• Current Research on Agriculture and Life Sciences
• /
• v.31 no.3
• /
• pp.193-199
• /
• 2013

This study dyed rayon fabric using loess as a natural colorant. To obtain the optimal dyeing conditions, various dyeing conditions were examined (temperature, pH, time, and concentration). The color fastness was evaluated using standard washing and rubbing fastness tests. The results were as follows: The loess powder particle size ranged from 0.4 to $1.7{\mu}m$ with a distribution range of 1.1 to $1.4{\mu}m$, representing a fine and uniform manufactured loess powder. The loess component analysis showed a large amount of silicon dioxide and aluminum oxide. TheFT-IR spectra showed that the ammonium group in the rayon fabric produced N-H banding at $1,540cm^{-1}$. The highest K/S value for the rayon fabric was obtained when the pH was 8.0, and this value increased rapidly with a longer dyeing time and when increasing the loess concentration to 30% (w/v). Pre-treatment with a soybean solution produced the highest K/S value for the rayon fabric with a loess concentration of 30% (w/v). The SEM analysis showed a higher amount of loess adhered to the rayon fabric surface when increasing the loess concentration. However, pre-treatment with a cationic agent and soybean solution resulted in a much higher attachment of loess to the fabric surface. Thus, the experimental results showed that using a cationized fabric and pre-treatment with a soybean solution are more effective when dyeing rayon fabric with loess than when using only loess.

• Proceedings of the Korean Fiber Society Conference
• /
• 1991.06b
• /
• pp.86-86
• /
• 1991

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1998.05a
• /
• pp.122-127
• /
• 1998

(1) 급액천의 규격별 양액공급량 $\bigcirc$ 합섬(비스코스＋레이온) : 시간당 소(12.6ml), 중(21.2ml), 대(57.5ml)의 순으로 유입되었으며 중과 대의 급액천의 유입은 거의 같아 급액천의 규격간에 공급량은 비례하지 않았다. $\bigcirc$ 합섬(폴리에스텔) : 소(4.3ml), 중(20ml), 대(57.5ml)순으로 양액이 유출되었으며, $\bigcirc$ 합섬(인견) : 소(2.9ml), 중(23.7ml), 대(32.3ml)순으로 유입되었으나 소(급액천)의 유출량은 적어 급액천 재질로서 부적합하다고 생각되었으며, $\bigcirc$ 실(cotton) : 소(0.2ml), 중(3.0ml), 대(2.7ml)순으로 규격간에 유입은 차이가 없었으며 전체적으로 유출이 적어 급액천으로서는 부적합하였다. (2) 배지의 규격(종류)별 양액의 유입량 $\bigcirc$ 송이(Ф6.0mm~12.0mm이상) : 배지의 입자가 굵은 배지일수록 급액초기 1~2시간이 유입이 급격히 증가하였으나 시간이 경과할수록 일정한 량을 보였으며 유입량은 다른 배지에 비하여 많았고 급액천의 규격이 클수록 유입되는 량이 많았으나 시간이 경과함에 따라 감소하는 경향을 보였다. $\bigcirc$ 송이(Ф1~5mm) : 합섬A(비스코스+레이온)과 합섬B(폴리에스텔)에서는 시간당 15.0~50.1ml가 유입되었으나 합섬C(인견)과 실에서는 시간당 10ml이하로 토출량이 적었다. $\bigcirc$ 송이(Ф1~12mm) : 합섬A와 합섬B 급액천에서는 17.0~53.8ml가 유입되었으나 합섬C와 실에서는 시간당 평균 4.0~21.2ml가 흘러나와 배지의 공극이 일정하지 않아 시간당 통과하는 양이 일정하지 않았다고 생각되었다. $\bigcirc$ 펄라이트 : 합섬A(비스코스+레이온)급액천의 유입은 소(1$\times$60cm)에서 21.8ml, 중(2$\times$60cm) 33.5ml, 대(3$\times$60cm) 43.4ml가 통과되었고 합섬(폴리에스텔)에서는 19.0~30.7ml로서 급액천의 규격에 따라 통과되는 차이가 있었다. 배지가 규격화되어 있어 급액천의 규격별로 일정하게 유입되었으며 급액천의 재질이 유입에 영향을 미친 것으로 사료되었다. (2) 급액관과 베드상과의 높이에 따른 유출양 : 급액과 베드상과의 낙차가 클수록 유출이 증가함을 알수 있었으나 합섬C(인견)실험구에서는 낙차가 유출에 영향을 미치지 않았다. (4) 급액된 양액의 EC 및 pH조사 : 급액된 양액의 EC 및 pH에 전혀 변화가 없어 재배 적응에 문제가 없을것으로 사료되었다.

