• Composites Research
• /
• v.37 no.1
• /
• pp.7-14
• /
• 2024

Due to the structural characteristic of a double roller, the double roller can have various deformation behaviors depending on a gap block design, even if dimensions and loading conditions for the double roller are the same. Based on this feature, we propose a strategy for designing the gap block of the carbon-fiber reinforced plastic (CFRP) double roller to minimize defects (e.g., sagging and wrinkling), which can be raised during the product conveying process, with the pursue of the lightweight design. In the suggested strategy, analysis cases are first selected by considering main design parameters and engineering tolerances of the gap block, and then deformation behaviors of these selected cases are extracted using the finite element method (FEM). Here, to obtain the optimal gap block parameters that satisfy the purpose of this study, deformation deviations in the contact area are calculated and compared using the extracted deformation behaviors. Note that the contact area in this work is located between the product and the roller. As a result, through the design method of the gap block proposed in this work, it is possible to construct the CFRP double roller that can significantly decrease the defects without changing the overall sizes of the roller. A detailed method is suggested herein, and the results are evaluated in a numerical way.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2859-2862
• /
• 1999

본 논문은 이중구조의 고장허용형 마이크로콘트롤러 구조를 제시한다. 제시한 마이크로콘트롤러는 두 프로세서 모듈간의 동작을 비교하여 하나의 프로세서 모듈에 고장이 발생할 경우 콘트롤러의 외부 인터페이스를 차단한다. 이후 각 프로세서 모듈은 자체 점검을 통해 상태를 판단하고, 이상이 발견되지 않을 경우, 마이크로콘트롤러는 외부 인터페이스 기능을 수행할 주 모듈을 선정하고 다시 동작을 시작한다. 따라서 제시한 마이크 로콘트롤러는 고장정지 특성 및 일시적인 고장으로부터의 회복 기능을 갖는다. 본 논문에서는 제시한 구조를 모토롤라 Mc68360 프로세서와 범용 로직 IC를 이용하여 구현하고 고장주입을 통해 제시한 구조의 고장허용 특성을 확인 한다.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2942-2945
• /
• 2000

본 논문은 필드버스 인터페이스를 위한 이중구조의 결함내성형 마이크로콘트롤러 구조를 제시하고, 테스트 환경을 구축하여 고장허용 기능을 검증한다. 이중구조의 결함내성형 마이트로 콘트롤러는 두 개의 프로세서 모듈의 출력을 비교하여 고장을 발견하고, 고장을 발견한 경우 버스 출력을 차단함으로써 전체 시스템의 오동작을 방지한다. 일단 고장을 발견하면 자체 진단을 통해 고장 상태를 판다하여, 영구적인 고장일 경우 정지하고 일시적인 고장일 경우에는 재시작을 통해 정상동작으로 복귀함으로써, 고장정지 및 일시적인 고장으로부터의 회복기능을 제공한다. 이중구조의 결함내성형 마이크로 콘트롤러에 필드버스 인터페이스 기능을 추가하여 자체적인 응용 노드로서의 기능을 수행할 수 있도록 한다. 그리고 이러한 노드를 MC68360프로세서를 이용하여 구현하고, 인위적인 고장주입을 통하여 그 기능을 검증한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.134-143
• /
• 1999

The ship's bows and sterns are assembled with the curved blocks. In shipyards, the roller bending and the line heating or others are being used to fabricate such doubly curved shell. Firstly, the cylinder- or cone-type is formed through the roller bending, and then, the line heating is implemented to form the rest. This paper presents an algorithm to determine the direction for the roller bending and the shape to be formed as fabrication information. The direction for the roller bending is determined with Gauss mapping of the desired surface and the shape to form is calculated by comparing the bent shape with the desired shape.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.1
• /
• pp.20-27
• /
• 2018

In this paper, the problem of a double-parked car has been investigated and a method to solve it is studied. Double parking is very common in a public parking lot with insufficient parking space. If a double-parked car blocked the way, a person needs to push the double-parked car to move it. The problem is that moving a double-parked car with hands is very hard and dangerous, especially for the old and the weak. To solve the above mentioned problem, an automatic mover for a double-parked car is proposed and developed. The basic idea is that a double-parked car can be moved by rolling its one wheel. Two rollers are designed and manufactured, which are used to roll a wheel of a double-parked car. The developed automatic mover has two rollers, two driving wheels, and four castors. It also has several ultrasonic sensors so that it can detect obstacles in the way and prevent possible collision. It is verified through several experiments that the developed automatic mover can move a double-parked car safely and easily.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.339-342
• /
• 2000

