• Title/Summary/Keyword: 이중 주파수 방법

Search Result 140, Processing Time 0.027 seconds

Electro-optical Characteristics of the Dual-frequency Bistable Nematic Liquid Crystal Cell with Pixel-isolating Polymer Wall (폴리머 격벽에 의해 화소고립된 구조의 이중주파수 쌍안정 네마틱 액정셀의 전기광학 특성)

  • Lee, Seong-Ryong;Lee, Joong-Ha;Shin, Jae-Hoon;Song, Dong-Han;Yoon, Tae-Hoon;Kim, Jae-Chang
    • Korean Journal of Optics and Photonics
    • /
    • v.19 no.3
    • /
    • pp.161-168
    • /
    • 2008
  • We propose a novel bistable nematic liquid crystal cell, which has a dual-frequency liquid crystal material and pixel-isolating polymer wall formed by an anisotropic phase separation of a mixture of liquid crystals and UV-curable pre-polymers. The proposed cell has two stable states of left- and right-handed ${\pi}$-twist. The switching between the two states is achieved by using a sequential waveform of low and high frequencies. A transmissive bistable liquid crystal display is designed, which achieves high contrast ratio by using the proposed cell and optical films.

정밀단독측위를 이용한 저궤도위성의 궤도결정 정밀도 분석

  • Choe, Jong-Yeon;Lee, Sang-Jeong
    • Bulletin of the Korean Space Science Society
    • /
    • 2011.04a
    • /
    • pp.25.2-25.2
    • /
    • 2011
  • 저궤도위성의 정밀궤도결정은 GPS 위성과 수신기의 시계 공통오차를 제거하기 위해 이중 차분하는 방법으로 요구된 위치 정밀도를 충족시켜왔다. 그러나 빠른 속도로 지구를 회전하는 저궤도위성의 정밀궤도결정에 있어 이러한 이중 차분방법은 지구상에 광범위하게 분포된 지상 IGS 망 처리에 많은 계산 부담을 안고 있다. 그리고 지상 측지뿐만 아니라 저궤도위성을 이용한 기상관측 또는 긴급한 영상 처리 응용분야에서도 고정밀도 준실시간(Near Real Time-NRT) 처리가 요구되고 있다. 고정밀 준실시간 정밀궤도결정을 위한 대안은 이중주파수 GPS 수신기으로 IGS에서 제공되는 정밀궤도력을 갖고 고정밀 단독측위가 가능한 정밀단독측위(precise point positioning) 기법으로 상대측위와 버금가는 위치 정밀도를 얻을 수 있다. 다목적실용위성 5호는 고정밀 합성 레이더 영상 처리를 위해서 요구되는 20 cm 위성 위치 정밀도를 만족시키고, 대기 기상관측을 위해 GPS 전파 엄폐 측정값 수집을 목적으로 고정밀 이중주파수 GPS 수신기(Integrated GPS and Occultation Receiver, IGOR)를 탑재하고 있다. 이 논문에서는 IGOR의 이전 제품인 Blackjack 수신기를 탑재한 GRACE 위성의 실제 GPS 데이터를 사용하여 대략 3 ~ 5cm의 위치 정밀도를 얻었다. 준실시간 정밀궤도결정에서 정밀도 손실없이 궤도결정 처리 지연시간(latency)을 줄이는 것이 중요하다. 이 지연시간은 GPS 측정값의 양에 따라 크게 좌우되기에 GPS 측정값 샘플링 주기를 10초에서 640초까지 변화시켜가면서 정밀도를 분석한 결과, 위치 정밀도 손실없이도 궤도결정처리 지연시간을 단축시킬 수 있음을 제시하고 있다.

