• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.588-592
• /
• 2016

선박의 최적 운항 자세를 찾기 위해 자유 수면을 포함한 저항 해석을 수행할 경우 많은 격자를 이용한 비정상 해석으로 인해 계산 시간이 오래 소요되는 단점이 있다. 본 연구에서는 이를 개선하여 이중 모형을 이용한 정상 해석을 통해 보다 효율적으로 선박의 최적 운항 자세를 도출하는 방법을 연구하였다. KCS를 대상선으로 선정하여 설계속도(24knots)와 저속(15knots)인 경우에 대하여 평형 상태 및 선수/선미 트림 상태에서 이중 모형 수치해석을 수행하고 기존의 연구결과와 비교하였다. 그 결과 자유수면 유무와 속도에 상관없이 선체 자세에 따른 저항 값은 동일한 경향을 갖는 것을 확인하였다. 하지만 저속일 경우 트림조건에 따른 저항의 변화의 폭에서 차이를 보였으며, 이는 압력저항에 기인한 것이다. 따라서 이중 모형을 이용한 저항 해석은 압력저항의 변동이 큰 경우에는 적용되기 어렵다는 한계점이 있다. 하지만 마찰 저항이 주요한 경우에 적용되어 계산효율을 획기적으로 높일 수 있으며, 정성적인 경향을 제시할 수 있는 타당한 방법이라 사료된다.

• Journal of Korea Water Resources Association
• /
• v.52 no.4
• /
• pp.301-312
• /
• 2019

The importance of the dual drainage system model has increased as the urban flood damage has increased due to the increase of local storm due to climate change. The dual drainage model is a model for more accurately expressing the phenomena of surface flow and conduit flow. Surface runoff and pipe runoff are analyzed through the respective equations and parameters. And the results are expressed visually in various ways. Therefore, inundation analysis results of dual drainage model are used as important data for urban flood prevention plan. In this study, the applicability of the COBRA model, which can be interpreted by combining the dual drainage system with the natural watershed and the urban watershed, was investigated. And the results were compared with other dual drainage models (XP-SWMM, UFAM) to determine suitability of the results. For the same watershed, the XP-SWMM simulates the flooding characteristics of 3 types of dual drainage system model and the internal flooding characteristics due to the lack of capacity of the conduit. UFAM showed the lowest inundation analysis results compared with the other models according to characteristics of consideration of street inlet. COBRA showed the general result that the flooded area and the maximum flooding depth are proportional to the increase in rainfall. It is considered that the COBRA model is good in terms of the stability of the model considering the characteristics of the model to simulate the effective rainfall according to the soil conditions and the realistic appearance of the flooding due to the surface reservoir.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1297-1301
• /
• 2007

홍수위 산정을 위하여 이용되는 기법은 평균적인 홍수위 산정이 가능한 1차원모형과 하천 좌우의 수심 편차까지 해석이 가능한 2차원 모형 및 수심에 대한 변동까지 해석이 가능한 3차원 모형으로 구분된다. 이중에서 기본계획 수립시 사용되는 모형은 1차원 수치해석 모형으로 하천 단면별로 평균홍수위 만을 산정하므로 만곡부하천의 특성의 영향이 반영되지 않고 있는 실정이다. 따라서 본 연구는 만곡부 하천을 선정하여 총2.4Km구간의 모형을 제작하였으며, 수리모형 실험을 통하여 일차원 및 이차원 수치해석을 실시하여 모형실험값과 비교 고찰하였다. 본 연구를 위하여 일차원 수치해석은 HEC-RAS모형을, 이차원 수치해석에서는 SMS모형을 사용 하였다. 연구결과, 유속의 경우 우안지점의 평균 유속은 모형실험은 8.33m/s, 일차원 및 이차원 수치해석은 각각 3.08m/s, 8.57m/s로 나타남을 확인 하였으며, 평균유속은 이차원 수치해석이 모형실험과 유사한 값을 보였다. 또한 수위경우는 모형실험의 좌안과 우안에 대한 일차원 및 이차원 수치해석의 최대 오차는 각각 0.66m, 0.84m와 0.28m, 0.48m로 수위 또한 이차원 수치해석이 수리모형실험과 유사한 결과를 보였다. 따라서 본 연구를 통하여 알 수 있듯이 만곡부 하천의 경우 일차원 수치해석보다는 2차원수치해석을 실시하여 기본계획을 수립하는 것이 바람직할 것으로 판단된다.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.211-218
• /
• 2010

Volume of concrete slab changes by temperature and moisture effects. At that time, tensile stress develops because the slab volume change is restrained by friction resistance between the slab and subbase, and then crack occurs occasionally. Accordingly, researchers have made efforts to figure out the friction characteristics between the slab and subbase by performing push-off tests. Lately, researches to analyze concrete pavement behavior by the friction characteristics have been performed by finite element method. In this study, The friction characteristics between the slab and subbase were investigated based on the friction test results for lean concrete, aggregate, and asphalt subase widely used in Korean concrete pavements. The energy method bilinearizing relation between nonlinear friction resistance and displacement were suggested. The friction test was modeled by 3-D finite element program, ABAQUS, and the model was verified by comparing the analyzed results to the test results. The bilinear model developed by the energy method was validated by comparing analysis results obtained by using the nonlinear and bilinear friction resistance displacement relation as input data. A typical Korean concrete pavement was modeled by ABAQUS and EverFE and analyzed results were compared to evaluate applicability of the bilinear model.

