• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.657-665
• /
• 2012

The development projects distort the natural water circulation system and increase the non-point source pollution by changing the natural cover type. The low impact development (LID) techniques are considering as new development approach to decrease the ecological- and hydrological impacts from high imperviousness rate. The high imperviousness rate is because of the construction of building, parking lot and road for human activities. Knowing the basic characteristics of rood runoff can give the direction for setting up the water management strategy. The monitoring results show the pollutant EMCs of roof runoff are 3~13 times lower than EMCs of the road and parking lot. The pollutant sources from roof runoff are mainly from leafs, cigarette butts, atmospheric deposition and materials of the roof. The EMC is occurred around 15minutes later after starting runoff and more than 8 storm events are needed to have the average EMCs.

• Clinical and Experimental Pediatrics
• /
• v.50 no.3
• /
• pp.306-310
• /
• 2007

Restrictive dermopathy is a rare autosomal recessive disorder in which rigidity or tautness of the skin from the second trimester causes a fetal akinesia deformation sequence (FADS) and early death. Characteristic features include taut skin with prominent subcutaneous vessels, widely open fontanelles and cranial sutures, distinctive facies, flexion contractures, pulmonary hypoplasia, sparse eyelashes and and eyebrows, thin dysplastic clavicles. The histologic abnormalities of the skin are located in a thin dermis, consisting of compactly arranged collagen fibers, scanty elastic fiber. The dermoepidermal junction is flat, and epidermal appendages are absent, miniaturized or immature. The presence of adipose tissue may be increased. We report on the first Korean case of restrictive dermopathy with typical clinical features and histological findings.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.119-128
• /
• 2013

In this research, PEI/PEBAX composite hollow fiber membrane was used for the removal of water vapor from gases. PEI (Polyetherimide) substrate membrane was spinned by dry-wet phase inversion method and coated with PEBAX (Polyether block amides) 3533 and PEBAX1657. Fabricated fibers typically had an asymmetric structure of a dense top layer supported by a sponge-like substructure through scanning electron microscopy (SEM). $H_2O/N_2$ mixture gas was used to compare the performance of separation according to temperature, pressure and water activity. The results of PEBAX3533 and PEBAX1657 composite membranes respectively showed $H_2O/N_2$ selectivity of 61.7~118.5 and 85.3~175.4 according to operating conditions. PEBAX3533 composite hollow fiber membranes module showed the water vapor removal of 90%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1003-1007
• /
• 2007

최근 기상이변, 불투수층의 증가와 배수체계개선 등의 요인으로 인한 홍수량의 증대로 하도방어 위주의 현재 홍수방어체제는 지속적인 치수사업의 시행에도 불구하고 오히려 하류에서의 홍수가 격심해지는 등 상당한 어려움에 직면하고 있다. 따라서 최근의 유역종합치수계획에서는 천변저류지 등에 의한 면적 개념의 2차원적 홍수량 분담을 통한 피해의 잠재성을 경감시키고자 하는 방안들이 제시되고 있다. 이러한 기술적 수요의 증가에 따라 낙동강유역종합치수계획, 삽교천유역종 합치수계획 등에서는 중규모 이상의 천변저류지가 검토되었지만 이러한 예는 대하천유역이므로 홍수피해가 빈발하는 농촌지역의 중소규모 하천에서는 계획된 적이 없다. 지금까지 지속적인 하천개수사업으로 2004년말 현재 하천연장 기준으로 전국의 하천 개수율은 78%에 이르고 있다. 이 중 국가하천과 지방1급하천은 약 15%로서 개수율이 약 90%이상으로 높고, 지방2급하천은 약 85%를 차지하나 대부분은 농촌지역에 위치하여 약 70% 미만의 낮은 개수율을 나타내고 있으므로 향후 중소규모유역의 지방2급하천에서 하천개수가 지속적으로 추진될 것이다. 현재 하천정비기본계획이 미수립된 하천구간에 대하여 하도계획시 제방축제에 의한 경제성이 미미한 일부 구간에 무제부의 소규모 아지늪을 조성하고, 홍수파의 전파속도를 저감하여 하류의 홍수집중을 경감시키고 유수 에너지를 감소시키며 아울러 본천의 유수환경과는 다른 습지로서의 정수환경을 창출하여 하천생태계의 다양성을 확보하는 방안도 있을 것이다. 본 연구에서는 경남 하동군에 위치하는 지방2급하천인 주교천에 약 $4000m^2$의 소형 습지(아지늪)를 2004년 3월에 조성하고 2006년 11월에 습지의 어류 및 수생식물에 대한 모니터링을 실시하여 아지늪의 하천생태의 다양성의 달성도를 평가하였다. 또한 주교천에서 홍수량의 증가에 따른 홍수류의 유속 변동과 그에 따른 에너지의 변화를 고찰하기 위하여 HEC-RAS를 적용하고 주교천 아지늪 주변의 수리학적 거동을 고찰하였다.

• The Korean Journal of Mycology
• /
• v.13 no.2
• /
• pp.83-87
• /
• 1985

The temperature dependency and the stability of enzyme systems for $11{\alpha}-hydroxyla­tion$ of progesterone were investigated using Aspergillus phoenicis. Though A. phoenicis conserves high enzyme activities for lactose hydrolysis even at high temperatures, the bioconversion reaction of progesterone by this strain was found to be very temperature sensitive. The compositions of reaction mediums of inside and outside of cells were analyzed using sonication technique. At early stage of reaction, the concentration of $11{\alpha}-hydroxyprogesterone$ of cell inside was higher than that of outside. But as the reaction proceeded further, the $11{\alpha}-hydroxyprogesterone$ existing inside of cells being converted into another products, its concentration was lower within the cells that in the bulk medium. Even in the reaction mediums containing organic solvents, A. phoenicis was founded to be able to metabolite, so that $11{\alpha}-hydroxyprogesterone$ can be produced continuously from fixed bed reactions packed with immobilized A phoenicis in vivo.

