• 제목/요약/키워드: 이차 유동

검색결과 244건 처리시간 0.033초

매끈한 튜브의 입구 영역에서 난류유동에 의한 대류와 비회복사 (Non-gray Radiation with Turbulent Convection in the Entrance Region of a Smooth Tube)

  • 서태범
    • 설비공학논문집
    • /
    • 제7권4호
    • /
    • pp.667-680
    • /
    • 1995
  • 튜브 내의 입구영역에서 난류 유동에 의한 대류와 비회복사(non-gray radiation)가 동시에 일어날 때의 열전달특성을 수치해석적으로 연구하였다. 작동유체는 이산화탄소, 수증기, 질소의 혼합가스라고 가정하였다. 지배방정식을 계산하기 위해 유한차분법이 이용되었고, 복사전달방정식을 이차편미분방정식으로 바꾸기 위해 P-1 근사법이 사용되었다. 그리고 혼합가스의 비회흡수계수(non-gray absorption coefficient)는 지수광폭밴드모형(exponential wide band model)을 이용해서 구하였다. 열전달특성에 대한 온도조건의 영향을 조사하기 위해 튜브의 축방향에 대한 평균 온도와 뉴셀트수(Nusselt number)의 변화를 몇 가지 다른 온도조건에 대해 나타내었다. 또한, 가스의 성분조성에 대한 영향을 조사하였으며, 이러한 결과에 기초해서 튜브 내에서 난류유동에 의한 대류와 비화복사가 동시에 일어날 때의 복사 뉴셀트수를 쉽게 예측할 수 있는 방법을 제시하였다.

  • PDF

유동핵연료원자로를 위한 이차원 동특성 코드 AMBIKIN2D 개발 및 검증 (Development and Verification of AMBIKIN2D, A Two Dimensional Kinetics Code for Fluid Fuel Reactors)

  • 이영준;오세기
    • 에너지공학
    • /
    • 제17권1호
    • /
    • pp.23-30
    • /
    • 2008
  • 용융염 원자로는 고체핵연료를 사용하는 고전 원자로와는 달리 유동성을 갖는 액체핵연료를 장전하여 운전한다. 기존 동특성 코드는 핵연료의 유동으로 인한 동적 노물리 특성 영향을 고려하지 않기 때문에 용융염 원자로의 동특성 및 안전해석에 사용할 경우 신뢰성을 보장할 수 없다. 지금까지는 핵연료의 유동을 고려한 1점 동특성방정식을 이용하여 제한적으로 시스템안정성분석을 수행해 왔으나 이 경우 상세한 노심구조에서의 핵연료 및 중성자 거동에 대한 공간 종속성을 평가할 수 없다. 그러므로 핵연료의 유동 특성이 고려된 다차원 동특성 모델을 해석할 수 있는 컴퓨터 코드 개발이 필요하다. 본 논문은 용융염 원자로의 공간종속 중성자 동특성 해석을 위한 2군, 2차원 코드인 AMBIKIN2D의 개발 및 이에 수반하는 검증연구의 일환으로서 MSRE의 안정성실증실험을 모사하였다. 또한 비교 대상으로는 ORNL에서 개발한 Lumped parameter 방법을 사용한 일점 동특성 방정식에 의한 계산 결과를 포함하여 AMBIKIN2D의 정확성을 확인하였다.

상호상관 PIV를 이용한 예혼합 분무화염의 계측에 관한 연구 (A Study on Measurement of Premixed Spray Flame using Cross-correlation PIV)

  • 양영준;김봉환
    • 에너지공학
    • /
    • 제14권4호
    • /
    • pp.259-267
    • /
    • 2005
  • 예혼합 분무화염의 상세한 연구기구를 관찰하기 위하여 예혼합 분무화염 중의 분무단면상의 확대촬영과 또한 연소시의 순간적 이차원 유동장을 얻기 위해 미소시간차를 가진 2연속 분무단면 화상에 대해 상호 상관 PIV를 적용하였다. PIV에 통상 사용되어지는 펄스 레이저가 아닌 연속발진 레이저를 PIV에 적용하는 기법 등을 나타내었다. 또한 통계적 PIV 해석법을 이용하여 얻은 상호상관 PIV의 결과를 PDA에 의해 측정된 결과와 비교하여, 상호상관 PIV는 PDA의 계측에 의한 결과와 잘 일치한다는 결론에 이르렀다. 연속발진 레이저를 이용한 상호상관 PIV를 예혼합 분무화염에 적용하여 본 연구에서 적용한 기법이 분무화염의 구조를 관찰하는데 매우 유용함을 검증하였다.

이차모멘트 난류모델을 사용한 Rayleigh-Benard 자연대류 유동 해석 (ANALYSIS OF RAYLEIGH-BENARD NATURAL CONVECTION WITH THE SECOND-MOMENT TURBULENCE MODEL)

  • 최석기;김성오
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 학술대회
    • /
    • pp.111-117
    • /
    • 2008
  • This paper reports briefly on the computational results of a turbulent Rayleigh-Benard convection with the elliptic-blending second-moment closure (EBM). The primary emphasis of the study is placed on an investigation of accuracy and numerical stability of the elliptic-blending second-moment closure for the turbulent Rayleigh-Benard convection. The turbulent heat fluxes in this study are treated by the algebraic flux model with the temperature variance and molecular dissipation rate of turbulent heat flux. The model is applied to the prediction of the turbulent Rayleigh-Benard convection for Rayleigh numbers ranging from $Ra=2{\times}10^6$ to $Ra=10^9$, and the computed results are compared with the previous experimental correlations, T-RANS and LES results. The predicted cell-averaged Nusselt number follows the correlation by Peng et al.(2006) ($Nu=0.162Ra^{0.286}$) in the 'soft' convective turbulence region ($2{\times}10^6{\leq}Ra{\leq}4{\times}10^7$) and it follows the experimental correlation by Niemela et al. (2000) ($Nu=0.124Ra^{0.309}$) in the 'hard' convective tubulence region ($10^8{\leq}Ra{\leq}10^9$) within 5% accuracy. This results show that the elliptic-blending second-moment closure with an algebraic flux model predicts very accurately the Rayleigh Benard convection.

  • PDF

5공과 7공 프로브를 이용한 터빈 캐스케이드의 이차유동 측정 결과 비교연구 (Comparative Study on the Secondary Flow Measurement in a Turbine Cascade Using 5-hole and 7-hole Probes)

  • 노영철;이용진;박정신;김학봉;곽재수
    • 한국유체기계학회 논문집
    • /
    • 제13권6호
    • /
    • pp.5-12
    • /
    • 2010
  • Comparative study on the flow measurement by 5-hole and 7-hole probes was conducted in a linear cascade with tip clearances of 2.3%, 3.1%, and 4.4% of the blade span. Calibration range of the 5-hole and the 7-hole probes were ${\pm}25$ and ${\pm}50$ degrees, respectively. Results show that the secondary flow and total pressure loss measured by the 5e-hole and 7-hole probes were similar at small tip clearance cases. However, at the tip clearance of 3.1% and 4.4% of the blade span cases, flow angles exceeding the calibration range of the 5-hole probe were observed. Because of the wider calibration range, larger flow angle by strong leakage vortex could be measured by the 7-hole probe.