• Journal of the KSME
• /
• v.24 no.3
• /
• pp.180-187
• /
• 1984

최근에 제품설계, 제조 및 생산관리등의 분야에 컴퓨터의 이용이 급속히 보급되고 있다. 본고에서는 다품종 소량생산에 대한 자동화를 의미하는 새로운 기술용어인 프랙시블 오토메이션(flexible automation)의 개념을 소개하고, 이 개념을 기본해석으로 해서 공장자동화(factory automation, FA)의 방법과 이의 사무자동화(office automation, OA)에 대한 관계를 고찰하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.139-140
• /
• 2008

Young Ju City Hall, Kyung Sang Buk Do, and KTDI is supporting the textile goods' planning and marketing for viscose rayon which is best goods in Punggi area to revitalize the economy of Punggi and to enhance the value of Punggi's viscose rayon.

• Journal of Korean Institute of Industrial Engineers
• /
• v.18 no.1
• /
• pp.169-176
• /
• 1992

In parts assignment problem for FMS, both the parts and the tools required to process the parts are assigned to the machine tools for a specified planning period. This is an important decision-making problem for a short-term production planning of FMS. In this paper, parts assignment problem for FMS was analyzed to determine the optimal plan which has the adaptability to production fluctuation. A mathematical model was developed for determing the parts and the tools required for the machine tools which compose FMS, and the model was analyzed to obtain optimal solution. In addition, the vality and feasibility of the computational algorithm was examined by solving a numerical example.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.101-101
• /
• 2011

재생 셀룰로스 섬유의 원료로 사용되는 셀룰로스는 면, 마, 목재 등 고등식물의 주성분으로 매년 수십억톤이 광합성에 의하여 생산되어지고 있다. 따라서 석유류와 같은 화석연료의 가격 변동에 영향을 받지 않고 안정적으로 수입되고 있다. 또한, 셀룰로스에는 면이나 마류 등과 같이 간단한 정제 처리에 의해 의류용 섬유로서 사용될 수 있는 것과 목재 섬유와 같이 펄프화하여 종이, 인견섬유, 필름 등으로 사용되어지는 것이 있으며, 셀룰로스 유도체도 제조할 수 있다. 현재까지 개발된 섬유들 중 대표적인 셀룰로스계 재생섬유인 비스코스 레이온(Viscose rayon)은 그 제조 방법이 환경적으로 치명적인 문제를 안고 있으나 고유의 우수한 드레이프성, 흡습성, 독특한 광택, 시원한 촉감 등을 가지고 있어 그 소비는 꾸준한 상황이다. 이러한 Viscose rayon을 대체하기 위하여 친환경적인 공법을 이용하여 개발된 Lyocell 제품이 각광을 받고 있다. 면 셀룰로스 재생섬유는 기존의 Lyocell섬유에 비해 신도는 높고 모듈러스가 낮아 Modal과 같은 촉감을 가지고, 피브릴 발생이 없어 방사공정에서 가교반응이 필요치 않는 것으로 기대된다. 친환경 공법인 Lyocell 공법으로 개발된 면 린터 원료를 이용하여 면 린터 셀룰로스 재생섬유 제조기술을 개발하고자 한다. 따라서 본 연구에서는 면 린터 셀룰로스 재생섬유의 기술적인 신뢰성을 검증하기 위해 면 린터 셀룰로스 재생섬유소재 피브릴화 정도의 표준화 시험법을 연구하고자 한다. 사용원단으로 Tencel A-100, Tencel standard, Modal, Lyocell LF, 면 린터 섬유를 사용하였으며, 세탁, 염색, 알칼리조건 처리에 따른 물성 변화를 알아보았다. 물성 변화는 전자현미경으로 측정하였다.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.154-163
• /
• 2015