  • PDF

A Design of Wide-band Folded Dual Monopole Antennas (광대역 폴디드 이중 모노폴 안테나 설계)

  • Lee, Hyeon-Jin;Jung, Jin-Woo;Lim, Yeong-Seog
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.44 no.2
    • /
    • pp.69-75
    • /
    • 2007
  • In this paper, a single plane wide band microstrip antenna for integrated circuit is designed and fabricated. A new configuration for a wide bandwidth is proposed. This antenna consists of two folded microstrip monopoles, which are fed by a coplanar waveguide (CPW). Therefore In this paper is folded terminal part of dual microstrip line for variable reactance value. As a result compared the proposed folded dual microstrip monopole antenna with established dual microstrip monopole antennas, the proposed antenna can widen bandwidth more then about over 1[GHz. The characteristics of the proposed antenna were analyzed by using an FDTD methods. The proposed antenna has $1.98{\sim}4.05GHz$ bandwidth for using ISM, Wibro and DMB band.

Transmitted Noise Reduction of Piezoelectric Smart Panels using Passive/Active Method in Wide Range frequency (수동/능동적 방법을 혼용한 압전지능패널의 광대역 전달 소음저감성능)

  • 이중근;박우철
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.2 no.2
    • /
    • pp.73-79
    • /
    • 2001
  • In this paper, the transmitted noise reduction performance of piezoelectric smart panels is experimentally studied. The proposed piezoelectric smart panels are comprised of plate structure on which piezoelectric sensor/actuators are bonded and sound absorbing material is provided. It is a combination of passive and active approaches utilizing a passive effect at high frequencies and an active effect at low frequencies. To prove the concept of piezoelectric smart panels, an acoustic measurement experiment is performed. An acoustic tunnel is designed and its acoustic characteristics are tested. Below 800Hz, the tunnel exhibits a plane wave guide characteristics. When an absorbing material is bonded on a single plate, a remarkable transmitted noise reduction in mid frequency range is observed except the first resonance frequency. By enabling the active control of single smart panel with negative feedback control. about 10dB noise reduction is achieved at the resonance frequencies. The double smart panel got 4dB at the first resonance frequency and has more potential to reduce the transmitted noise in a wide range frequency. Piezoelectric smart panels incorporating passive absorbing material and active piezoelectric devices is a promising technology for noise reduction in a wide range frequency.

  • PDF

Statistical Model-Based Voice Activity Detection Using Spatial Cues for Dual-Channel Noisy Speech Recognition (이중채널 잡음음성인식을 위한 공간정보를 이용한 통계모델 기반 음성구간 검출)

  • Shin, Min-Hwa;Park, Ji-Hun;Kim, Hong-Kook
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2010.07a
    • /
    • pp.150-151
    • /
    • 2010
  • 본 논문에서는 잡음환경에서의 이중채널 음성인식을 위한 통계모델 기반 음성구간 검출 방법을 제안한다. 제안된 방법에서는 다채널 입력 신호로부터 얻어진 공간정보를 이용하여 음성 존재 및 부재 확률모델을 구하고 이를 통해 음성구간 검출을 행한다. 이때, 공간정보는 두 채널간의 상호 시간 차이와 상호 크기 차이로, 음성 존재 및 부재 확률은 가우시안 커널 밀도 기반의 확률모델로 표현된다. 그리고 음성구간은 각 시간 프레임 별 음성 존재 확률 대비 음성 부재 확률의 비를 추정하여 검출된다. 제안된 음성구간 검출 방법의 평가를 위해 검출된 구간만을 입력으로 하는 음성인식 성능을 측정한다. 실험결과, 제안된 공간정보를 이용하는 통계모델 기반의 음성구간 검출 방법이 주파수 에너지를 이용하는 통계모델 기반의 음성구간 검출 방법과 주파수 스펙트럼 밀도 기반 음성구간 검출 방법에 비해 각각 15.6%, 15.4%의 상대적 오인식률 개선을 보였다.

  • PDF

Design of Bandpass Filter with a Single Dual-Mode Resonator (하나의 이중 모드 공진기를 이용한 대역 통과 필터 설계)

  • An, Jae-Min;Lim, Yeong-Seog
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.21 no.12
    • /
    • pp.1432-1437
    • /
    • 2010
  • This paper proposes a new design method of bandpass filter with single dual-mode resonator. In the proposed method, a coupling coefficient between two resonators was obtained by considering a dual-mode resonator as two single resonators. Based on the obtained coupling coefficient, two resonant frequencies of dual-mode resonator were calculated and then arranged according to a transmission zero's location of required filter. To verify the proposed theory, two WLAN bandpass filters which have a transmission zero to a lower and an upper stopband repectively were designed and implemented.