본 논문에서는 DSP와 RISC 마이크로 콘트롤러의 결합으로 구성된 이중 코어 DSP를 이용하여 휴대장치에 적합한 저전력 MPEC-2 계층-III 복호화기의 구조를 제안하고 실시간 시스템을 구현하였다. 제안된 시스템은 디지털 오디오 데이터 처리부와 시스템 제어 정보처리부로 나누어 병렬처리가 가능한 구조이다. 디지털 오디오데이터 처리부에서는 DSP의 강력한 산술연산기능으로 MPEG 복호화 알고리듬을 수행하며 시스템 제어부에서는 마이크로 콘트롤러의 장점인 저가, 저전력의 제어 기능으로 사용자 인터페이스 및 파일 관리, 비트스트림 제어를 담당하도록 구성된다. 입력부에서는 Multi Meadia Card(MMC)를 지원하고, PC와 호환 가능하도록 파일 관리 시스템으로 운용되며 직렬 통신의 데이터 전송과 16비트 해상도 및 최대 48kHz 표본화주파수로 스테레오 출력이 가능하다. 구현된 시스템은 이중 코어를 이용하여 DSP의 연산량 및 동작속도의 감소로 인한 저가, 저전력의 효과로 인해 휴대장치에 적합하다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.4
• /
• pp.144-151
• /
• 2002

This paper presents a fault-tolerant duplex architecture to build a high-reliability microcontroller using commercial VLSI processors. The architecture supports fail-silence under all single-failure situations and facilitates recovery from transient failures. The paper implements the duplex architecture using two Motorola MC68360 processors and evaluates its fault tolerance in a real application environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1905-1913
• /
• 2006

The researches about the hardware and the software implementing ubiquitous sensor network have great rush in recent years. This paper deals the development of a sensor node with the dual interface which also has an RF wireless interface while has an Bluetooth interface used widely in present. This sensor node includes a Atmeg32 microcontroller, a Bluetooth module, a RF module. a temperature-humidity sensor. and I also develop the F/Ws controlling each modules with C language using GCC compiler. The sensor node developed can reaches 15m with Bluetooth interface and 60m with RF interface. It works stably with the voltage above 5V and it consumes currents 21mA average in idle mode, 63mA average in active mode.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.38-43
• /
• 2002

Die-less forming is a cold forming process which is to bend thick flat plates into compound curved plates using two asymmetric rollers. This forming method has several advantages compared with line heating which is widely used to fabricate compound curved pieces in shipyards. The die-less forming, however, has scarcely been studied. Even the deformation mechanism in this forming process has not been understood clearly. So, in this paper, the deformation characteristics of die-less forming is investigated analytically and numerically. for the analytic investigation, slab method based on equilibrium equation is applied. And the mechanism of curvature generation is derived for the asymmetry in roller applied. And three dimensional numerical analyses are performed with realistic modeling of interactions between the rollers and work-piece using finite element program, ABAQUS. It is shown that curvature generation is mainly due to the difference of normal positive strain distribution between the top and bottom surface of the work-piece. And a convex-type curved plate is formed if the center region of the work-piece is rolled with asymmetric rollers of which the lower is larger than the upper in diameter.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.3
• /
• pp.264-271
• /
• 1995

This paper presents the data parallel processing method between a PC and a micro-controller. To implement the method a dual port RAM for a real time data processing is used. In general an A/D & D/AC card is used to send or receive the data into or from the external plant and the PC does only the computation of the A/D and the D/A data because the A/D & D/AC card does not have the ability of computation. In this study, a data parallel processing method in which the PC and micro-controller own a common dual port RAM, is introduced, so that the PC can compute the A/D and D/A data and control the plant simultaneously. The PC system with a micro-controller and the common dual port RAM is designed and its effectiveness is investigated experimentally considering the performance of both the computation of data and the controlling and monitoring the external plant.