• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.276-292
• /
• 2018

This study was conducted to investigate the trends in domestic and international disaster-related research through a systematic review of the literature and to establish a basis for future disaster-related countermeasures and development directions. A related literature search was conducted through the domestic and foreign databases through the combination of disaster-related terms from 2000 until February 28, 2017, and 79 articles were used in the analysis based on selection and exclusion criteria of 177 total documents. As a result of the research, 31.6% of disaster research type was quantitative studies, and 29.1% of the major disciplines were medical research. In addition, there were engineering(18.9%), public administration(13.9%), and nursing(11.4%). In foreign literature, there are many triage studies for the classification of patients in multiple lesions. On the other hand, only 30.4% of total triage studies in Korea were detected. Most of them were related to triage development, triage evaluation, triage research, and reviews. In addition, according to the disaster nursing capacity framework of the International Council of Nurses, 72.3% of studies were related to the response phase. Future research on disasters requires interdisciplinary convergence, patient classification, and technology integration to improve the survival rate of multiple injuries, and an integrated system based on the results of collaborative research among interdisciplinary groups is needed.

• Journal of the Korean Ceramic Society
• /
• v.23 no.1
• /
• pp.13-20
• /
• 1986

Zirconia soild electrolytes containing 4~10mol% of yttria were prepared by wet-blending of oxides and rea-ction-sintering, Sinterbility and degree of stabilization were optimized for the development of oxygen sensor. Fracture strength thermal expansion coefficient electrical conductivity and galvanic potential were measured and discussed with respect to the amount of ytria addition phase transformation microstructure and degree of stabilization. It was found that sintering and stabilization occurred when the composition was designed to be near the boundary region of $ZrO_2-Y_2O_3$ binary system. In such away a good zirconia solid electrolyte suitable for oxygen sensor could be developed.

• Korean Journal of Materials Research
• /
• v.7 no.5
• /
• pp.411-416
• /
• 1997

수소 및 산소분위기 하에서 2Y-TZP 및 3Y-PZP 세라믹스를 소결하여 각각 제조한 다음, 각 시편의 미세구조 및 25$0^{\circ}C$에서의 등온상전이 거동을 비교하여 고찰하였다. 그 결과 수소분위기에서 소결한 모든 시편의 표면에서는 Zr$_{4+}$ 이온의 환원에 의해 산화분위기에서 소결한 시편에 비하여 색이 검게 변하였으며, 장시간 소결시 시편 표면에 조대 입자의 생성 및 입계 이완이 관찰되었다. 이에따라 수소분위기 하에서 장시간 소결된 시편의 경우 냉각 시 상전이가 일어나 다량의 단사정상이 상온에서 존재하였다. 저온 aging동안 등온상전이 속도는 산소분위기에서 소결한 시편보다 수소분위기에서 소결한 시편에서 낮게 나타났으며, 이러한 경향은 $Y_{2}$O$_{3}$의 고용량이 크고, 입자크기가 적은 시편일수록 증가하였다. 또한 2Y-TZP 시편에서는 입자크기에 상관없이 대부분의 정방정상이 단사정상으로 빨리 등온상전이를 일으켰으나, 3Y-TZP 시편의 경우, 등온상전이는 입자크기가 증가함에 따라 상전이 속도도 증가하였다.

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1187-1191
• /
• 2000

정방정형 지르코니아를 상온에서 안정화시키는 이트리아와, 지르코니아의 저온 열화을 억제하고 파괴강도의 증가에 기여하는 알루미나를 YAG(5Al$_2$O$_3$.3Y$_2$O$_3$) 졸의 형태로 m-ZrO$_2$와 알루미나의 혼합 slurry에 첨가하여, m-ZrO$_2$를 yttria 안정화 지르코니아로의 in situ 변환과 동시에 알루미나의 분산도를 향상시키고자 하였다. 20wt% 알루미나-지르코니아(YSZ)의 복합체 (20ATZ)를 1450$^{\circ}$~150$0^{\circ}C$에서 상압소결하여 0.5$mu extrm{m}$ 이하의 균일한 미세구조로 얻었다. 이 복합체는 정방정형 지르코니아와 $\alpha$-알루미나 상으로만 이루어지었고, 소결밀도 >99% TD이었다. 제조된 복합체의 파괴강도는 810 MPa로, 고상법으로 $Al_2$O$_3$와 3Y-ZrO$_2$분말로부터 제조된 시편의 682 MPa 보다 약 20% 향상되었고, 파괴인성은 5.52 MPa.m$^{1}$2/로 고상법으로 제조된 시편의 5.39 MPa.m$^{1}$2/과 비슷하였다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.3
• /
• pp.1-10
• /
• 2004

Quite many papers about moving objects database (MOD) have been Published. Most of them are concerning of improving efficiency of updating policy, but none of them talks about verification of system's requirements. No matter how efficient updating policy is employed, a system designer still has to verify if the MOD satisfies user's requirement at the beginning of system lifestyle. For example, if a MOD serves n moving objects, then the designer must verity if it can update information for n moving objects and provide new information to moving objects within specified time limit. For the purpose of requirement analysis of MODs, we build a Petri net model for MOD using Design/CPN, and then we show how to verify whether the MOD satisfies user's requirements by simulation. The contribution of this paper is providing a simulation model for requirement analysis of MOD for the first time. The model is expansion of our previous fuzzy-timing Petri net model. The distance-based updating policy, and distributed database management system are reflected in this model and system analysis for moving objects is considered. It is built in Design/CPN so that the simulation can be automatically performed. The application of our model is not limited to requirement analysis, it is useful to study other MOD design issues, such as the trade-offs between update cost and information accuracy, and between the tim interval needed for updating database and MOD system resources, etc.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.28-37
• /
• 2011

