• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2804-2809
• /
• 2008

Experimental results and numerical computations were conducted to investigate the effect of the confined wall on the flow and heat transfer characteristics for a two-dimensional impinging jet. Experimental results and Numerical solutions were obtained by using the particle image velocimetry and the commercial CFD code (CFX 11), respectively. The parameters studied were jet Reynolds number (Re=5,000), conditions of confined wall (unventilate), nozzle to plate spacings ($H/W=1{\sim}16$), and nozzle to nozzle spacing (S/W=6). Experimental and numerical results were agreed well with each other. The maximum heat transfer point was found variation of nozzle to plate spacings.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.2
• /
• pp.127-133
• /
• 1999

The MOSU model, a depth-averaged two-dimensional sediment transport model, is applied to simulate the bed level changes before and after dock construction in Daemyung site. The model is a semi¬coupled finite difference model that can be applied to a river, a reservoir, a lake, estuaries, or coastal regions, The model is able to simulate the transport of fine sand, silt, and clay. The model parameters are estimated by qualitative calibration. A prediction result of the numerical model shows that the bed level changes due to dock construction are little.

• KSBB Journal
• /
• v.18 no.1
• /
• pp.35-38
• /
• 2003

Analysis of proteome in amniotic fluid was performed by 2-D PAGE (polyacrylamide gel electrophoresis). Proteins in amniotic fluid were separated by centrifugation and solubilized in buffer solution for IEF, using an IPG strip of pH 4-7L. Both a homogeneous slab gel of 12.5% and a gradient gel of 8-18%, were used. After 2-D PAGE, spots were stained with silver nitrate and picked up for in-gel digestion. Digested peptides were analyzed by MALDI-TOF and proteins were further identifical. More protein spots were detected in the gradient gels and a protein not previously reported was identified.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.554-559
• /
• 2016

본 논문은 EDISON CFD를 사용하여 스포일러가 장착된 무미익 BWB UCAV에 대하여 이차원 유동해석을 수행하였다. 무미익 형상은 일반적인 항공기보다 롤과 요 방향의 안정성과 조성성에 있어 불리한 특징을 갖는데 특히 이 착륙 시 고 받음각의 영역에서 발생하는 Pitch-up 현상이 항공기 안정성에 문제를 야기한다. 수직 미익 부재와 pitch-up 현상으로 인한 BWB형상의 UCAV가 지니는 단점을 보완하기 위해서 스포일러가 장착된 형상이 적용되기도 한다 본 연구에서는 윗면과 아랫면에 스포일러가 장착된 경우에 대해 전산유동해석을 수행하였다. 해석결과 윗면의 스포일러는 양력의 감소와 항력의 증가를 야기했으며, 아랫면의 스포일러는 양력과 항력을 모두 증가시켰다. 피칭모멘트의 경우 아랫면의 스포일러가 저받음각에서 안정성을 증가시켰다.

• Radiation Oncology Journal
• /
• v.28 no.3
• /
• pp.177-183
• /
• 2010

Purpose: Simulation using computed tomography (CT) is now widely available for radiation treatment planning for breast cancer. It is an important tool to help define the tumor target and normal tissue based on anatomical features of an individual patient. In Korea, most patients have small sized breasts and the purpose of this study was to review the margin of treatment field between conventional two-dimensional (2D) planning and CT based three-dimensional (3D) planning in patients with small breasts. Materials and Methods: Twenty-five consecutive patients with early breast cancer undergoing breast conservation therapy were selected. All patients underwent 3D CT based planning with a conventional breast tangential field design. In 2D planning, the treatment field margins were determined by palpation of the breast parenchyma (In general, the superior: base of the clavicle, medial: midline, lateral: mid - axillary line, and inferior margin: 2 m below the inframammary fold). In 3D planning, the clinical target volume (CTV) ought to comprise all glandular breast tissue, and the PTV was obtained by adding a 3D margin of 1 cm around the CTV except in the skin direction. The difference in the treatment field margin and equivalent field size between 2D and 3D planning were evaluated. The association between radiation field margins and factors such as body mass index, menopause status, and bra size was determined. Lung volume and heart volume were examined on the basis of the prescribed breast radiation dose and 3D dose distribution. Results: The margins of the treatment field were smaller in the 3D planning except for two patients. The superior margin was especially variable (average, 2.5 cm; range, -2.5 to 4.5 cm; SD, 1.85). The margin of these targets did not vary equally across BMI class, menopause status, or bra size. The average irradiated lung volume was significantly lower for 3D planning. The average irradiated heart volume did not decrease significantly. Conclusion: The use of 3D CT based planning reduced the radiation field in early breast cancer patients with small breasts in relation to conventional planning. Though a coherent definition of the breast is needed, CT-based planning generated the better plan in terms of reducing the irradiation volume of normal tissue. Moreover it was possible that 3D CT based planning showed better CTV coverage including postoperative change.

• Water for future
• /
• v.43 no.2
• /
• pp.66-71
• /
• 2010

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.177-180
• /
• 2006

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.235-236
• /
• 2007

• Communications for Statistical Applications and Methods
• /
• v.4 no.3
• /
• pp.685-692
• /
• 1997

실험자의 주관을 제일 잘 반영한다고 볼 수 있는$I_{\lambda}-$최적 실험계획의 실제적 사용을 위하여 새로운 형태의 가중영역을 제시하였다. 그리고 반응표면분석에서 자주 쓰이는 이차원의 2차형식 함수를 기준으로 이에 대한 성질 및 특징을 알아보았다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.04a
• /
• pp.317-320
• /
• 2000