• Composites Research
• /
• v.28 no.6
• /
• pp.383-388
• /
• 2015

Ionic Polymer-Metal Composite (IPMC) consisting of soft membrane plated by platinum electrode layers on both surfaces generates electric energy when subjected to various mechanical stimuli. The paper proposes a circuit model that describes the physical composition of IPMC to predict the voltage generation characteristic corresponding to bending motion. The parameter values in the model are identified to minimize the RMS error between the real and simulated outputs. Following the design of IPMC circuit model, the state observer of the model is designed by using pole placement technique which improves the model accuracy. State observer design technique is also applied to find the inverse model which estimates the input bending angles from the output voltage data. The results show that the inverse model estimates input bending angles fairly well enough for the further applications of IPMC not only as an energy harvester but also as a bending sensor.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.597-600
• /
• 2008

In this study the reason which researches the feature of the exposure type waterproofing it uses the technique of the soft FRP it uses the soft unsaturated polyester and the square groove cutting technique with respects and solves the interface separate problem because of the rigid FRP it is used with the repairs and retrofit materials it is caused by in adhesion of concrete insufficiency. The feature of this technique was the dispersion and the reinforcement of the fatigue stress due to the integration behavior and the reinforcement due to the glass-fibre of the concrete due to the soft FRP resin and, it investigated the crack appearance confrontation of concrete and the cohesion stability of the concrete due to the square groove cutting technique with importance. The result of research when it applies the soft FRP with the exposure type waterproofing, is judged with the fact that it will be able to expect a bulge resistance confrontation and creak confrontation ability and cohesion stability improvement.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.6
• /
• pp.562-570
• /
• 2009

An Experimental study was conducted on the flow characteristics and interference heating caused by a two-dimensional object protruding from a flat plate using a blow-down type of hypersonic wind tunnel. Inflow condition was a free-stream Mach number of 7.0 and a unit Reynolds number of $2.0{\times}10^6/m$. Experimental conditions were varied with three heights of protuberance for two flat plate models which have different lengths. Experimental data were obtained from Schlieren visualization images and heat flux measurements. Also, this paper suggests hypersonic experimental techniques such as boundary-layer detection method in detail. A Large separation region was observed in front of the protuberance and that region was very sensitive to the height of protuberance and the length of the flat plate. For only the highest protuberance, a severe jump of heat flux was observed at the top station among the measuring points. Measured heat flux is large when the height of protuberance is large and the length of flat plate is long.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.418-418
• /
• 2010

최근 친환경 저전력 차세대 조명소자로 발광다이오드가 각광을 받고 있다. 하지만 종래의 수평형 발광다이오드는 사파이어 기판의 열악한 열전도도 및 전기전도도 특성으로 인하여 효율적인 열방출의 저하가 생기게 되고, 양전극과 음전극의 수평배치에 기인한 심각한 전류쏠림현상 등이 수평형 발광다이오드의 고전력 소자로서의 응용에 걸림돌로 작용하고 있다. 근래에 수평형 발광다이오드의 대안 중 하나로 수직형 발광다이오드에 대한 연구가 활발히 진행되고 있다. 수직형 발광다이오드에서는, 수평형 발광다이오드에서의 전류쏠림현상을 향상시키기 위해 얀전극과 음전극을 수직으로 배치시킨다. 그리고 열전도도 및 전기전도도 특성이 떨어지는 사파이어를 제거하기 위해 LLO(Laser Lift Off)공정이 사용된다. LLO공정으로 인해 수직형 발광다이오드의 구조는 수평형 발광다이오드와 달리 n-GaN이 위로 배치되는 특성을 가진다. 본 연구에서는, 수직형 발광다이오드의 광추출 효율을 증가시키기 위해 SiO2 나노입자를 이용한 GaN 표면요철 형성기술을 개발, 적용 하였다. SiO2 나노입자를 n-GaN상에 단일층으로 분산시키기 위해 PR(PhotoResist), 나노입자, IPA(Isopropyl Alcohol)이 혼합된 용액을 스핀코팅시켰고 그 결과를 SEM으로 확인할 수 있었다. GaN 식각을 위해 SiO2 나노입자를 마스크로 사용하였고, BCl3가스를 사용한 건식식각을 진행하였다. 그 결과 조밀하고 균일한 크기의 Cylinderical Trapezoid 식각 형상이 n-GaN표면에 형성되었음을 SEM으로 확인할 수 있었다. 우리는 표면요철이 없는 발광다이오드와 SiO2 나노입자를 이용한 표면요철이 형성된 발광다이오드의 특성을 비교하였다. 그 결과 표면요철이 있을 때 광출력이 증가함을 확인할 수 있었다. 거기에 더하여 표면요철의 높이가 300nm~1000nm로 변화함에 따른 소자의 특성변화 또한 관찰할 수 있었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.516-523
• /
• 2020

Since the aging of coastal structures have been increased, the researches about the reinforcements of the existing aged structures are needed. Especially, the existing armor units placed on rubble mound structures should satisfy the stability against the increased design wave conditions. However the researches about these design problems have not been performed. In this study, the hydraulic model tests to investigate the stability number about the additionally placed armor unit were conducted. The main armor unit is a Tetrapod. The test results showed that the stability number (Kd) for additionally placed armor units(Tetrapod) increased up to maximum 10% comparing with that for 2 layers tetrapod (Kd = 8) within these test conditions with the pattern placing for existing armor layers and the stable armor layer slope for the non overtopping condition.