harvest of the cash crop is $4.81MT\;ha^{-1}$. This cultivar is suitable for planting in the plain paddy fields of Honam and Yeonnam regions in Korea.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.576-580
• /
• 2011

'Keunseom', a new second generation Tongil-type rice variety (Oryza sativa L.), is a mid-maturing ecotype developed by the rice breeding team of Department of Functional Crop, NICS, RDA in 2006. This variety was originated from a cross between 'Dasanbyeo' and 'Namyeongbyeo' in 1996's summer season, which developed by pedigree breeding method. The pedigree of 'Keunseom' was YR18234-B-B-98-3-5-1, and it was designated 'Milyang202' in 2002. 'Keunseom' has tolerance to lodging, because it has short culm length as 77 cm. This variety is resistance to bacterial blight K1 race, rice stripe virus, rice dwarf virus, and leaf blast disease. Milled rice kernel of 'Keunseom' is a clean translucent with non-glutinous endosperm, and has good quality as it was clear in chalkness. The milled rice yield potential of 'Keunseom' was about 719 kg/10a at ordinary fertilizer level of local adaptability test. This cultivar would be adaptable to the mid and southern plain of Republic of Korea.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.153-158
• /
• 2008

"Baegjoong", a white winter wheat (Triticum aestivum L.) cultivar was developed by the National Institute of Crop Science, RDA. It was derived from the cross "Keumkang"/"Olgeuru" during 1996. "Baegjoong" was evaluated as "Iksan307" in Advanced Yield Trial Test in 2004. It was tested in the regional yield trial test between 2005 and 2007. "Baegjoong" is an awned, semi-dwarf and soft white winter wheat, similar to "Keumkang" (check cultivar). The heading and maturing date of "Baegjoong" were similar to "Keumkang". Culm and spike length of "Baegjoong" were 77 cm and 7.5 cm, similar to "Keumkang". "Baegjoong" had lower test weight (802 g) and lower 1,000-grain weight (39.8 g) than "Keumkang" (811 g and 44.0 g, respectively). It had resistance to winter hardiness, wet-soil tolerance and lodging tolerance. "Baegjoong" showed moderate to pre-harvest sprouting (23.9%) although "Keumkang" is susceptible to pre-harvest sprouting (38.9%). "Baegjoong" had similar flour yield (72.4%) and ash content (0.41%) to "Keumkang" (72.0% and 0.41%, respectively) and similar flour color to "Keumkang". It showed lower protein content (8.8%) and SDS-sedimentation volume (35.3 ml) and shorter mixograph mixing time (3.8 min) than "Keumkang" (11.0%, 59.7 ml and 4.5 min, respectively). Amylose content and pasting properties of "Baegjoong" were similar to "Keumkang". "Baegjoong" had softer and more elastic texture of cooked noodles than "Keumkang". Average yield of "Baegjoong" in the regional adaptation yield trial was $5.88\;MT\;ha^{-1}$ in upland and 5.35 MT ha-1 in paddy field, which was 13% and 17% higher than those of "Keumkang" ($5.21\;MT\;ha^{-1}$ and $4.58\;MT\;ha^{-1}$, respectively). "Baegjoong" would be suitable for the area above the daily minimum temperature of $-10^{\circ}C$ in January in Korean peninsula.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.721-726
• /
• 2010

'Nampung', a new soybean cultivar for soy-paste, was developed from the cross between Suwon190 and 'Pokwangkong' by soybean breeding team at the National Institute of Crop Science (NICS) in 2007. A promising line, SS97215-S-S-20, was selected and designated as the name of Milyang162. It was prominent and had good result from regional adaptation yield trials(RYT) for three years from 2005 to 2007 and was released as the name of 'Nampung'. It has a determinate growth habit, white flower, brown pubescence, yellow seed coat, light brown hilum, medium spherical seed (19.9 grams per 100 seeds). 'Nampung' is resistant to soybean mosaic virus and bacterial pustule, the major soybean disease in Korea. It is possible to harvest of 'Nampung' using combine because of it's lodging tolerance, few branches, and high position of pod attachment. The average yield of 'Nampung' is 2.97 ton per hectare in the regional yield trials (RYT) carried out for three years from 2005 to 2007 which is 21 percent higher than the check variety, 'Taekwang'.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.260-279
• /
• 2010

The analysis on bibliography and field investigation of Callipogon relictus Semenov, 1898 (Korean natural monument number 218) shows that the size varies from country to country, and Korean specimens, for which male is 85~120mm and female is 65~85mm, are found to be the largest. The average diameter and length of egg are 2.60mm and 6.72mm respectively. The larva has milky color and is about 100~150mm in length. The pupa is nearly 70~110mm. An adult generally appears from June to September in Korea in the broadleaf forest of lowland, whereas it appears from June to July in China. It is known that the pupa largely feed on the old tree trunk of Carpinus laxiflora (Siebold & Zucc.) blume in Korea, but no such data have been reported in China and Russia, showing differences in host plants. While the larva period is not exactly known in Korea, it is reported to be two years in China. It appears that the species inhabits in very limited regions of approximately between geographical latitude $37.5^{\circ}{\sim}47.8^{\circ}$ and longitude $126^{\circ}{\sim}140^{\circ}$ including Korea, China and Russia. To conserve the long-horned beetle in Korea, this research drew out following some conclusions through analyzing the references and field survey data. First, it need to perform precise survey on the natural environment of occurring and collected area or place including host plant kinds, temperate, humidity, latitude, longitude etc. Second, habitat region must be designated as a restricted development area, and it need to exclude or reduce the damage factors to prosper reproduction of the species. Third, it is necessary to keep loosing cautiously artificial breeding individuals in the reported sites, not disturbing scope of natural populations. Fourth, it needs to educate or publicize many people importance and value of this species through many methods.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.351-373
• /
• 2019

