• 수산해양기술연구
• /
• 제34권1호
• /
• pp.85-95
• /
• 1998

어종의 식별을 위한 수중음향학적 정보를 수집하는 데 사용하기 위한 광대역 초음파 변환기를 개발할 목적으로 저주파용 Tonpilz형 초음파 변환기를 설계, 제작하고, 이 변환기의 음향 방사면에 $Al_2O_3$와 epoxy 수지를 서로 혼합하여 생성한 복합재료층과 폴리우레탄 수지로서 제작한 음향 정합층을 각각 직렬 접착시킨 복합구조 초음파 변환기의 광대역 주파수 특성에 대하여 분석, 고찰한 결과를 요약하면 다음과 같다. 1) Tonpilz형 transducer (head mass : 알류미늄 / 두께 22.0 mm, tail mass : 황동 / 두께 15.0 mm )의 음향 방사면에 두께 7.0 mm의 $Al_2O_3$와 epoxy 수지로서 생성한 복합재료층의 두께 18.0 mm의 폴리우레탄 수지로서 제작한 정합층을 직열접착한 복합 구조 초음파 변환기의 - 3 dB점에 대한 하한 및 상한 주파수 범위는 35.0~42.3 kHz (${\Delta}f=7.3 kHz)$이었고, 이 주파수 구간에 있어서의 송파전압감도의 최대치는 135.7 dB re $1\;{\mu}Pa/V$ 이었다. 2) Tonpilz형 transducer (head mass : 알류미늄 / 두께 23.0 mm, tail mass : 황동 / 두께 15.0 mm )의 음향 방사면에 두께 11.0 mm의 $Al_2O_3$와 epoxy 수지로서 제작한 복합재료층과 두께 15.8.0 mm의 폴리우레탄 수지로서 제작한 정합층을 직열접착한 복합 구조 초음파 변환기의 - 3 dB점에 대한 하한 및 상한 주파수 범위는 35.5~41.73 kHz (${\Delta}f=6.2 kHz)$이었고, 이 주파수 구간에 있어서의 송파전압감도의 최대치는 136.3 dB re $1\;{\mu}Pa/V$ 이었다. 3) 본 연구에서 시작한 복합구조 초음파 변환기에 chirp 신호(펄스 폭 4 ms, 중심주파수 40 kHz, 대역폭 40 kHz)를 인가하고, 수중방사음역에 있어서의 시간응답특성을 조사한 결과, 그 응답특성은 송신전압감도의 주파수특성과 매우 잘 일치하는 경향을 나타내었다. 이상의 결과로부터 본 연구에서 설계, 제작한 이중정합층을 갖는 복합구조 초음파 변환기는 단순구조의 Tonpilz형 초음파 변환기와 비교하여 비록 송파전압감도에 있어서는 약 5 dB 정도의 음향출력의 손실이 불가피하지만, 그 대신 주파수 대역폭을 약 5 재 정도 확대시킬 수 있는 장점이 있기 때문에 이 넓은 주파수 대역을 효과적으로 활용하면 어종식별을 위한 음향산란신호를 정량적으로 수집 및 평가하는 것이 가능하다고 판단된다.

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.147-159
• /
• 1995

This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.