• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.476-480
• /
• 2009

A polymer composite electrolyte of a blend of poly(methyl methacrylate)(PMMA) and poly(ethylene oxide) (PEO) as a host polymer, the ethylene carbonate as a solvent, and $LiClO_4$ as a salt was studied. The crystallinity of the polymer electrolytes was evaluated using differential scanning calorimeter(DSC). The ionic conductivity of the polymer electrolytes was measured by frequency response analyzer(FRA) method. The effect of PEO/PMMA blend ratios on the ionic conduction in these electrolytes was investigated. The electrolyte films showed a phase separation due to immiscibility of the PMMA with the PEO. The PMMA-rich phase and the PEO-rich phase were produced during a film casting. The ionic conductivity of blend electrolyte was dependent on the content of PMMA and showed the highest value at 20 wt.%. However, when PMMA content exceeds 20 wt.%, the ionic conductivity was decreased due to the slow ionic transport through the PMMA-rich phase.

• Journal of agricultural medicine and community health
• /
• v.43 no.2
• /
• pp.85-96
• /
• 2018

Purpose: This study was to compare health behaviors, DM management and HRQoL among Diabetic patients according to education experience. Methods: Data were obtained from Community health Survey(CHS) of 2015. The participants were 22,937 diabetic patients who had education experience or not. Data were analyzed on complex sample anaysis using SPSS 24 program. Results: The education experience group showed higher percentages of health behaviors and DM Management and higher HRQoL. The significant negative factors influencing HRQoL were Bed ridden experience, higher subjective stress, depression expereince, age, low education and positive factors were good subjective health status, walking, mod-exercise, drinking, employment, spouse, good subjective happiness. Conclusion: These results show that education experience is a way to help diabetic patients' health behavior, DM management, HRQoL.

• KSBB Journal
• /
• v.11 no.4
• /
• pp.462-469
• /
• 1996

Biosolubilization of an Australian lignite was investigated by using Streptomyces viridosporus and Poria cocos. In order to solubilize coals effectively they were pretreated by nitric acid both in surface and liquid cultures. The optimum growth pH was 7.5 for S. viridosporus and 4.5 for P. cocos. The effects of various carbon, nitrogen and metal sources on overall solubilization were also studied. Solubility increased with the addition of urea for S. viridosporus, and peptone and tryptone for P. cocos. However carbon and metal sources had little or negative effects on solubilization. Maximum amount of coal solubilized was 85%(w/w) in a batch fermentation culture. Extracellular materials produced by micro-organism were found to be responsible for the coal solubilization. Approximately 70 to 80% of coal solubilization was determined to be the result of non-enzymatic reactions, and the rest to be the result of enzymatic reactions. Characteristics of the solubilized coal were compared with those of original coal and pretreated coal by the approximate and ultimate composition analysis, and IR-spectrum analysis. The spectroscopic results showed that the mechanism of coal solubilization was caused by continuous oxidation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.4
• /
• pp.155-158
• /
• 2016

Thermal conductivity is a very important factor for applicability and reliability in electrical devices. In this study, Al/graphite composite is fabricated by a mechanical alloying and heat-treatment and its physical properties are characterized. The XRD peak intensity of the $Al_4C_3$ ceramic phase observed in the heat-treated Al/graphite composite increased with heat-treatment temperature and time. The thermal conductivity of the heat-treated Al/graphite composite sample was very lower than that of the pure Al sample, and increased with heat-treatment temperature and time.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.17 no.4
• /
• pp.575-587
• /
• 2010

Purpose: The purpose of this study was to analyze the research on adherence for secondary prevention in patients with coronary artery disease (CAD) in Korea, and to identify the strategies for improvement that should be included in future studies. Methods: Electric literature searches were conducted for Pubmed, CINAHL, RISS4U, KISTI, DBpia, KoreaMed, National Assembly Library, and National Library of Korea. A total of forty two articles published between 1986 and 2009 were selected based on established inclusion criteria. Results: Forty research papers were related to nursing, and there was only one research paper focused 011 elderly people with CAD. There were no papers using concept analysis, qualitative study. or randomized controlled clinical trial. Almost all definitions of adherence were adopted from outdated compliance definitions with the attribute of 'paternalistic obligation', Measurement tools were not based on theoretical framework of adherence but borrowed from tools for measuring self-care, health behavior, or self-efficacy. Overall patient's adherence was analyzed in most studies, except for a few studies which focused on diet and exercise only. Educational strategy was the main strategy used in intervention studies. Conclusions: The concept of adherence and measurement tools need to be clarified, along with development of the specific adherence interventions according to the type of adherence in patients with CAD.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.2
• /
• pp.101-109
• /
• 1998