The cold eddies around the Ulleung Basin in the East Sea were identified from satellite altimeter sea level data using the Winding-Angle method from 1993 to 2015. Among the cold eddies, the Dokdo Cold Eddies (DCEs), which were formed at the first meandering trough of the East Korea Warm Current (EKWC) and were pinched off to the southwest from the eastward flow, were classified and their migration patterns were analyzed. The vertical structures of water temperature, salinity, and flow velocity near the DCE center were also examined using numerical simulation and observation data provided by the Hybrid Coordinate Ocean Model and the National Institute of Fisheries Science, respectively. A total of 112 DCEs were generated for 23 years. Of these, 39 DCEs migrated westward and arrived off the east coast of Korea. The average travel distance was 250.9 km, the average lifespan was 93 days, and the average travel speed was 3.5 cm/s. The other 73 DCEs had moved to the east or had hovered around the generated location until they disappeared. At 50-100 m depth under the DCE, water temperature and salinity (T < $5^{\circ}C$, S < 34.1) were lower than those of ambient water and isotherms made a dome shape. Current faster than 10 cm/s circulates counterclockwise from the surface to 300 m depth at 38 km away from the center of DCE. After the EKWC separates from the coast, it flows eastward and starts to meander near Ulleungdo. The first trough of the meander in the east of Ulleungdo is pushed deep into the southwest and forms a cold eddy (DCE), which is shed from the meander in the south of Ulleungdo. While a DCE moves westward, it circumvents the Ulleung Warm Eddy (UWE) clockwise and follows U shape path toward the east coast of Korea. When the DCE arrives near the coast, the EKWC separates from the coast at the south of DCE and circumvents the DCE. As the DCE near the coast weakens and extinguishes about 30 days later after the arrival, the EKWC flows northward along the coast recovering its original path. The DCE steadily transports heat and salt from the north to the south, which helps to form a cold water region in the southwest of the Ulleung Basin and brings positive vorticity to change the separation latitude and path of the EKWC. Some of the DCEs moving to the west were merged into a coastal cold eddy to form a wide cold water region in the west of Ulleung Basin and to create a elongated anticlockwise circulation, which separated the UWE in the north from the EKWC in the south.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.587-601
• /
• 2020

The ocean circulation was simulated in the East Sea and Ulleungdo-Dokdo region using ROMS (Regional Ocean Modeling System) model. By adopting the East Sea 3 km model and the HYCOM 9 km data, Ulleungdo 1 km model and Ulleungdo-Dokdo 300 m model were constructed with one-way grid nesting method. During the model development, a correction method was proposed for the distortion of the open boundary data which may be caused by the bathymetry data difference between the mother and child models and the interpolation/extrapolation method. Using this model, a super-high resolution ocean circulation with a horizontal resolution of 300 m near the Ulleungdo and Dokdo region was simulated for year 2018. In spite of applying the same conditions except for the initial and boundary data, the numerical models result indicated significantly different characteristics in the study area. Therefore, these results were compared and verified by using the surface current data estimated by satellites altimeter data and temperature data from NIFS (National Institute of Fisheries Science). They suggest that in general, the improvement of the one-way grid nesting with the HYCOM data on RMSE, Mean Bias, Pattern correlation and Vector correlation is greater in 300 m model than in the 1 km model. However, the nesting results of using East Sea 3 km model showed that simulations of the 1 km model were better than 300 m model. The models better resolved distinct ridge/trough structures of isotherms in the vertical sections of water temperature when using the higher horizontal resolution. Furthermore, Karman vortex street was simulated in Ulleungdo-Dokdo 300 m model due to the terrain effect of th islands that was not shown in the Ulleungdo 1 km model.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.spc
• /
• pp.30-36
• /
• 2022

A sensor is needed to continuously and automatically measure the change in HNS concentration in industrial facilities that directly discharge to the sea after water treatment. The basic function of the sensor is to be able to detect ppb levels even at room temperature. Therefore, a method for increasing the sensitivity of the existing sensor is proposed. First, a method for increasing the conductivity of a film using a conductive carbon-based additive in a nanoparticle thin film and a method for increasing ion adsorption on the surface using a catalyst metal were studied.. To improve conductivity, carbon black was selected as an additive in the film using ITO nanoparticles, and the performance change of the sensor according to the content of the additive was observed. As a result, the change in resistance and response time due to the increase in conductivity at a CB content of 5 wt% could be observed, and notably, the lower limit of detection was lowered to about 250 ppb in an experiment with organic solvents. In addition, to increase the degree of ion adsorption in the liquid, an experiment was conducted using a sample in which a surface catalyst layer was formed by sputtering Au. Notably, the response of the sensor increased by more than 20% and the average lower limit of detection was lowered to 61 ppm. This result confirmed that the chemical resistance sensor using metal oxide nanoparticles could detect HNS of several tens of ppb even at room temperature.