• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.2
• /
• pp.137-147
• /
• 2008

A reliability analysis has been performed to investigate the systematic stability of multi-failure modes of rubble-mound breakwaters. The reliability functions of four different failure modes are established straightforwardly. AFDA(Approximate Full Distribution Approcah) reliability models for each failure modes are directly developed and satisfactorily calibrated through the comparison with CIAD's results. In the reliability analysis of single failure mode, the probabilities of failure are calculated and the influence coefficients of random variables in the failure modes are properly evaluated. Meanwhile, three different models such as uni-modal bounds, bimodal bounds, and PNET are applied to evaluate the probabilities of failure of multi-failure modes for rubble-mound breakwaters. It may be found that uni-modal bounds tend to overestimate the probability of failure of multi-failure modes. Therefore, for the systematic reliability analysis of multi-failure modes, it is recommended to use bi-modal bounds or PNET which consider the correlation between the failure modes for rubble-mound breakwaters. By introducing the reliability analysis of multi-failure modes, it could be possible to find out the additional probabilities of failure occurred by the multi-failure modes of a multi-component system such as rubble-mound breakwaters.

• Journal of the Korea Concrete Institute
• /
• v.22 no.4
• /
• pp.595-603
• /
• 2010

Monte-Carlo simulation technique is often used in order to predict service life of concrete structure subjected to chloride penetration in marine environment based on probability theory. Monte-Carlo simulation method, however, the method gives different results every time that the simulation is run. On the other hand, moment method, which is frequently used in reliability analysis, needs negligible computational cost compared with simulation technique and gives a constant result for the same problem. Thus, in this study, moment method was applied to the calculation of corrosion-initiation probability. For this purpose, computer programs to calculate failure probabilities are developed using first-order second moment (FOSM) and second-order second moment (SOSM) methods, respectively. From the analysis examples with the developed programs, SOSM was found to give a more accurate result than FOSM does. The sensitivity analysis has shown that the factor affecting the corrosion-initiation probability the most was the cover depth, and the corrosion-initiation probability was influenced more by its coefficient of variation than its mean value.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.445-448
• /
• 1998

고유음향 임피던스가 다른 물질이 층상구조를 이루고 있는 매질내에서 임의의 한 층에 형성된 이차원 초음파 음장이 다른 매질로 전파될 때에의 특성을 각스펙트럼법에 의해 해석하였다. 음원으로서는 baffle된 원형 트랜스듀서를, 층상구조를 매질로서는 물과 생체조직(지방)의 경계를 각각 고려하였다. 해석에 있어서는 먼저 각스펙트럼 분해요소, 즉, 음원의 크기 및 거리에 의존하는 기준음장의 최적 크기와 샘플링 간격을 균질매질을 이용하여 결정한 다음, 그 요소를 층상매질에 적용하였다. 그 결과, 경계면에서의 입사각(공간주파수)의 의존하는 투과계수에 입사음장의 곱으로 나타내어지는 투과음장은 각스펙트럼법에 의해 짧은 시간내에 정도 높게 산출될 수 있음을 보인다.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.1
• /
• pp.3-12
• /
• 1993

용접부의 파괴특성을 J-적분을 이용하여 유한요소법으로 해석하였다. 용접부 의 열전달 해석 및 응력해석을 수행한후 crack을 도입하여 crack 주위의 자류응력 해석을 통하여 crack tip에서의 J- 적분치를 계산하였다. 이차원 및 삼차원에서의 파괴해석을 위한 modeling 과정을 소개하였으며 대표적인 계산결과를 소개하였다.

• Smart Media Journal
• /
• v.12 no.1
• /
• pp.102-111
• /
• 2023

As one of the image symbols, the second frame has rich symbolic metaphor. In previous studies, second frames are mostly presented in physical forms such as doors, windows, but in <The Power of the Dog>, there are various forms of second frames, providing more types for the study of second frames. Panofsky's Iconology has put forward a rigorous research method on how to interpret the meaning of image symbols in the picture. This study aims to use Panofsky's Iconology to analyze the second frame in <the Power of the dog>. The purpose is to expand the methodology of film image research and break through the problem that the Iconology analysis of film image stays in narrative analysis (iconographical analysis). It can be seen from the results of this study that the second frame has different visual presentation according to the requirements of narrative. In the narrative of the film, it symbolizes the depressed tone of the film and the stressful relationship between different characters. What director Campion wants to show through the second frame is that in the film industry where the problem of women is getting better, the motif of feminist film creation has changed from the expression of female appeals in binary opposition to the expression of the appeals of diverse groups in "decentralization."

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2004

Adaptive finite element analysis, in which its solution error meets with the user defined allowable error, is recently used to improve the reliability of finite element analysis results. This adaptive analysis is composed of two procedures; one is the error estimation of an analysis result and the other is the reconstruction of finite elements. In the (p-method, an element size is controlled by relocating of nodal positions (r-method) and the order of an element shape function is determined by the hierarchical polynomial (p-method) corresponding to the clement solution error by the enhanced SPR. In order to show the effectiveness and the accuracy of the suggested rp-method, various numerical examples were analyzed and these analysis results were examined by comparing with those obtained by the existed methods.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.298-303
• /
• 1996

액체금속로 IHX 의 열전달 해석모형을 개발하기 위한 일차적인 단계로서 교차류 열전달 모형특성에 대한 연구를 수행하였는 그 주요내용은 새로운 대수화 (finite differencing) 기법인 경계점 기법의 특성을 분석하여 이기법의 적절성을 확인하고 IHX 기하형태 및 운전 요건에 따른 격자수에 대한 요건을 분석하고 이로부터 IHX 해석에 간이 이차원 해석 모형 사용의 타당성을 확인하였다.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.3
• /
• pp.11-20
• /
• 2021

In this paper, the approximately coupled method of finite element method and boundary element method to obtain efficient and accurate analysis results is proposed for a two-dimensional elasto-static problem with a geometrically abruptly changing part. As the finite element of a two-dimensional problem, three-node and four-node plane stress element is applied, and as the boundary element of a two-dimensional problem, three-node boundary element is applied. In the modeling stage, firstly, an entire analysis target object is modeled as finite elements, and then a geometrically abruptly changing part is modeled as boundary elements. The boundary element is defined using the nodes defined for modeling finite elements. In the analysis stage, finite element analysis is firstly performed on a entire analysis target object, and boundary element analysis is automatically performed afterwards. As for the boundary conditions at boundary element analysis, displacement conditions and stress conditions, which are the results of finite element analysis, are applied. As a numerical example, the analysis results for a two-dimensional elasto-static problem, a plate with a crack, are presented and investigated.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.3
• /
• pp.51-56
• /
• 2012

The wing is a framework composed chiefly of skin, spars, ribs and can be simplified by matrix structure. In this paper, a displacement reliability of matrix structure is analysed by AFORM(Advanced First Order Reliability Method) and applicability is assessed.

• Nuclear Engineering and Technology
• /
• v.26 no.3
• /
• pp.345-354
• /
• 1994

Numerical Predictions including secondary flows have been Performed for fully developed turbulent single-phase rod bundle flows. The k-$\varepsilon$ turbulence model(two equation model) for the isotropic eddy viscosity, together with an algebraic stress model for generating secondary velocities, enabled the prediction of mean axial velocities, secondary velocities, and turbulent kinetic energy and turbulent stresses. Comparisons with experiment hate shown that the influence of secondary motion on mean flow and turbulence is dearly evident. The convective transport effects of secondary flow on the velocity field have been identified.