• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1206-1211
• /
• 2006

In this paper, a Balun-BPF with the balun and BPF characteristics is proposed by using dual-mode ring resonator of $1{\lambda}$. We obtained the property of balun with the phase imbalance by symmetrically placing each output of ring resonator. The dual mode has been made by impedance difference between input and output lines. The fabricated Balun-BPF shows bandwidth of 40 MHz and insertion loss of 2.4 dB at a center frequency of 2.45 GHz. It shows the phase imbalance of $180{\sim}184$ degree and the magnitude imbalance of within 1 dB. The measured frequency responses agree well with simulated ones.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.61-69
• /
• 2016

This study is the results related to the combustion instability phenomenon with respect to combustor length and thermal power as variables in dual swirling combustor configuration. Especially, the beating phenomena having the insensitive resonance frequency of relatively constant peaks are observed when the combustor lengths increase in a lower power regime. This beating phenomenon might be occurred due to the interacting behaviors of pilot and main burners with different periods. Therefore, such insensitive response seems to be a result of the beating phenomenon with interaction between the pilot and main flames even though the combustor lengths are increased.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1003-1008
• /
• 2017

In this paper, we studied the design and fabrication of double T Structure with CPW antenna at around 5 GHz band.. To improve of frequency properties of antenna, Double T Structure with CPW antenna was simulated by HFSS(: High Frequency Structure Simulator). A double T Structure with CPW antenna was designed and fabricated by photolithograph on an FR4 substrate (dielectric constant of 4.4 and thickness of 1.6 mm). The fabricated A double T Structure with CPW antenna showed a center frequency, the minimum return loss and impedance were 5.29GHz, -34dB, and 390MHz, $49.6{\Omega}$ respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.709-715
• /
• 2002

In this paper, a novel low profile dual feeding microstrip antennas with microstrip and H-shaped aperture feeding are proposed to achieve high isolation and easy feeding, and the validity of the proposed antennas is demonstrated experimentally. In the proposed single and 1$\times$4 array antenna, the measured isolations are less than -49 dB and -48 dB, impedance bandwidths are 4 % at 12.5 GHz and 2.1 % at 14.25 GHz for the VSWR<1.5 in both antennas and maximum gains are 8.25 dBi and 14.2 dBi.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.125-135
• /
• 2001

A 8$\times$4 microstrip antenna array is designed at 5.3 GHz and its characteristics are investigated with respect to the application in dual polarized synthetic aperture radars. The design is focused on the achievement of a wide bandwidth, a high polarization purity, a low loss, a good isolation and some mechanical requirements suitable for the application. The antenna is fed by a -3 dB tapered feed network, and is composed of dual polarized SSFIP (Strip-Slot-Foam-Inverted Patch) elements with honeycomb and shielding plane. Simulation results for the antenna array are presented and compared with measurements. It is observed that the antenna shows a bandwidth of 80 MHz, a polarization isolation better than 20 dB, an isolation of 40 dB, and good mechanical characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.19-25
• /
• 2002

This paper presents novel architectures for power amplifier (PA) relying on 3rd harmonic-tuning technique and dual feeding antenna structure for the isolation of the Tx and the Rx ports. Active integrated antenna (AIA) with power amplifier makes the problem of the isolation between the Tx and the Rx ports occur So, this paper suggests dual feeding and dual resonant structures of the AIA with PA are possible to obtain the high isolation between the Tx and the Rx signals. Dual resonant triangular microstrip antenna, which can replace power amplifier tuning circuit, with slots-loaded and characteristic of the isolation between the Tx and the Rx ports using inset microstrip line feeding and probe feeding methods is proposed and experimentally studied for the case of thin substrate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.167-177
• /
• 1996

The cutoff frequencies of a double ridged rectangular waveguide are calculated by applying the modal analysis to its cross-section. And the characteristic impedance of its $TE_{10}$ mode is evaluated in a frequency range of 6 to 18 GHz. When both ends of a linearly tapered rectangular wa- veguide consists of single and double ridged rectangular cross-sections, the equivalent nonuniform transmission line of its $TE_{10}$ mode is solved numerically. It is shown that the input impedance at its single ridged terminal becomes nearly constant in the wide bandwidth.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.6
• /
• pp.563-570
• /
• 2015

In this paper, Finite Element Analysis (FEA) for gear heat treatment using simultaneous dual frequency (SDF) induction heating is conducted. To do this, thermal-electromagnetic coupled FE model is built. A two dimensional FE model of gear and heater is introduced to reduce computation time. For more time-efficient analysis, harmonic analysis for electromagnetic model is adopted and transient analysis model, for heat transfer model. Through the coupled analysis, it can be found that the proposed FE model can solve for SDF induction heating of gear and heat treatment parameters can also be determined.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.101-105
• /
• 2001

본 논문에서는 전력증폭기를 슬롯이 적재된 삼각형 마이크로스트립 패치 안테나와 동일 평면의 기판에 집적화하여 전력증폭기 출력단의 제 3 고조파 튜닝을 안테나가 수행함으로써 전력효율을 향상시키는 효과에 대해 고찰하였다. 또한 실제 집적화에 따른 송\ulcorner수신 신호의 분리 문제를 위해 이중공진 특성을 이용한 inset 마이크로스트립 급전과 coax 급전의 이중급전 방식을 사용하였고, 이에 따라 두 ports 사이에 높은 격리 특성을 갖도록 능동 집적 안테나를 설계하였다. 선형성을 증대시키기 위해 제 3 고조파 튜닝 효과를 갖도록 안테나에 슬롯을 적재시켜 제 3 고조파에서 방사를 억제 구조를 갖게 함으로써 고조파 튜닝회로를 축소시킨 능동 집적 안테나를 설계, 제작하여 측정한 결과, B급 전력증폭기와 안테나를 각각 제작하여 결합한 형태보다 약 5%의 전력 효율 개선 효과를 얻을 수 있었다. 그리고 능동 집적 안테나의 큰 문제점이었던 송\ulcorner수신 분리에 대하여서도, IMT-2000 주파수 대역의 수신 port에서 송신 주파수의 신호를 -35dB 이하로 격리시키는 특성을 나타냄을 관찰할 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7A
• /
• pp.709-716
• /
• 2006

본 논문에서는 무선 센서 네트워크의 다양한 응용 환경 및 상/하향 트래픽 스트림의 특성에 따라 유연하게 적용할 수 있는 새로운 매체접근제어 프로토콜을 제안한다. HiPERMAC(Hierarchically-Paired Evolutionary Radio MAC)이라고 불리는 제안 매체접근제어방식은 다양한 클러스터링 방식에 의하여 구축된 다 계층 (Hierarchical) 네트워크에서 별도의 대역 확산 전송방식이나 다수의 주파수 채널을 사용하지 않고, 단 2개의 시간 구간을 공간적으로 재활용하여 N 계층의 개별적인 통신이 가능한 구조를 제공한다. 즉, 제안방식은 단일 주파수 개념을 이용하여 계층화된 우선 센서 네트워크를 계층적 이중화(Hierarchically-Paired)하고 이때 발생하는 클러스터 간 상호 간섭의 요인들을 시간 및 공간적으로 분리하여 망 확장성과 자원 효율성을 극대화 하는 새로운 매체접근 제어 방식 이다.