The Broadband Auto Frequency Channel Selection of the Digital TV Tuner using Frequency Mapping Function (주파수 매핑 함수를 이용한 광대역 주파수 자동 채널 선택용 디지털 TV 튜너)

  • 정영준;김재영;최재익;박재홍
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.4B
    • /
    • pp.613-623
    • /
    • 2000
  • Digital TV tuner for 8-VSB modulation was developed with satisfying the requirements of ATSC. The double frequency conversion and the active tracking filter in the front-end were used to reduce interference of the adjacent channels and multi-channels, which suppress If beat and image band. However, it was impossible to get frequency mapping between tracking filter and first VCO(Voltage Controlled Oscillator) in the double conversion digital TV tuner differing from conventional NTSC tuner. This paper, therefore, suggests the available structure and a new method for automatic frequency selection by obtaining the mapping of frequency characteristic over tracking voltage and the combined hardware which compose of Micro-controller, EEPROM, D/A(Digital-to-Analog Converter), OP amp and switch driver to solve above problems.

  • PDF

A 0.4-2GHz, Seamless Frequency Tracking controlled Dual-loop digital PLL (0.4-2GHz, Seamless 주파수 트래킹 제어 이중 루프 디지털 PLL)

  • Son, Young-Sang;Lim, Ji-Hoon;Ha, Jong-Chan;Wee, Jae-Kyung
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.45 no.12
    • /
    • pp.65-72
    • /
    • 2008
  • This paper proposes a new dual-loop digital PLL(DPLL) using seamless frequency tracking methods. The dual-loop construction, which is composed of the coarse and fine loop for fast locking time and a switching noise suppression, is used successive approximation register technique and TDC. The proposed DPLL in order to compensate the quality of jitter which follows long-term of input frequency is newly added cord conversion frequency tracking method. Also, this DPLL has VCO circuitry consisting of digitally controlled V-I converter and current-control oscillator (CCO) for robust jitter characteristics and wide lock range. The chip is fabricated with Dongbu HiTek $0.18-{\mu}m$ CMOS technology. Its operation range has the wide operation range of 0.4-2GHz and the area of $0.18mm^2$. It shows the peak-to-peak period jitter of 2 psec under no power noise and the power dissipation of 18mW at 2GHz through HSPICE simulation.

Analysis of the Performance of Ultrasonic Transducers (초음파 탐촉자의 성능 평가법)

  • 노용래
    • The Journal of the Acoustical Society of Korea
    • /
    • v.10 no.6
    • /
    • pp.12-22
    • /
    • 1991
  • 초음파 탐촉자 성능의 이론적 평가법을 개발해 이중소자 탐촉자에 적용하였다. 본 방법은 탐촉 자의 발신, 회절, 수신특성을 주파수, 시간 영역에서 평가할 수 있으며, 특히 시간영역에서는 통상 사용 하는 역푸리에 변환법에 의존하지 않고 음파의 투과, 반사 특성을 고려해 파형을 직접 구할 수 있다.

  • PDF

Analysis of Characteristics of Ku/C Band Modified Square Loop Frequency Selective Surface (Ku/C 밴드 변형된 사각 루프 주파수 선택 반사기 특성 해석)

  • 노행숙;이동진;최학근
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.11 no.2
    • /
    • pp.186-196
    • /
    • 2000
  • In this paper, modified square loop frequency selective surface for dualband communication antenna systems is proposed, and the scattering characteristics is discussed. The analysis for the problem of scattering by periodic structures with a dielectric slab is formulated using the spectral-domain immittance approach and Floquet's theorem. The method of moments which uses rooftop subdomain basis function is employed to solve the equations. Numerical results include the comparison between the transmission characteristic of general square loop and that of modified square loop. Also, the transmission characteristics of modified square loop for arbitrary incident angle and polarization is presented. To verify analysis results, modified square loop frequency selective surface was fabricated and the calculated results were compared with the measured results. The measured results showed good agreement with the calculated results.

  • PDF