With growing concerns about healthy life recently, although the podiatry which deals with the whole area for diagnosis, treatment of foot and leg, and prevention has been widely interested, research in our country is not active. Also, because most of the previous researches in data analysis performed the quantitative approaches, the reasonable level of reliability for clinical application could not be guaranteed. Clinical data mining utilizes various data mining analysis methods for clinical data, which provides decision support for expert's diagnosis and treatment for the patients. Because the decision tree can provide good explanation and description for the analysis procedure and is easy to interpret the results, it is simple to apply for clinical problems. This study investigate rules of item of diagnosis in disease types for adapting decision tree after collecting diagnosed data patients who are 2620 feet of 1310(males:633, females:677) in shoes clinic (department of rehabilitation medicine, Chungnam National University Hospital). and we classified 15 foot diseases followed factor of 22 foot diseases, which investigated diagnosis of 64 rules. Also, we analyzed and compared correlation relationship of characteristic of disease and factor in types through made decision tree from 5 class types(infants, child, adolescent, adult, total). Investigated results can be used qualitative and useful knowledge for clinical expert`s, also can be used tool for taking effective and accurate diagnosis.

• Korean Journal of Materials Research
• /
• v.27 no.8
• /
• pp.445-450
• /
• 2017

YSZ (Yttria-stabilized zirconia) is a ceramic material that is used for electronic and structural materials due to its excellent mechanical properties and specific electrical characteristics according to the Yttrium addition. Hydrothermal synthesis has several advantages such as fine particle size, uniform crystalline phase, fast reaction time, low process temperature and good dispersion condition. In order to synthesize YSZ nanoparticles with high crystallinity, hydrothermal synthesis was performed at various concentrations of NaOH. The hydrothermal process was held at a low temperature ($100^{\circ}C$), with a short process time (2,4,8 hours); the acidity or alkalinity of solution was controlled in a range of pH 2~12 by addition of NaOH. The optimum condition was found to be pH 12, at which high solubility levels of Y(OH) and Zr(OH) were reported. The synthesized nano powder showed high crystallinity and homogenous composition, and uniform particle size of about 10 nm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.5
• /
• pp.331-337
• /
• 2017

Thermal batteries, reserve power source, is activated by melting of molten salt at the temperature range of $350{\sim}550^{\circ}C$. To immobile the molten state electrolyte when the thermal battery is activated, the binder must be added in electrolyte. Usually, molten salts include 30~40 wt% of MgO binder to ensure electrical insulation as well as safety. However, the conventional MgO binder tends to increase ionic conductive resistance and thus the inclusion of the binder increases the total impedance of the battery. This paper mainly focused on the study of yttria stabilized zirconia (YSZ) as an alternative binder for molten salt. The chemical stability between the molten salt and YSZ is measured by XRD and DSC. And the sufficient path for ionic conduction on molten salt could be confirmed by the enhanced wetting behavior and the enlarged pore size of YSZ. The electrochemical properties were analyzed using single cell tests so that it showed the outstanding performance than that using MgO binder.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.2
• /
• pp.150-158
• /
• 2005

Added ratio of 8YSZ powder and organic compounds (solvent, plasticizer, dispersant, binder) properly. It manufactured electrolysis membrane by wet process that make slurry and dry process that do not use organic compounds. In the case of wet process, harmony combination and method of organic compound are an importance element in slurry manufacture. This slurry did calcine at temperature of 140$^{\circ}C$ in Furnace and manufactured electrolyte disk by Dry pressing method. Like this, manufacturing disk sintered at temperature of $1300^{\circ}C,\;1400^{\circ},\;1500^{\circ}C$ in Furnace and completed electrolysis membrane. Confirmed change of crystal structure and decision form through analysis of density, SEM, XRD according to change of sintering temperature, and considered relation with ion conductivity.

• Journal of the Korean Ceramic Society
• /
• v.30 no.9
• /
• pp.717-722
• /
• 1993

Effects of microstructures on the electrical properties of ZrO2 based ceramics were analyzed by modeling layer arrangements and mixed phase structures. Single layers and alternating multilayers were made from 3mol% and 8mol% Y2O3 doped ZrO2 powders, while mixed specimen was made by blending and compacting these raw powders. After sintering at 150$0^{\circ}C$ for 2hr in air, AC impedance characteristics were measured. Contributiion of bulk comonent to total resistivity and its temperature-dependence were larger in 8Y-ZrO2 single layer than in 3Y-ZrO2 single layer. The multilayered specimen connected in serial to electrodes showed partial characteristics of both 3Y-ZrO2 and 8Y-ZrO2 single layers. The multilayered specimen connected in parallel to electrodes and the mixed specimen exhibited characteristics mainly of 8Y-ZrO2 single layer. The multilayered specimen connected in parallel to electrodes revealed the highest electrical conductivity near the operating temperature of solid oxide fuel cell. However, it is expected that the mixed specimen is appropriate for the applications because of its relatively high electrical conductivity with high strength expected.