Hydraulic property of fissured aquifers often depends on geologic structure which acts main channel of groundwater flow. We treated theories of linear flow related to vertical geologic structure. Then, we analyzed the result of two pumping tests conducted in Okmyeong-ri area (Kyeongbook province) using fractal model and found hydraulic characteristic of the fissured aquifer in this area. According to the pump test analyses, groundwater flow around the holes (pumping well D9; observation wells C3 and D7) of test 1 is linear. and is controlled by vertical geologic structure with infinite length and infinitesimally small width. On the other hand, around the hole D10 (pumping well) of test 2, groundwater flow is pseudo-radial (n=1.9) or radial (n=2). Thus, the characteristic of fractured aquifer often shows variable groundwater flow spatially and temporally.

• Radiation Oncology Journal
• /
• v.8 no.1
• /
• pp.51-57
• /
• 1990

Retrospective analyses were done of 48 patients with early glottic cancer, 31 with T1NOMO and 17 with T2NOMO, who received radiation therapy from March 1979 to August 1984 at Seoul National University Hospital with the prescribed full dosage. The median follow-up period was 67 months (range: 34 months$\~$126 months), and the percent follow-up for longer than five years was $85.4\%$ The five-year actuarial overall and recurrence-free survival rates of the whole patient group were $83.2\%\;and\;69.4\%$, respectively. The five-year actuarial overall and recurrence-free survival rates of the T1 group were $87.1\%\;and\;76.0\%$, and those of the T2 group were $76.5\%\;and\;58.2\%$, respectively. Possible causes of the failures to radiation therapy, the dose-response relationship, association with the second malignant tumors, and some recommendations for better treatment outcome are analyzed and discussed.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.351-357
• /
• 2003

Transuranic elements such as Pu, Am and Cm in synthetic solution of spent nuclear fuel samples were determined by electrodeposition followed by alpha-spectrometry after separation using anion exchange and extraction chromatography in order to determine the transuranic elements in radwaste samples from nuclear power plants. Plutonium was separated by 12M HC1-0.1M HI as an eluent on anion exchange column. As a second step Am and Cm were separated in a group by DTPA-Lactic acid as the eluent on HDEHP coated column. The nuclides of $^{239}Pu$, $^{241}Am$및 $^{244}Cm$ separated were determined by alpha-spectrometry after electrodeposition in 0.1M $NaHSo_4$-0.53M $Na_2SO_4$buffer solution as an electrolyte. The recovery yields of $^{239}Pu$, $^{241}Am$및 $^{244}Cm$ were 83.8%, 85.2% and 86.3%, respectively, from the synthetic solution containing uranium and non-radioactive metal elements.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.1-12
• /
• 2009

The objective of this study was to test the effects of crown material, cement type, the direction in which stress is applied and distribution of luting cement that might lead to cement microfracture using 2D Finite Element Method. Twenty three finite element models with a chamfer margin configuration were generated for a mandibular first molar. Crown models exhibited four crown materials: type 3 gold alloy, Ni-Cr alloy, ceramic and composite resin, and two luting cements: zinc phosphate and glass ionomer cements with a thicknesses of $70{\mu}m$. Modeled crowns were loaded axially or obliquely at unit load of 1 N. Areas and levels of stress concentrations within the cement were determined. Stress in the cement layer at the margins of crowns were higher than those in the area away from the margin. Stress under oblique loads were much higher than under axial load. The stiffer crown material produced higher stress and similarly, higher stress were found in cements with the greater Young's modulus.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.997-1005
• /
• 1998

This paper presents a modified on-off algorithm based on the gradient method for providing the phase of each antenna element more accurately and simply compared to the conventional on-off algorithm. The sup4erisority of theproposed method is due to the fact that the proposed method finds the increase and decrease of the array output power more accurately by utilizing the gradient of array output power with respect to the instantaneous phase of array element. The array antenna adopting to the proposed method formsmaximum beam-pattern along the direction of the desired signal by aligning the phase of every antenna enement. The proposed method is applied to both linear and two-dimentional aray for analyzing the result. The capability of the real-time processing of the proposed technique is confirmed by implementing the proposed algorithm with TMS320C30 Evaluation Module. Since the computational load required to form the beam-pattern per snapshot is small, the proposed method is suitable for the mobile communication system of which the response must be fast. By the results obtained from the application of the proposed method to the CDMA mobile communication environment, it is vreified that the performance of the received signal is consideralbly improved.