Because of acute or chronic intoxication by carbon disulfide, viscose rayon industry is strictly subjected to environment regulatory approval. Recently, non-wood fibers are frequently considered as a raw materials for the manufacture of specialty paper for the higher physical strength and functionality. Among the non-wood fibers, hemp bast fiber is one of the most widely used materials in viscose rayon yarn industries. In this study, the handsheet for manufacturing the viscose rayon yarn was prepared with wood pulp fibers and hemp bast fibers. The proper mixing ratio of wood fibers and hemp bast fibers with dry-strength agent and nano-celluloses was analysed in terms of physical and mechanical strength of sheet for viscose rayon yarn. The papermaking conditions for high mechanical strength of sheet were obtained by mixing the SwBKP and HwBKP fibers with freeness level of 200 mL CSF. The dual polymer system by controlling the addition ratio of PVAm and anionic PAM was also important. The addition of nano-cellulose into wet-end furnishes increased the physical strength of sheet, and improved the paper structure for the production of viscose rayon yarn.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.6
• /
• pp.891-909
• /
• 2019

This study uses a documentary survey, field survey and textile's characteristics to understand the history of the Punggi Viscose Rayon. Punggi's textile industry grew as people migrated from Pyeongan Province in the 1900s. Little is known regarding early production conditions, but documents show cottage industries in the 1940s made union cloth using silk and rayon. The Punggi weaving industry peaked after the Korean War and declined in the late 1950s. Punggi rayon at that time was mainly used for lingerie or lining, with miliary or polka dot patterns. The industry regained momentum when the power loom was introduced in the 1960s. Manufacturers also started weaving union cloth with synthetic fibers and rayon. In the 1990s, jacquard looms enabled the weaving of elaborately colored and patterned textiles for outer fabric that made Punggi rayon famous. Most Punggi rayon looms have developed in the order of manual handlooms, semiautomatic looms, Jokdapgi, to power looms. Looms equipped with dobbies or jacquard devices also changed from wooden dobby looms to wooden jacquard looms and then to iron jacquard looms. Punggi Rayon currently has its own trademark and tag, but lacks specific regulations on the blending of fibers.

• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.326-332
• /
• 2014

To develop cool touch feeling fabrics for summer clothing material, it was manufactured several compositions of woven fabrics, having rayon multi-filament yarn (non-twisted) as warp and various kinds of yarn, such as viscose rayon multi-filament yarn (twisted), tencel$^{(R)}$ spun yarn, PET high absorbance quick dry filament yarn, and PET based rayon-like yarn, as weft. After preparing the fabrics, basic properties of the fabrics were investigated, such as air-permeability, tensile strength, absorption rate, drying rate, etc. Also, surface warm / cool sensations of the woven fabrics were assessed by Qmax Warm / Cool Touch Tester. It was observed that the fabrics composed of viscose rayon multi-filament yarn (warp) and PET high absorbance quick dry filament yarn (weft) showed excellent surface cool touch sensation-the highest Qmax value. This is because the fabric having flat shaped PET high absorbance quick dry filament shows the largest contact area with Qmax measuring plate. And, the fabric also showed superior high absorbance and quick dry property as expected. In addition, we treated phase change material (PCM) on the surface of the fabric composed of viscose rayon multi-filament yarn (warp) and PET high absorbance quick dry filament yarn(weft) to improve the cool touch feeling. However, the surface cool touch feeling was impaired by resin treated with PCM during the finishing process.