• Journal of Convergence for Information Technology
• /
• v.11 no.12
• /
• pp.115-126
• /
• 2021

This study develops a simulation model that performs flood analysis considering both urban and river flood. For the analysis of river flood, this study considers river overflow by levee breach, and reflects the concept of the dual drainage systems for the analysis of urban flood. In relation to the surface flood analysis, FEM technique is applied to the flood diffusion analysis in order to conduct the flow analysis of urban and river flood simultaneously. For the verification of the model, it is first applied to the conceptual model, and then applied to the actual watershed. It is expected that this study will be able to reduce flood damage and to prepare effective countermeasures to reduce flood damage.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.103-117
• /
• 1995

A design-oriented method for analysis of the structural damage due to ship collisions is developed by using the idealized structural unit method(ISUM). The method takes into account yielding, crushing, rupture, the coupling effects between local and global failure of the structure, the influence of strain-rate sensitivity and the gap/contact conditions. The method is verified by a comparison of experimetal and numerical results obtained from test models of double-skin plated structures in collision/grounding situations with the present solutions. As an illustrative example, the method has been used for analyses of a side collision of a double-hull tanker. Several factors affecting ship collision response. namely the collision speed and the scantlings/arrangements of strength members, are discussed.

• Journal of Korea Water Resources Association
• /
• v.40 no.3
• /
• pp.223-236
• /
• 2007

Recently in urban area flood damages increase due to local concentrated heavy rainfall. Even in the cities where stormwater drainage systems are relatively well established flood damage still occurs because of the capacity limitations of the existing stormwater drainage systems. When the flood exceeds the capacity limitation of the urban storm sewer system, it yields huge property losses of public facilities involving roadway inundation to paralyze industrial and transportation system of the city. To prevent such flood damages in urban area, it is necessary to develop adequate inundation analysis model which can consider complicated geometry of urban area and artificial drainage system simultaneously. The Dual-Drainage model used in this study is the urban inundation analysis model which combines SWMM with DEM based 2-dimensional surface flood inundation model. In this study, the dual drainage model has been modified to consider the effect of complex buildings in urban area. Through the simulation of time variable inundation process, it is possible to identify inundation alert locations as well as to establish emergency action plan for the residencial area vulnerable to flood inundation.

• Journal of Korea Water Resources Association
• /
• v.50 no.4
• /
• pp.263-275
• /
• 2017

Integrated numerical approaches with physically-based conceptualization are required for accurate urban inundation simulation. In this study, we described, applied and analyzed an integrated 1-dimensional (1D) sewerage system and 2-dimensional (2D) surface flow model, which was suggested by Lee et al. (2015). This model was developed based on dual-drainage concept, and uses storm drains as an discharge exchange spot rather than manholes so that interaction phenomena between surface flow and sewer pipe flow are physically reproduced. In addition, the building block concept which prevents inflows from outside structures is applied in order to consider building effects. The capability of the model is demonstrated via reproducing the past flooding event at the Sadang-cheon River catchment, Seoul, South Korea. The results show the plausible causes of the inundation could be analysed in detail by integrated 1D-2D modeling.

• Journal of Korea Water Resources Association
• /
• v.47 no.9
• /
• pp.801-812
• /
• 2014

In this study, average rainfall of basin was estimated and compared with that obtained from Biseulsan dual polarization RADAR. And the runoffs are estimated using Vflo distribution model for Habcheon reservoir basin and Huicheon basin. In the rainfall estimation using dual polarization RADAR, the rainfall was estimated by using the specific phase difference and differential reflectivity of dual polarization RADAR variables. As a result, for all events rainfall estimation using dual polarization RADAR has the closest value to the gauge rainfall in terms of the peak rainfall and total rainfall. Also, runoff simulation results from dual polarization RADAR show the better results. It is concluded that the method using dual polarization radar can improve the accuracy more than a single polarization radar using only horizontal reflectivity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1658-1662
• /
• 2009

최근 들어 기후 변화로 인한 이상 강우 현상과 기록적인 집중 강우로 탁수 발생의 빈도와 강도가 증가하고, 탁수의 장기간 하류 방류로 인해 경제적인 피해가 발생할 뿐만 아니라 환경적으로도 중요한 문제로 대두되고 있다. 저수지로 유입된 탁수의 시공간적 분포 예측 결과의 신뢰도는 탁수 밀도류 해석의 정확도에 가장 큰 영향을 받으므로 유입 하천수의 밀도 거동에 대한 정확한 해석이 필요하다. 따라서 탁수의 거동해석은 수리 및 수질의 연동 모의(Coupled modeling)가 필수적이다. 본 연구의 목적은 수리 및 수질의 연동 해석이 가능한 2차원 횡 방향 평균 모형(CE-QUAL-W2)을 소양호에 구축하고, 기록적인 강우 사상을 보인 2006년 수문조건에서의 모형의 적용성과 한계점을 평가하는데 있다. 구축한 소양호 탁수 예측 모델을 2006년 탁수사상에 적용한 결과, 홍수 사상으로 이중 첨두 유량이 발생한 후 저수지 내에서 중층 밀도류와 바닥밀도류의 두 가지 밀도류 형태가 혼재하여 진행되는 현상이 적절히 모의되었다. 하지만, 저수지내에서 측정한 탁수 수괴(plume)의 시공간적 수직분포(profiles)는 모의결과와 다소 편차를 보였으며, 특히 저수지 바닥 인근에서 모델은 실측값을 과대평가 하였다. 오차의 원인은 모델 입력 자료의 불확실성과 수치모델의 불확실성으로 판단된다. 따라서 향후 탁수 거동 모델링과정의 불확실성을 최소화하고 모의결과의 신뢰도를 개선하기 위해서 극한탁수 사상에서 발생하는 수리학적 현상과 SS 입자 동력학에 대한 이론적 연구와 입력 자료의 정확한 산정을 위한 현장 실험이 필요하다.